[U-Boot] [PATCH] colibri_vf: Read kernel and device tree from static UBI volumes

[Sanchayan Maity]

Our update scripts write the kernel and device tree in seperate
UBI volumes. This allows to use a lot less UBI/UBIFS support in
U-Boot, which should lower the risk of hitting bugs in this area.

Signed-off-by: Sanchayan Maity <maitysanchayan at gmail.com>
---
 include/configs/colibri_vf.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index be773a3..4c82fed 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -114,9 +114,9 @@
 	"ubiboot=run setup; " \
 	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
-	"ubi part ubi && ubifsmount ubi0:rootfs && " \
-	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
-	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
+	"ubi part ubi && " \
+	"ubi read ${kernel_addr_r} kernel && " \
+	"ubi read ${fdt_addr_r} dtb && " \
 	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
-- 
2.10.2