[U-Boot] [PATCH 2/2] armv8: ls2080aqds: Add support for SD boot

[Priyanka Jain]

Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
Signed-off-by: Abhimanyu <abhimanyu at nxp.com>
---
Depends on 
For correct type of image creation: 
	https://patchwork.ozlabs.org/patch/671466/
For proper functonality on reverting below patch
	ARM: Rework and correct barrier definitions

 configs/ls2080aqds_sdcard_defconfig |   49 +++++++++++++++++++++++++++++++++++
 include/configs/ls2080a_common.h    |    3 ++
 include/configs/ls2080aqds.h        |    7 +++++
 3 files changed, 59 insertions(+), 0 deletions(-)
 create mode 100644 configs/ls2080aqds_sdcard_defconfig

diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig
new file mode 100644
index 0000000..985364c
--- /dev/null
+++ b/configs/ls2080aqds_sdcard_defconfig
@@ -0,0 +1,49 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080AQDS=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_FSL_DDR4=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="LS2080A"
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_SPL=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 3828058..2d19357 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -263,6 +263,9 @@ unsigned long long get_qixis_addr(void);
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x80400000
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x8b0
 #endif
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index a87d13a..1d69481 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -170,12 +170,14 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_LBMAP_DFLTBANK		0x00
 #define QIXIS_LBMAP_ALTBANK		0x04
 #define QIXIS_LBMAP_NAND		0x09
+#define QIXIS_LBMAP_SD			0x00
 #define QIXIS_LBMAP_QSPI		0x0f
 #define QIXIS_RST_CTL_RESET		0x31
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
 #define QIXIS_RCW_SRC_NAND		0x107
+#define QIXIS_RCW_SRC_SD		0x40
 #define QIXIS_RCW_SRC_QSPI		0x62
 #define	QIXIS_RST_FORCE_MEM		0x01
 
@@ -239,6 +241,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_PAD_TO		0x20000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 * 1024)
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET		0x200000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			0x20000
 #endif
 #else
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
-- 
1.7.4.1