[U-Boot] [PATCH v6 08/21] sf: Add INFO6 flash_info macro

[Jagan Teki]

INFO6 is for tabulating 6 byte flash parts, Ex: S25FS256S_64K

Cc: Bin Meng <bmeng.cn at gmail.com>
Cc: York Sun <york.sun at nxp.com>
Cc: Vignesh R <vigneshr at ti.com>
Cc: Mugunthan V N <mugunthanvnm at ti.com>
Cc: Michal Simek <michal.simek at xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Jagan Teki <jagan at openedev.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Jagan Teki <jagan at openedev.com>
Tested-by: Jagan Teki <jagan at openedev.com>
---
 drivers/mtd/spi/sf_params.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
index d46a276..d0c978e 100644
--- a/drivers/mtd/spi/sf_params.c
+++ b/drivers/mtd/spi/sf_params.c
@@ -27,6 +27,21 @@
 		.page_size = 256,					\
 		.flags = (_flags),
 
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
+		.id = {							\
+			((_jedec_id) >> 16) & 0xff,			\
+			((_jedec_id) >> 8) & 0xff,			\
+			(_jedec_id) & 0xff,				\
+			((_ext_id) >> 16) & 0xff,			\
+			((_ext_id) >> 8) & 0xff,			\
+			(_ext_id) & 0xff,				\
+			},						\
+		.id_len = 6,						\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = 256,					\
+		.flags = (_flags),
+
 /* SPI/QSPI flash device params structure */
 const struct spi_flash_info spi_flash_ids[] = {
 #ifdef CONFIG_SPI_FLASH_ATMEL		/* ATMEL */
-- 
1.9.1