[U-Boot] [PATCH RESEND 3/9] w1: Add 1-Wire uclass

Maxime Ripard maxime.ripard at free-electrons.com
Tue Nov 8 11:19:23 CET 2016


We might want to use 1-Wire devices connected on boards such as EEPROMs in
U-Boot.

Provide a framework to be able to do that.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 drivers/Kconfig        |   2 +-
 drivers/Makefile       |   1 +-
 drivers/w1/Kconfig     |  17 +++-
 drivers/w1/Makefile    |   2 +-
 drivers/w1/w1-uclass.c | 259 ++++++++++++++++++++++++++++++++++++++++++-
 include/dm/uclass-id.h |   1 +-
 include/w1.h           |  47 ++++++++-
 7 files changed, 329 insertions(+), 0 deletions(-)
 create mode 100644 drivers/w1/Kconfig
 create mode 100644 drivers/w1/Makefile
 create mode 100644 drivers/w1/w1-uclass.c
 create mode 100644 include/w1.h

diff --git a/drivers/Kconfig b/drivers/Kconfig
index e8c9e0a32626..74194b0d6f7f 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -84,6 +84,8 @@ source "drivers/usb/Kconfig"
 
 source "drivers/video/Kconfig"
 
+source "drivers/w1/Kconfig"
+
 source "drivers/watchdog/Kconfig"
 
 config PHYS_TO_BUS
diff --git a/drivers/Makefile b/drivers/Makefile
index 761d0b3e85b4..543c43bb0d23 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -91,6 +91,7 @@ obj-y += input/
 obj-y += soc/
 obj-$(CONFIG_REMOTEPROC) += remoteproc/
 obj-y += thermal/
+obj-y += w1/
 
 obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 endif
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
new file mode 100644
index 000000000000..0c056b4c06a9
--- /dev/null
+++ b/drivers/w1/Kconfig
@@ -0,0 +1,17 @@
+#
+# W1 subsystem configuration
+#
+
+menu "1-Wire support"
+
+config W1
+	bool "Enable 1-Wire controllers support"
+	depends on DM
+	help
+	  Support for the Dallas 1-Wire bus.
+
+if W1
+
+endif
+
+endmenu
diff --git a/drivers/w1/Makefile b/drivers/w1/Makefile
new file mode 100644
index 000000000000..26820fa209e1
--- /dev/null
+++ b/drivers/w1/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_W1) += w1-uclass.o
+
diff --git a/drivers/w1/w1-uclass.c b/drivers/w1/w1-uclass.c
new file mode 100644
index 000000000000..f9224746806c
--- /dev/null
+++ b/drivers/w1/w1-uclass.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright (c) 2015 Free Electrons
+ * Copyright (c) 2015 NextThing Co.
+ *
+ * Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <w1.h>
+
+#include <dm/device-internal.h>
+
+#define W1_MATCH_ROM	0x55
+#define W1_SKIP_ROM	0xcc
+#define W1_SEARCH	0xf0
+
+struct w1_bus {
+	u64	search_id;
+};
+
+struct w1_device {
+	u64	id;
+};
+
+static int w1_new_device(struct udevice *bus, u64 id)
+{
+	struct w1_driver_entry *start, *entry;
+	int n_ents, ret = -ENODEV;
+	u8 family = id & 0xff;
+
+	debug("%s: Detected new device 0x%llx (family 0x%x)\n",
+	      bus->name, id, family);
+
+	start = ll_entry_start(struct w1_driver_entry, w1_driver_entry);
+	n_ents = ll_entry_count(struct w1_driver_entry, w1_driver_entry);
+
+	for (entry = start; entry != start + n_ents; entry++) {
+		const struct driver *drv;
+		struct w1_device *w1;
+		struct udevice *dev;
+
+		if (entry->family != family)
+			continue;
+
+		drv = entry->driver;
+		ret = device_bind(bus, drv, drv->name, NULL, -1,
+				  &dev);
+		if (ret)
+			goto error;
+
+		debug("%s: Match found: %s\n", __func__, drv->name);
+
+		w1 = dev_get_parent_platdata(dev);
+		w1->id = id;
+
+		return 0;
+	}
+
+error:
+	debug("%s: No matches found: error %d\n", __func__, ret);
+	return ret;
+}
+
+static int w1_enumerate(struct udevice *bus)
+{
+	const struct w1_ops *ops = device_get_ops(bus);
+	struct w1_bus *w1 = dev_get_uclass_priv(bus);
+	u64 last_rn, rn = w1->search_id, tmp64;
+	bool last_device = false;
+	int search_bit, desc_bit = 64;
+	int last_zero = -1;
+	u8 triplet_ret = 0;
+	int i;
+
+	if (!ops->reset || !ops->write_byte || !ops->triplet)
+		return -ENOSYS;
+
+	while ( !last_device ) {
+		last_rn = rn;
+		rn = 0;
+
+		/*
+		 * Reset bus and all 1-wire device state machines
+		 * so they can respond to our requests.
+		 *
+		 * Return 0 - device(s) present, 1 - no devices present.
+		 */
+		if (ops->reset(bus)) {
+			debug("%s: No devices present on the wire.\n",
+			      __func__);
+			break;
+		}
+
+		/* Start the search */
+		ops->write_byte(bus, W1_SEARCH);
+		for (i = 0; i < 64; ++i) {
+			/* Determine the direction/search bit */
+			if (i == desc_bit)
+				search_bit = 1;	  /* took the 0 path last time, so take the 1 path */
+			else if (i > desc_bit)
+				search_bit = 0;	  /* take the 0 path on the next branch */
+			else
+				search_bit = ((last_rn >> i) & 0x1);
+
+			/* Read two bits and write one bit */
+			triplet_ret = ops->triplet(bus, search_bit);
+
+			/* quit if no device responded */
+			if ( (triplet_ret & 0x03) == 0x03 )
+				break;
+
+			/* If both directions were valid, and we took the 0 path... */
+			if (triplet_ret == 0)
+				last_zero = i;
+
+			/* extract the direction taken & update the device number */
+			tmp64 = (triplet_ret >> 2);
+			rn |= (tmp64 << i);
+		}
+
+		if ( (triplet_ret & 0x03) != 0x03 ) {
+			if ((desc_bit == last_zero) || (last_zero < 0)) {
+				last_device = 1;
+				w1->search_id = 0;
+			} else {
+				w1->search_id = rn;
+			}
+			desc_bit = last_zero;
+
+			w1_new_device(bus, rn);
+		}
+	}
+
+	return 0;
+}
+
+int w1_get_bus(int busnum, struct udevice **busp)
+{
+	int ret;
+
+	ret = uclass_get_device_by_seq(UCLASS_W1, busnum, busp);
+	if (ret) {
+		debug("Cannot find w1 bus %d\n", busnum);
+		return ret;
+	}
+
+	return 0;
+}
+
+u8 w1_get_device_family(struct udevice *dev)
+{
+	struct w1_device *w1 = dev_get_parent_platdata(dev);
+
+	return w1->id & 0xff;
+}
+
+int w1_reset_select(struct udevice *dev)
+{
+	struct w1_device *w1 = dev_get_parent_platdata(dev);
+	struct udevice *bus = dev_get_parent(dev);
+	const struct w1_ops *ops = device_get_ops(bus);
+	int i;
+
+	if (!ops->reset || !ops->write_byte)
+		return -ENOSYS;
+
+	ops->reset(bus);
+
+	ops->write_byte(bus, W1_MATCH_ROM);
+
+	for (i = 0; i < sizeof(w1->id); i++)
+		ops->write_byte(bus, (w1->id >> (i * 8)) & 0xff);
+
+	return 0;
+}
+
+int w1_read_byte(struct udevice *dev)
+{
+	struct udevice *bus = dev_get_parent(dev);
+	const struct w1_ops *ops = device_get_ops(bus);
+
+	if (!ops->read_byte)
+		return -ENOSYS;
+
+	return ops->read_byte(bus);
+}
+
+int w1_read_buf(struct udevice *dev, u8 *buf, unsigned count)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		int ret = w1_read_byte(dev);
+		if (ret < 0)
+			return ret;
+
+		buf[i] = ret & 0xff;
+	}
+
+	return 0;
+}
+
+int w1_write_byte(struct udevice *dev, u8 byte)
+{
+	struct udevice *bus = dev_get_parent(dev);
+	const struct w1_ops *ops = device_get_ops(bus);
+
+	if (!ops->write_byte)
+		return -ENOSYS;
+
+	ops->write_byte(bus, byte);
+
+	return 0;
+}
+
+static int w1_post_probe(struct udevice *bus)
+{
+	w1_enumerate(bus);
+
+	return 0;
+}
+
+UCLASS_DRIVER(w1) = {
+	.name		= "w1",
+	.id		= UCLASS_W1,
+	.flags		= DM_UC_FLAG_SEQ_ALIAS,
+	.per_device_auto_alloc_size	= sizeof(struct w1_bus),
+	.per_child_platdata_auto_alloc_size	= sizeof(struct w1_device),
+	.post_probe	= w1_post_probe,
+};
+
+int w1_init(void)
+{
+	struct udevice *bus;
+	struct uclass *uc;
+	int ret;
+
+	ret = uclass_get(UCLASS_W1, &uc);
+	if (ret)
+		return ret;
+
+	uclass_foreach_dev(bus, uc) {
+		ret = device_probe(bus);
+		if (ret == -ENODEV) {	/* No such device. */
+			printf("W1 controller not available.\n");
+			continue;
+		}
+
+		if (ret) {		/* Other error. */
+			printf("W1 controller probe failed, error %d\n", ret);
+			continue;
+		}
+	}
+
+	return 0;
+}
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index eb78c4dac485..b88adcbe802f 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -82,6 +82,7 @@ enum uclass_id {
 	UCLASS_VIDEO,		/* Video or LCD device */
 	UCLASS_VIDEO_BRIDGE,	/* Video bridge, e.g. DisplayPort to LVDS */
 	UCLASS_VIDEO_CONSOLE,	/* Text console driver for video device */
+	UCLASS_W1,		/* Dallas 1-Wire bus */
 
 	UCLASS_COUNT,
 	UCLASS_INVALID = -1,
diff --git a/include/w1.h b/include/w1.h
new file mode 100644
index 000000000000..d03509bedbff
--- /dev/null
+++ b/include/w1.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2015 Free Electrons
+ * Copyright (c) 2015 NextThing Co
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __W1_H
+#define __W1_H
+
+#include <dm.h>
+
+#define W1_FAMILY_DS2431	0x2d
+
+/**
+ * struct w1_driver_entry - Matches a driver to its w1 family
+ * @driver: Driver to use
+ * @family: W1 family handled by this driver
+ */
+struct w1_driver_entry {
+	struct driver	*driver;
+	u8		family;
+};
+
+#define U_BOOT_W1_DEVICE(__name, __family)				\
+	ll_entry_declare(struct w1_driver_entry, __name, w1_driver_entry) = { \
+		.driver = llsym(struct driver, __name, driver),		\
+		.family = __family,					\
+	}
+
+struct w1_ops {
+	u8	(*read_byte)(struct udevice *dev);
+	bool	(*reset)(struct udevice *dev);
+	u8	(*triplet)(struct udevice *dev, bool bdir);
+	void	(*write_byte)(struct udevice *dev, u8 byte);
+};
+
+int w1_get_bus(int busnum, struct udevice **busp);
+u8 w1_get_device_family(struct udevice *dev);
+
+int w1_read_buf(struct udevice *dev, u8 *buf, unsigned count);
+int w1_read_byte(struct udevice *dev);
+int w1_reset_select(struct udevice *dev);
+int w1_write_buf(struct udevice *dev, u8 *buf, unsigned count);
+int w1_write_byte(struct udevice *dev, u8 byte);
+
+#endif
-- 
git-series 0.8.11


More information about the U-Boot mailing list