[U-Boot] [PATCH][v2] net: fman: fix 2.5G SGMII settings

[Shaohui Xie]

The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in
set_if_mode(), and the serdes PCS configuration are wrong, this patch uses
the correct settings took from Linux.

Signed-off-by: Shaohui Xie <Shaohui.Xie at nxp.com>
---
changes in v2:
1. code style changes for readability.
2. uses leading 0's in values set to PHY registers.

 drivers/net/fm/eth.c   | 33 +++++++++++++++++++++++----------
 drivers/net/fm/memac.c |  1 +
 include/fsl_memac.h    |  1 +
 3 files changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index eb8e936..bf5f89b 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -45,9 +45,12 @@ static void dtsec_configure_serdes(struct fm_eth *priv)
 
 qsgmii_loop:
 	/* SGMII IF mode + AN enable only for 1G SGMII, not for 2.5G */
-	value = PHY_SGMII_IF_MODE_SGMII;
-	if (!sgmii_2500)
-		value |= PHY_SGMII_IF_MODE_AN;
+	if (sgmii_2500)
+		value = PHY_SGMII_CR_PHY_RESET |
+			PHY_SGMII_IF_SPEED_GIGABIT |
+			PHY_SGMII_IF_MODE_SGMII;
+	else
+		value = PHY_SGMII_IF_MODE_SGMII | PHY_SGMII_IF_MODE_AN;
 
 	memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x14, value);
 
@@ -55,15 +58,24 @@ qsgmii_loop:
 	value = PHY_SGMII_DEV_ABILITY_SGMII;
 	memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x4, value);
 
-	/* Adjust link timer for SGMII  -
-	1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */
-	memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x13, 0x3);
-	memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x12, 0xd40);
+	if (sgmii_2500) {
+		/* Adjust link timer for 2.5G SGMII,
+		 * 1.6 ms in units of 3.2 ns:
+		 * 1.6ms / 3.2ns = 5 * 10^5 = 0x7a120.
+		 */
+		memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x13, 0x0007);
+		memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x12, 0xa120);
+	} else {
+		/* Adjust link timer for SGMII,
+		 * 1.6 ms in units of 8 ns:
+		 * 1.6ms / 8ns = 2 * 10^5 = 0x30d40.
+		 */
+		memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x13, 0x0003);
+		memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x12, 0x0d40);
+	}
 
 	/* Restart AN */
-	value = PHY_SGMII_CR_DEF_VAL;
-	if (!sgmii_2500)
-		value |= PHY_SGMII_CR_RESET_AN;
+	value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
 	memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0, value);
 
 	if ((priv->enet_if == PHY_INTERFACE_MODE_QSGMII) && (i < 3)) {
@@ -391,6 +403,7 @@ static int fm_eth_startup(struct fm_eth *fm_eth)
 
 	/* For some reason we need to set SPEED_100 */
 	if (((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) ||
+	     (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII_2500) ||
 	     (fm_eth->enet_if == PHY_INTERFACE_MODE_QSGMII)) &&
 	      mac->set_if_mode)
 		mac->set_if_mode(mac, fm_eth->enet_if, SPEED_100);
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 81a64bf..1b5779c 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -90,6 +90,7 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac,
 		if_mode |= (IF_MODE_GMII | IF_MODE_RM);
 		break;
 	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_SGMII_2500:
 	case PHY_INTERFACE_MODE_QSGMII:
 		if_mode &= ~IF_MODE_MASK;
 		if_mode |= (IF_MODE_GMII);
diff --git a/include/fsl_memac.h b/include/fsl_memac.h
index bed2a40..431c2a0 100644
--- a/include/fsl_memac.h
+++ b/include/fsl_memac.h
@@ -226,6 +226,7 @@ struct memac {
 #define PHY_SGMII_CR_PHY_RESET      0x8000
 #define PHY_SGMII_CR_RESET_AN       0x0200
 #define PHY_SGMII_CR_DEF_VAL        0x1140
+#define PHY_SGMII_IF_SPEED_GIGABIT  0x0008
 #define PHY_SGMII_DEV_ABILITY_SGMII 0x4001
 #define PHY_SGMII_IF_MODE_AN        0x0002
 #define PHY_SGMII_IF_MODE_SGMII     0x0001
-- 
2.1.0.27.g96db324