[U-Boot] [PATCH 1/6] net: dw: Add read_rom_hwaddr net_op hook
Olliver Schinagl
oliver at schinagl.nl
Mon Nov 28 11:38:53 CET 2016
On 27-11-16 18:02, Simon Glass wrote:
> Hi,
>
> On 25 November 2016 at 08:38, Olliver Schinagl <oliver at schinagl.nl> wrote:
>> Add the read_rom_hwaddr net_op hook so that it can be called from boards
>> to read the mac from a ROM chip.
>>
>> Signed-off-by: Olliver Schinagl <oliver at schinagl.nl>
>> ---
>> drivers/net/designware.c | 16 ++++++++++++++++
>> 1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/net/designware.c b/drivers/net/designware.c
>> index 9e6d726..3f2f67c 100644
>> --- a/drivers/net/designware.c
>> +++ b/drivers/net/designware.c
>> @@ -230,6 +230,21 @@ static int _dw_write_hwaddr(struct dw_eth_dev *priv, u8 *mac_id)
>> return 0;
>> }
>>
>> +__weak int dw_board_read_rom_hwaddr(unsigned char *enetaddr, int id)
>> +{
>> + return -ENOSYS;
>> +}
>> +
>> +static int designware_eth_read_rom_hwaddr(struct udevice *dev)
>> +{
>> + struct eth_pdata *pdata = dev_get_platdata(dev);
>> +
>> + if (!dev)
>> + return -ENOSYS;
>> +
>> + return dw_board_read_rom_hwaddr(pdata->enetaddr, dev->seq);
>> +}
>> +
>> static void dw_adjust_link(struct eth_mac_regs *mac_p,
>> struct phy_device *phydev)
>> {
>> @@ -685,6 +700,7 @@ static const struct eth_ops designware_eth_ops = {
>> .free_pkt = designware_eth_free_pkt,
>> .stop = designware_eth_stop,
>> .write_hwaddr = designware_eth_write_hwaddr,
>> + .read_rom_hwaddr = designware_eth_read_rom_hwaddr,
>> };
>>
>> static int designware_eth_ofdata_to_platdata(struct udevice *dev)
> You should not call board code from a driver. But since this is a
> sunxi driver, why not move all the code that reads the serial number
> into this file?
Hey Simon,
unless I missunderstand, this is how Joe suggested in a while ago, and
how it has been implemented in a few other drivers. Can you elaborate a
bit more?
Olliver
>
> Regards,
> Simon
More information about the U-Boot
mailing list