[U-Boot] [PATCH 1/3] net: phy: realtek: Use the BIT() macro
Olliver Schinagl
oliver at schinagl.nl
Tue Nov 8 17:38:57 CET 2016
The BIT macro is the preferred method to set bits.
This patch adds the bit macro and converts bit invocations.
Signed-off-by: Olliver Schinagl <oliver at schinagl.nl>
---
drivers/net/phy/realtek.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 7a99cb0..35b934b 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -9,13 +9,14 @@
*/
#include <config.h>
#include <common.h>
+#include <linux/bitops.h>
#include <phy.h>
#define PHY_AUTONEGOTIATE_TIMEOUT 5000
/* RTL8211x 1000BASE-T Control Register */
-#define MIIM_RTL8211x_CTRL1000T_MSCE (1 << 12);
-#define MIIM_RTL8211X_CTRL1000T_MASTER (1 << 11);
+#define MIIM_RTL8211x_CTRL1000T_MSCE BIT(12);
+#define MIIM_RTL8211X_CTRL1000T_MASTER BIT(11);
/* RTL8211x PHY Status Register */
#define MIIM_RTL8211x_PHY_STATUS 0x11
--
2.10.2
More information about the U-Boot
mailing list