[U-Boot] [PATCH v2] armv8: fsl-layerscape: Add Readme for deploy QSPI image

[york sun]

On 11/07/2016 07:52 PM, Yuan Yao wrote:
> From: Yuan Yao <yao.yuan at nxp.com>
>
> Signed-off-by: Yuan Yao <yao.yuan at nxp.com>
> ---
> Changed in v2:
> 	Move the readme for QSPI deploy out of only for ls2080aqds.
> ---
>  .../arm/cpu/armv8/fsl-layerscape/doc/README.deploy | 44 ++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
>
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
> new file mode 100644
> index 0000000..25813b3
> --- /dev/null
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
> @@ -0,0 +1,44 @@
> +Boot source support Overview
> +-------------------
> +	1. LS1043A
> +		LS1043AQDS:QSPI, SD, NOR, NAND
> +		LS1043ARDB:SD, NOR, NAND
> +	2. LS2080A
> +		LS2080AQDS:QSPI, SD, NOR, NAND
> +		LS2080ARDB:NOR, NAND
> +	3. LS1012A
> +		LS1012AQDS:QSPI
> +		LS1012ARDB:QSPI
> +	4. LS1046A
> +		LS1046AQDS:QSPI, SD, NOR, NAND
> +		LS1046ARDB:QSPI, SD
> +

If you plan to add all SD/NAND/QSPI into this document, it is OK to call 
it README.deploy. Otherwise it may be better to name as README.qspi.

York