[U-Boot] [PATCH 0/4] sunxi: Improve the SinA33 support

[Maxime Ripard]

Hi all,

The SinA33 board is based on an Allwinner A33 SoC and features an external
(and optional) LCD display and a 4GB Toshida eMMC.

This eMMC wasn't recognized by default in U-boot because it was failing to
switch in high speed mode at the first attempt.

The first three patches are to enable the eMMC, the last one to enable the
LCD.

Let me know what you think,
Maxime

Maxime Ripard (4):
  mmc: Retry the switch command
  mmc: sunxi: Enable 8bits bus width for sun8i
  sunxi: sina33: Enable the eMMC
  sunxi: sina33: Enable the LCD

 configs/Sinlinx_SinA33_defconfig |  5 +++++
 drivers/mmc/mmc.c                | 15 +++++++++++----
 drivers/mmc/sunxi_mmc.c          |  2 +-
 3 files changed, 17 insertions(+), 5 deletions(-)

base-commit: d8bdfc80da39211d95f10d24e79f2e867305f71b
-- 
git-series 0.8.11