[U-Boot] [PATCH 7/7] sunxi: Add support for the CHIP Pro

[Hans de Goede]

Hi,

On 08-11-16 17:21, Maxime Ripard wrote:
> The CHIP Pro is a SoM that features the GR8 SIP, an AXP209, a BT/WiFi chip
> and a 512MiB SLC NAND.
>
> This it's an SLC NAND, it doesn't suffer the same drawbacks than found on
> the MLC NANDs, and we can enable it right away.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>

Patch 3/3 needs a v3 before this can be merged, otherwise this
looks good to me:

Reviewed-by: Hans de Goede <hdegoede at redhat.com>

Regards,

Hans

> ---
>  configs/CHIP_pro_defconfig | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+), 0 deletions(-)
>  create mode 100644 configs/CHIP_pro_defconfig
>
> diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig
> new file mode 100644
> index 000000000000..6008f44f485c
> --- /dev/null
> +++ b/configs/CHIP_pro_defconfig
> @@ -0,0 +1,27 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_SPL_I2C_SUPPORT=y
> +# CONFIG_SPL_MMC_SUPPORT is not set
> +CONFIG_MACH_SUN5I=y
> +CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
> +# CONFIG_MMC is not set
> +CONFIG_USB0_VBUS_PIN="PB10"
> +CONFIG_DEFAULT_DEVICE_TREE="ntc-gr8-chip-pro"
> +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,SYS_NAND_BLOCK_SIZE=0x40000,SYS_NAND_PAGE_SIZE=4096,SYS_NAND_OOBSIZE=256,ENV_IS_IN_NAND"
> +CONFIG_SPL=y
> +# CONFIG_CMD_IMLS is not set
> +CONFIG_CMD_DFU=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +CONFIG_DFU_RAM=y
> +CONFIG_AXP_ALDO3_VOLT=3300
> +CONFIG_AXP_ALDO4_VOLT=3300
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_MUSB_GADGET=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
> +CONFIG_G_DNL_VENDOR_NUM=0x1f3a
> +CONFIG_G_DNL_PRODUCT_NUM=0x1010
> +CONFIG_NAND_SUNXI=y
> +CONFIG_SPL_NAND_SUPPORT=y
> +CONFIG_MTD_UBI=y
>