[U-Boot] Pull request: u-boot-spi/sunxi

[Jagan Teki]

On Thu, Nov 24, 2016 at 9:30 PM, Hans de Goede <hdegoede at redhat.com> wrote:
> Hi,
>
>
> On 24-11-16 15:55, Maxime Ripard wrote:
>>
>> On Thu, Nov 24, 2016 at 08:05:55PM +0530, Jagan Teki wrote:
>>>
>>> Hi Tom,
>>>
>>> These are the pending patches, from u-boot-sunxi/next.
>>>
>>> Will send sunxi PR on top of u-boot-sunxi repo once I get the access,
>>> meanwhile please take this PR.
>>>
>>> Hans, Let me know if I miss any patches from next.
>>>
>>> thanks!
>>> Jagan.
>>>
>>> The following changes since commit
>>> fc127d184aea293ec415dd66e3282dba0b66c5f3:
>>>
>>>   colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space
>>> reason (2016-11-23 13:53:20 +0100)
>>>
>>> are available in the git repository at:
>>>
>>>   git://git.denx.de/u-boot-spi.git sunxi
>>>
>>> for you to fetch changes up to e68a831cacc85ea1da274f3c8d19bb98c1141a97:
>>>
>>>   nand: sunxi: Add options for the SPL NAND configuration (2016-11-24
>>> 19:40:49 +0530)
>>>
>>> ----------------------------------------------------------------
>>> Boris Brezillon (1):
>>>       mtd: nand: add support for the TC58NVG2S0H chip
>>>
>>> Chen-Yu Tsai (9):
>>>       ARM: PSCI: Set ARMV7_PSCI_NR_CPUS default to 8 for sun9i/A80
>>>       sunxi: Add CCI-400 and CPUCFG registers base address for sun9i/A80
>>>       sunxi: Add base address of secure SRAM B for sun9i/A80
>>>       sunxi: Use secure SRAM B for secure RAM for sun9i/A80
>>>       sunxi: Add PRCM register definition for sun9i/A80
>>>       sunxi: Add CPUCFG register definitions for sun9i/A80
>>>       sunxi: Add support for TZPC on sun9i/A80
>>>       sunxi: Add basic PSCI implementation for A80
>>>       sunxi: Enable PSCI on sun9i/A80
>>>
>>> Emmanuel Vadot (1):
>>>       sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE
>>>
>>> Hans de Goede (1):
>>>       sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
>>>
>>> Jelle van der Waa (1):
>>>       sunxi: Use the available Kconfig option for AHCI
>>>
>>> Marcel Ziswiler (1):
>>>       colibri_pxa270: transition to driver model for serial
>>>
>>> Maxime Ripard (3):
>>>       sunxi: Sync GR8 DTS and AXP209 with the kernel
>>>       tools: sunxi: Add spl image builder
>>>       nand: sunxi: Add options for the SPL NAND configuration
>>
>>
>> Hmmm, I'm not sure why it's in though.
>>
>> I sent an update version of those since the first iteration had
>> issues.
>
>
> Probably my bad, I put this in u-boot-sunxi/next before I stepped
> down as maintainer. Which of these 3 patches need to be dropped
> exactly?
>
> Otherwise this pull-req looks good. Jagan, thank you for your
> work on this!

OK, couldn't see Maxime latest series. Will remove these 3 and send the PR.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.