[U-Boot] [PATCH] configs: am43x: hs: Modify SPL load address to fix UART boot issue

[Lokesh Vutla]

From: Madan Srinivas <madans at ti.com>

An issue in the TI secure image generation tool causes the ROM to
load the SPL at a different load address than what is specified by
CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot.

This causes the SPL to fail on secure devices during peripheral
boot.

The TI secure image generation tool has been fixed so that the SPL
will always be loaded at 0x403018E0 by the ROM code for both
peripheral and memory boot modes. am43x hs defconfig file have been
updated to reflect this change.

Signed-off-by: Madan Srinivas <madans at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 configs/am43xx_hs_evm_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig
index 1c53877..7d791fe 100644
--- a/configs/am43xx_hs_evm_defconfig
+++ b/configs/am43xx_hs_evm_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_AM43XX=y
 CONFIG_TI_SECURE_DEVICE=y
 CONFIG_TARGET_AM43XX_EVM=y
-CONFIG_ISW_ENTRY_ADDR=0x40302ae0
+CONFIG_ISW_ENTRY_ADDR=0x403018e0
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"
-- 
2.10.1