[U-Boot] [PATCH v2 00/63] x86: Add initial support for 64-bit U-Boot
Simon Glass
sjg at chromium.org
Sat Nov 19 21:24:49 CET 2016
At present U-Boot runs entirely in 32-bit mode on x86, except for the
initial switch from 16-bit mode. On 64-bit machines it is possible to run
in 64-bit mode. This series starts the process of adding this support.
The main benefit of 64-bit mode for a boot loader is direct access to all
available memory. There are also more registers, but this makes very little
difference.
This feature is implemented by putting all of the 32-bit code in an SPL
build. SPL then runs through all the init that has to be done in 32-bit
mode, changes to 64-bit mode and then jumps to U-Boot proper.
Typically the total code size increases slightly. For example, on link in
32-bit mode, U-Boot has around 480KB of code (admittedly with a large
number of features enabled). In 64-bit mode, U-Boot falls to around 460KB,
but SPL adds another 60KB, for a net increase of 40KB. Partly this is due
to code duplication and partly it is due to the worse code density of
64-bit code on x86.
Many major features are not implemented yet, for example:
- SDRAM sizing
- Booting linux
- FSP support
- EFI support
- SCSI device init
- Running video ROMs
Still, this is a big step forward towards full 64-bit support. To enable it,
select CONFIG_X86_RUN_64BIT.
This series is available at u-boot-x86/64-working
Changes in v2:
- Show the error value in spl_spi_load_image()
- Move table-related changes from a later patch
- Rebase to mainline
- Drop the write_smbios_table_wrapper() function
- Drop change to gma.c
- Output error code values in debug() statements
- Fix cast in bd82x6x_video_probe() also
- Fix cast in get_guid_hob_data() also
- Move table-related changes to an earlier patch
- Add the 'val' parameter to longjmp()
- Drop patch 'video: Use ulong for video frame buffer address'
- Add a new 64-bit link config instead of changing the existing one
Simon Glass (63):
console: Don't enable CONFIG-CONSOLE_MUX, etc. in SPL
spl: spi: Add a debug message if loading fails
spl: Makefile: Define SPL_ earlier
spl: Allow CPU drivers to be used in SPL
spl: Allow PCI drivers to be used in SPL
spl: Allow RTC drivers to be used in SPL
spl: Allow timer drivers to be used in SPL
spl: Allow PCH drivers to be used in SPL
spl: Don't create a BSS padding when it is separate
x86: Use unsigned long for address in table generation
WIP: x86: Update mpspec to build on 64-bit machines
x86: Add basic support for U-Boot as a 64-bit EFI application
x86: ivybridge: Declare global data where it is used
x86: ivybridge: Add more debugging for failures
x86: ivybridge: Fix types for 64-bit compilation
x86: dts: Mark serial as needed before relocation
x86: fsp: Fix cast for 64-bit compilation
x86: lib: Fix types and casts for 64-bit compilation
x86: Add Kconfig options to build 64-bit U-Boot
x86: Kconfig: Add location options for 16/32-bit init
x86: Use X86_16BIT_INIT instead of X86_RESET_VECTOR
x86: Use X86_32BIT_INIT instead of X86_RESET_VECTOR
x86: ivybridge: Allow 32-bit init to move to SPL
x86: Add 64-bit start-up code
x86: board_f: Update init sequence for 64-bit startup
x86: board_r: Set the global data pointer after relocation
x86: Do relocation before clearing BSS
x86: Refactor relocation to prepare for 64-bit
x86: Add support for 64-bit relocation
x86: Tidy up use of size_t in relocation
x86: Add an SPL implementation
x86: Move the i386 code into its own directory
x86: Add cpu code for x86_64
x86: Support global_data on x86_64
x86: Fix up CONFIG_X86_64 check
x86: Add a link script for 64-bit x86
x86: Add a link script for SPL
x86: Add SPL build rules for start-up code
x86: Fix up byteorder.h for x86_64
x86: Drop flag_is_changable() on x86_64
x86: Fix up type sizes for 64-bit
x86: Mention the MRC region in the README
x86: ivybridge: Skipt SATA init in SPL
x86: ivybridge: Provide a dummy SDRAM init for 64-bit
x86: Don't try to run the VGA BIOS in 64-bit mode
x86: Don't build call64 and setjmp on 64-bit
x86: Don't build cpu files which are not supported on 64-bit
x86: Don't build 32-bit efi files on x86_64
x86: Don't try to boot Linux from SPL
x86: Drop interrupt support in 64-bit mode
x86: Support jumping from SPL to U-Boot
x86: Move pirq_routing_table to global_data
x86: Move turbo_state to global_data
x86: Change irq_already_routed to a local variable
x86: Move call64 to the i386 directory
x86: Move setjmp to the i386 directory
x86: Add a dummy setjmp implementation for x86_64
x86: link: Add a text base for 64-bit U-Boot
x86: link: Add SPL declarations to the binman image
x86: link: Set up device tree for SPL
x86: link: Add build options for SPL
x86: Update compile/link flags to support 64-bit U-Boot
x86: link: Add a config for 64-bit U-Boot
Makefile | 7 +-
arch/x86/Kconfig | 85 ++++
arch/x86/Makefile | 9 +-
arch/x86/config.mk | 30 +-
arch/x86/cpu/Makefile | 24 +-
arch/x86/cpu/config.mk | 8 +-
arch/x86/cpu/cpu.c | 504 --------------------
arch/x86/cpu/i386/Makefile | 9 +
arch/x86/cpu/{ => i386}/call64.S | 3 +
arch/x86/cpu/i386/cpu.c | 599 ++++++++++++++++++++++++
arch/x86/cpu/{interrupts.c => i386/interrupt.c} | 6 +-
arch/x86/cpu/{ => i386}/setjmp.S | 0
arch/x86/cpu/intel_common/Makefile | 10 +-
arch/x86/cpu/irq.c | 14 +-
arch/x86/cpu/ivybridge/Makefile | 9 +-
arch/x86/cpu/ivybridge/bd82x6x.c | 2 +
arch/x86/cpu/ivybridge/cpu.c | 4 +-
arch/x86/cpu/ivybridge/lpc.c | 2 +
arch/x86/cpu/ivybridge/model_206ax.c | 2 +
arch/x86/cpu/ivybridge/northbridge.c | 2 +
arch/x86/cpu/ivybridge/sata.c | 4 +-
arch/x86/cpu/ivybridge/sdram.c | 37 +-
arch/x86/cpu/ivybridge/sdram_nop.c | 29 ++
arch/x86/cpu/start64.S | 39 ++
arch/x86/cpu/turbo.c | 8 +-
arch/x86/cpu/u-boot-64.lds | 76 +++
arch/x86/cpu/u-boot-spl.lds | 74 +++
arch/x86/cpu/u-boot.lds | 2 +-
arch/x86/cpu/x86_64/Makefile | 6 +
arch/x86/cpu/x86_64/cpu.c | 48 ++
arch/x86/cpu/x86_64/interrupts.c | 30 ++
arch/x86/cpu/x86_64/setjmp.c | 20 +
arch/x86/dts/chromebook_link.dts | 15 +-
arch/x86/dts/serial.dtsi | 1 +
arch/x86/dts/u-boot.dtsi | 19 +
arch/x86/include/asm/acpi_table.h | 2 +-
arch/x86/include/asm/byteorder.h | 17 +-
arch/x86/include/asm/cpu.h | 12 +
arch/x86/include/asm/fsp/fsp_hob.h | 4 +-
arch/x86/include/asm/global_data.h | 8 +-
arch/x86/include/asm/mp.h | 3 +
arch/x86/include/asm/mpspec.h | 10 +-
arch/x86/include/asm/posix_types.h | 5 +
arch/x86/include/asm/sfi.h | 2 +-
arch/x86/include/asm/spl.h | 8 +
arch/x86/include/asm/tables.h | 2 +-
arch/x86/include/asm/types.h | 5 +
arch/x86/lib/Makefile | 11 +
arch/x86/lib/acpi_table.c | 4 +-
arch/x86/lib/bios.c | 4 +-
arch/x86/lib/bootm.c | 2 +
arch/x86/lib/elf_x86_64_efi.lds | 3 +
arch/x86/lib/init_helpers.c | 2 +-
arch/x86/lib/interrupts.c | 5 +
arch/x86/lib/mpspec.c | 14 +-
arch/x86/lib/pinctrl_ich6.c | 2 +-
arch/x86/lib/pirq_routing.c | 14 +-
arch/x86/lib/reloc_x86_64.c | 90 ++++
arch/x86/lib/relocate.c | 102 +++-
arch/x86/lib/sfi.c | 6 +-
arch/x86/lib/spl.c | 149 ++++++
arch/x86/lib/tables.c | 11 +-
arch/x86/lib/zimage.c | 2 +-
board/google/Kconfig | 7 +
board/google/chromebook_link/Kconfig | 5 +-
board/google/chromebook_link/MAINTAINERS | 7 +
common/board_f.c | 14 +-
common/board_r.c | 5 +
common/console.c | 30 +-
common/spl/Kconfig | 47 ++
common/spl/spl_spi.c | 5 +-
configs/chromebook_link64_defconfig | 94 ++++
configs/chromebook_link_defconfig | 23 +-
doc/README.x86 | 1 +
drivers/Makefile | 5 +
drivers/misc/qfw.c | 4 +-
drivers/pci/pci_rom.c | 2 +-
drivers/video/ivybridge_igd.c | 6 +-
include/configs/chromebook_link.h | 9 +
include/smbios.h | 4 +-
lib/smbios.c | 22 +-
scripts/Makefile.spl | 18 +-
82 files changed, 1871 insertions(+), 673 deletions(-)
create mode 100644 arch/x86/cpu/i386/Makefile
rename arch/x86/cpu/{ => i386}/call64.S (98%)
create mode 100644 arch/x86/cpu/i386/cpu.c
rename arch/x86/cpu/{interrupts.c => i386/interrupt.c} (99%)
rename arch/x86/cpu/{ => i386}/setjmp.S (100%)
create mode 100644 arch/x86/cpu/ivybridge/sdram_nop.c
create mode 100644 arch/x86/cpu/start64.S
create mode 100644 arch/x86/cpu/u-boot-64.lds
create mode 100644 arch/x86/cpu/u-boot-spl.lds
create mode 100644 arch/x86/cpu/x86_64/Makefile
create mode 100644 arch/x86/cpu/x86_64/cpu.c
create mode 100644 arch/x86/cpu/x86_64/interrupts.c
create mode 100644 arch/x86/cpu/x86_64/setjmp.c
create mode 100644 arch/x86/include/asm/spl.h
create mode 100644 arch/x86/lib/reloc_x86_64.c
create mode 100644 arch/x86/lib/spl.c
create mode 100644 configs/chromebook_link64_defconfig
--
2.8.0.rc3.226.g39d4020
More information about the U-Boot
mailing list