[U-Boot] [PATCH v2 1/1] cmd: pci: add option to parse and display BAR information

[yehuday at marvell.com]

From: Yehuda Yitschak <yehuday at marvell.com>

Currently the PCI command only allows to see the BAR register
values but not the size and actual base address.
This little extension parses the BAR registers and displays
the base, size and type of each BAR.

Signed-off-by: Yehuda Yitschak <yehuday at marvell.com>
---
 cmd/pci.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/cmd/pci.c b/cmd/pci.c
index 2f4978a..51eb536 100644
--- a/cmd/pci.c
+++ b/cmd/pci.c
@@ -92,6 +92,96 @@ static void pci_show_regs(pci_dev_t dev, struct pci_reg_info *regs)
 }
 #endif
 
+#ifdef CONFIG_DM_PCI
+int pci_bar_show(struct udevice *dev)
+#else
+int pci_bar_show(pci_dev_t dev)
+#endif
+{
+	u8 header_type;
+	int bar_cnt, bar_id, is_64, is_io, mem_type;
+	u32 base_low, base_high;
+	u32 size_low, size_high;
+	u64 base, size;
+	u32 reg_addr;
+	int prefetchable;
+
+#ifdef CONFIG_DM_PCI
+	dm_pci_read_config8(dev, PCI_HEADER_TYPE, &header_type);
+#else
+	pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+#endif
+
+	if (header_type == PCI_HEADER_TYPE_CARDBUS) {
+		printf("CardBus doesn't support BARs\n");
+		return -1;
+	}
+
+	bar_cnt = (header_type == PCI_HEADER_TYPE_NORMAL) ? 6 : 2;
+
+	printf("ID   Base                Size                Width  Type\n");
+	printf("----------------------------------------------------------\n");
+
+	bar_id = 0;
+	reg_addr = PCI_BASE_ADDRESS_0;
+	while (bar_cnt) {
+#ifdef CONFIG_DM_PCI
+		dm_pci_read_config32(dev, reg_addr, &base_low);
+		dm_pci_write_config32(dev, reg_addr, 0xFFFFFFFF);
+		dm_pci_read_config32(dev, reg_addr, &size_low);
+		dm_pci_write_config32(dev, reg_addr, base_low);
+#else
+		pci_read_config_dword(dev, reg_addr, &base_low);
+		pci_write_config_dword(dev, reg_addr, 0xFFFFFFFF);
+		pci_read_config_dword(dev, reg_addr, &size_low);
+		pci_write_config_dword(dev, reg_addr, base_low);
+#endif
+		reg_addr += 4;
+
+		base = base_low & ~0xF;
+		size = size_low & ~0xF;
+		base_high = 0x0;
+		size_high = 0xFFFFFFFF;
+		is_64 = 0;
+		prefetchable = base_low & PCI_BASE_ADDRESS_MEM_PREFETCH;
+		is_io = base_low & PCI_BASE_ADDRESS_SPACE_IO;
+		mem_type = base_low & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
+
+		if (mem_type == PCI_BASE_ADDRESS_MEM_TYPE_64) {
+#ifdef CONFIG_DM_PCI
+			dm_pci_read_config32(dev, reg_addr, &base_high);
+			dm_pci_write_config32(dev, reg_addr, 0xFFFFFFFF);
+			dm_pci_read_config32(dev, reg_addr, &size_high);
+			dm_pci_write_config32(dev, reg_addr, base_high);
+#else
+			pci_read_config_dword(dev, reg_addr, &base_high);
+			pci_write_config_dword(dev, reg_addr, 0xFFFFFFFF);
+			pci_read_config_dword(dev, reg_addr, &size_high);
+			pci_write_config_dword(dev, reg_addr, base_high);
+#endif
+			bar_cnt--;
+			reg_addr += 4;
+			is_64 = 1;
+		}
+
+		base = base | ((u64)base_high << 32);
+		size = size | ((u64)size_high << 32);
+
+		if ((!is_64 && size_low) || (is_64 && size)) {
+			size = ~size + 1;
+			printf(" %d   0x%016llx  0x%016llx  %d     %s   %s\n",
+			       bar_id, base, size, is_64 ? 64 : 32,
+			       is_io ? "I/O" : "MEM",
+			       prefetchable ? "Prefetchable" : "");
+		}
+
+		bar_id++;
+		bar_cnt--;
+	}
+
+	return 0;
+}
+
 static struct pci_reg_info regs_start[] = {
 	{ "vendor ID", PCI_SIZE_16, PCI_VENDOR_ID },
 	{ "device ID", PCI_SIZE_16, PCI_DEVICE_ID },
@@ -573,6 +663,7 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		if (argc > 4)
 			value = simple_strtoul(argv[4], NULL, 16);
 	case 'h':		/* header */
+	case 'b':		/* bars */
 		if (argc < 3)
 			goto usage;
 		if ((bdf = get_pci_dev(argv[2])) == -1)
@@ -641,6 +732,8 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		ret = pci_cfg_write(dev, addr, size, value);
 #endif
 		break;
+	case 'b':		/* bars */
+		return pci_bar_show(dev);
 	default:
 		ret = CMD_RET_USAGE;
 		break;
@@ -663,6 +756,8 @@ static char pci_help_text[] =
 #endif
 	"pci header b.d.f\n"
 	"    - show header of PCI device 'bus.device.function'\n"
+	"pci bar b.d.f\n"
+	"    - show BARs base and size for device b.d.f'\n"
 	"pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
 	"    - display PCI configuration space (CFG)\n"
 	"pci next[.b, .w, .l] b.d.f address\n"
-- 
1.9.1