[U-Boot] [PATCH v5 00/13] binman: A tool for creating firmware images
Simon Glass
sjg at chromium.org
Thu Nov 17 02:13:22 CET 2016
This series introduces binman, a tool designed to create firmware images.
It provides a way to bring together various binaries and place them in an
image, at particular positions and with configurable alignment.
Packaging of firmware is quite a different task from building the various
parts. In many cases the various binaries which go into the image come from
separate build systems. For example, ARM Trusted Firmware is used on ARMv8
devices but is not built in the U-Boot tree. If a Linux kernel is included
in the firmware image, it is built elsewhere.
It is of course possible to add more and more build rules to the U-Boot
build system to cover these cases. It can shell out to other Makefiles and
build scripts. But it seems better to create a clear divide between building
software and packaging it.
U-Boot supports a very large number of boards. Many of these have their own
specific rules for how an image should be put together so that it boots
correctly. At present these rules are described by manual instructions,
different for each board. By turning these instructions into a standard
format, we can support making valid images for any board without manual
effort, lots of READMEs, etc.
Images consist of a number of entries which are combined to make up the
final image. The image is described in the device tree for the board, meaning
that it can be accessed at run-time if desired.
Binman is an extensible tool. A set of standard entries is provides, but
new entries can be created fairly easily. Entries can be as simple as
providing the name of a file to include. They can also handle more complex
requirements, such as adjusting the input file or reading header information
from one entry to control the position of another.
U-Boot's mkimage builds FIT images and various other binaries. Binman
augments this by allowing these binaries to be packed together. While FIT
should be used where possible, it cannot be used everywhere. For example,
many devices require executable code at a particular offset in the image.
X86 machines require lots of binary blobs at particular places, and a
microcode collection easily accessible at boot.
So far binman has enough functionality to be useful, so sunxi and x86 boards
are switched over to use it, as examples.
The series is available at u-boot-dm/binman-working
Future work and missing features are documented in the README.
Changes in v5:
- Add a Makefile 'warning' line for debugging
- Add a dependency on u-boot.dtb for buildman
- Add a new for optional microcode
- Add a new patch to drop microcode features from ifdtool
- Add a new tegra patch to use an automatically included .dtsi file
- Add documentation for the 'optional-ucode' property
- Add documentation for this feature
- Add instructions on how to generate html code coverage
- Add missing 'descriptor.bin' file
- Allow microcode to be optional
- Allow the compiled device tree to be returned from _DoReadFileDtb()
- Change the Makefile variable from binman_... to u_boot_...
- Print 'binman' before all errors
- Put the code to calculate dtb total length in a function
- Remove commented-out PYTHONPATH code which is not needed now
Changes in v4:
- Add an option to bring in an soc .dtsi file also
- Add new patch to support building x86 images with FSP/CMC
- Fix incorrect comments at the top of intel_*.py
- Remove RFC tag
- Use binman for all sunxi boards
- Use binman for all x86 boards
Changes in v3:
- Add a new patch to automatically include a U-Boot .dtsi file
- Put the binman definition in u-boot.dtsi
- Use a <dts>-u-boot.dtsi file for the binman changes
Changes in v2:
- Add automated test coverage
- Add test for code coverage
- Fix the -b option
- Put the binman definition in a common file for x86
- Various changes and improvements based on using this tool for a while
- drop the unused __len__() method
Simon Glass (13):
binman: Introduce binman, a tool for building binary images
binman: Add basic entry types for U-Boot
binman: Add support for building x86 ROMs
binman: Add support for u-boot.img as an input binary
binman: Add support for building x86 ROMs with SPL
binman: Add support for building x86 images with FSP/CMC
binman: Add a build rule for binman
binman: Allow configuration options to be used in .dts files
binman: Automatically include a U-Boot .dtsi file
tegra: Use a U-Boot-specific .dtsi file
sunxi: Use binman for sunxi boards
x86: Use binman all x86 boards
binman: Drop microcode features from ifdtool
Makefile | 57 +-
arch/arm/dts/sunxi-u-boot.dtsi | 14 +
arch/arm/dts/tegra124-nyan-big-u-boot.dtsi | 15 +
arch/arm/dts/tegra124-nyan-big.dts | 2 -
arch/arm/dts/tegra20-u-boot.dtsi | 11 +
arch/arm/dts/tegra20.dtsi | 2 -
arch/x86/dts/emulation-u-boot.dtsi | 18 +
arch/x86/dts/u-boot.dtsi | 62 ++
scripts/Makefile.lib | 25 +-
tools/binman/.gitignore | 1 +
tools/binman/README | 541 ++++++++++++++
tools/binman/binman | 1 +
tools/binman/binman.py | 114 +++
tools/binman/cmdline.py | 53 ++
tools/binman/control.py | 118 +++
tools/binman/entry_test.py | 27 +
tools/binman/etype/_testing.py | 26 +
tools/binman/etype/blob.py | 37 +
tools/binman/etype/entry.py | 190 +++++
tools/binman/etype/intel_cmc.py | 17 +
tools/binman/etype/intel_descriptor.py | 55 ++
tools/binman/etype/intel_fsp.py | 17 +
tools/binman/etype/intel_me.py | 17 +
tools/binman/etype/intel_mrc.py | 17 +
tools/binman/etype/intel_vga.py | 17 +
tools/binman/etype/u_boot.py | 17 +
tools/binman/etype/u_boot_dtb.py | 17 +
tools/binman/etype/u_boot_dtb_with_ucode.py | 76 ++
tools/binman/etype/u_boot_img.py | 17 +
tools/binman/etype/u_boot_nodtb.py | 17 +
tools/binman/etype/u_boot_spl.py | 17 +
tools/binman/etype/u_boot_spl_bss_pad.py | 26 +
tools/binman/etype/u_boot_spl_with_ucode_ptr.py | 28 +
tools/binman/etype/u_boot_ucode.py | 84 +++
tools/binman/etype/u_boot_with_ucode_ptr.py | 87 +++
tools/binman/etype/x86_start16.py | 17 +
tools/binman/etype/x86_start16_spl.py | 17 +
tools/binman/fdt_test.py | 48 ++
tools/binman/func_test.py | 822 +++++++++++++++++++++
tools/binman/image.py | 229 ++++++
tools/binman/test/01_invalid.dts | 5 +
tools/binman/test/02_missing_node.dts | 6 +
tools/binman/test/03_empty.dts | 9 +
tools/binman/test/04_invalid_entry.dts | 11 +
tools/binman/test/05_simple.dts | 11 +
tools/binman/test/06_dual_image.dts | 22 +
tools/binman/test/07_bad_align.dts | 12 +
tools/binman/test/08_pack.dts | 30 +
tools/binman/test/09_pack_extra.dts | 35 +
tools/binman/test/10_pack_align_power2.dts | 12 +
tools/binman/test/11_pack_align_size_power2.dts | 12 +
tools/binman/test/12_pack_inv_align.dts | 13 +
tools/binman/test/13_pack_inv_size_align.dts | 13 +
tools/binman/test/14_pack_overlap.dts | 16 +
tools/binman/test/15_pack_overflow.dts | 12 +
tools/binman/test/16_pack_image_overflow.dts | 13 +
tools/binman/test/17_pack_image_size.dts | 13 +
tools/binman/test/18_pack_image_align.dts | 13 +
tools/binman/test/19_pack_inv_image_align.dts | 14 +
.../binman/test/20_pack_inv_image_align_power2.dts | 13 +
tools/binman/test/21_image_pad.dts | 16 +
tools/binman/test/22_image_name.dts | 21 +
tools/binman/test/23_blob.dts | 12 +
tools/binman/test/24_sorted.dts | 17 +
tools/binman/test/25_pack_zero_size.dts | 15 +
tools/binman/test/26_pack_u_boot_dtb.dts | 14 +
tools/binman/test/27_pack_4gb_no_size.dts | 18 +
tools/binman/test/28_pack_4gb_outside.dts | 19 +
tools/binman/test/29_x86-rom.dts | 19 +
tools/binman/test/30_x86-rom-me-no-desc.dts | 15 +
tools/binman/test/31_x86-rom-me.dts | 18 +
tools/binman/test/32_intel-vga.dts | 13 +
tools/binman/test/33_x86-start16.dts | 13 +
tools/binman/test/34_x86_ucode.dts | 29 +
tools/binman/test/35_x86_single_ucode.dts | 26 +
tools/binman/test/36_u_boot_img.dts | 11 +
tools/binman/test/37_x86_no_ucode.dts | 20 +
tools/binman/test/38_x86_ucode_missing_node.dts | 26 +
tools/binman/test/39_x86_ucode_missing_node2.dts | 23 +
tools/binman/test/40_x86_ucode_not_in_image.dts | 28 +
tools/binman/test/41_unknown_pos_size.dts | 11 +
tools/binman/test/42_intel-fsp.dts | 13 +
tools/binman/test/43_intel-cmc.dts | 13 +
tools/binman/test/44_x86_optional_ucode.dts | 30 +
tools/binman/test/descriptor.bin | Bin 0 -> 4096 bytes
tools/binman/test/u_boot_no_ucode_ptr | Bin 0 -> 4182 bytes
tools/binman/test/u_boot_no_ucode_ptr.c | 15 +
tools/binman/test/u_boot_ucode_ptr | Bin 0 -> 4175 bytes
tools/binman/test/u_boot_ucode_ptr.c | 15 +
tools/binman/test/u_boot_ucode_ptr.lds | 18 +
tools/ifdtool.c | 254 +------
91 files changed, 3700 insertions(+), 300 deletions(-)
create mode 100644 arch/arm/dts/sunxi-u-boot.dtsi
create mode 100644 arch/arm/dts/tegra124-nyan-big-u-boot.dtsi
create mode 100644 arch/arm/dts/tegra20-u-boot.dtsi
create mode 100644 arch/x86/dts/emulation-u-boot.dtsi
create mode 100644 arch/x86/dts/u-boot.dtsi
create mode 100644 tools/binman/.gitignore
create mode 100644 tools/binman/README
create mode 120000 tools/binman/binman
create mode 100755 tools/binman/binman.py
create mode 100644 tools/binman/cmdline.py
create mode 100644 tools/binman/control.py
create mode 100644 tools/binman/entry_test.py
create mode 100644 tools/binman/etype/_testing.py
create mode 100644 tools/binman/etype/blob.py
create mode 100644 tools/binman/etype/entry.py
create mode 100644 tools/binman/etype/intel_cmc.py
create mode 100644 tools/binman/etype/intel_descriptor.py
create mode 100644 tools/binman/etype/intel_fsp.py
create mode 100644 tools/binman/etype/intel_me.py
create mode 100644 tools/binman/etype/intel_mrc.py
create mode 100644 tools/binman/etype/intel_vga.py
create mode 100644 tools/binman/etype/u_boot.py
create mode 100644 tools/binman/etype/u_boot_dtb.py
create mode 100644 tools/binman/etype/u_boot_dtb_with_ucode.py
create mode 100644 tools/binman/etype/u_boot_img.py
create mode 100644 tools/binman/etype/u_boot_nodtb.py
create mode 100644 tools/binman/etype/u_boot_spl.py
create mode 100644 tools/binman/etype/u_boot_spl_bss_pad.py
create mode 100644 tools/binman/etype/u_boot_spl_with_ucode_ptr.py
create mode 100644 tools/binman/etype/u_boot_ucode.py
create mode 100644 tools/binman/etype/u_boot_with_ucode_ptr.py
create mode 100644 tools/binman/etype/x86_start16.py
create mode 100644 tools/binman/etype/x86_start16_spl.py
create mode 100644 tools/binman/fdt_test.py
create mode 100644 tools/binman/func_test.py
create mode 100644 tools/binman/image.py
create mode 100644 tools/binman/test/01_invalid.dts
create mode 100644 tools/binman/test/02_missing_node.dts
create mode 100644 tools/binman/test/03_empty.dts
create mode 100644 tools/binman/test/04_invalid_entry.dts
create mode 100644 tools/binman/test/05_simple.dts
create mode 100644 tools/binman/test/06_dual_image.dts
create mode 100644 tools/binman/test/07_bad_align.dts
create mode 100644 tools/binman/test/08_pack.dts
create mode 100644 tools/binman/test/09_pack_extra.dts
create mode 100644 tools/binman/test/10_pack_align_power2.dts
create mode 100644 tools/binman/test/11_pack_align_size_power2.dts
create mode 100644 tools/binman/test/12_pack_inv_align.dts
create mode 100644 tools/binman/test/13_pack_inv_size_align.dts
create mode 100644 tools/binman/test/14_pack_overlap.dts
create mode 100644 tools/binman/test/15_pack_overflow.dts
create mode 100644 tools/binman/test/16_pack_image_overflow.dts
create mode 100644 tools/binman/test/17_pack_image_size.dts
create mode 100644 tools/binman/test/18_pack_image_align.dts
create mode 100644 tools/binman/test/19_pack_inv_image_align.dts
create mode 100644 tools/binman/test/20_pack_inv_image_align_power2.dts
create mode 100644 tools/binman/test/21_image_pad.dts
create mode 100644 tools/binman/test/22_image_name.dts
create mode 100644 tools/binman/test/23_blob.dts
create mode 100644 tools/binman/test/24_sorted.dts
create mode 100644 tools/binman/test/25_pack_zero_size.dts
create mode 100644 tools/binman/test/26_pack_u_boot_dtb.dts
create mode 100644 tools/binman/test/27_pack_4gb_no_size.dts
create mode 100644 tools/binman/test/28_pack_4gb_outside.dts
create mode 100644 tools/binman/test/29_x86-rom.dts
create mode 100644 tools/binman/test/30_x86-rom-me-no-desc.dts
create mode 100644 tools/binman/test/31_x86-rom-me.dts
create mode 100644 tools/binman/test/32_intel-vga.dts
create mode 100644 tools/binman/test/33_x86-start16.dts
create mode 100644 tools/binman/test/34_x86_ucode.dts
create mode 100644 tools/binman/test/35_x86_single_ucode.dts
create mode 100644 tools/binman/test/36_u_boot_img.dts
create mode 100644 tools/binman/test/37_x86_no_ucode.dts
create mode 100644 tools/binman/test/38_x86_ucode_missing_node.dts
create mode 100644 tools/binman/test/39_x86_ucode_missing_node2.dts
create mode 100644 tools/binman/test/40_x86_ucode_not_in_image.dts
create mode 100644 tools/binman/test/41_unknown_pos_size.dts
create mode 100644 tools/binman/test/42_intel-fsp.dts
create mode 100644 tools/binman/test/43_intel-cmc.dts
create mode 100644 tools/binman/test/44_x86_optional_ucode.dts
create mode 100644 tools/binman/test/descriptor.bin
create mode 100755 tools/binman/test/u_boot_no_ucode_ptr
create mode 100644 tools/binman/test/u_boot_no_ucode_ptr.c
create mode 100755 tools/binman/test/u_boot_ucode_ptr
create mode 100644 tools/binman/test/u_boot_ucode_ptr.c
create mode 100644 tools/binman/test/u_boot_ucode_ptr.lds
--
2.8.0.rc3.226.g39d4020
More information about the U-Boot
mailing list