[U-Boot] [PATCH v2 5/14] common: Move environment choice to Kconfig

[Maxime Ripard]

The environment location is something that might change per board
(depending on what storage options are availaible there) or depending on
the user choice (when we have several options).

Instead of hardcoding it in our configuration header, create a Kconfig
choice with the options we use for now, and the symbols that depend on it.

Once done, also remove the irrelevant sunxi defines.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 common/Kconfig                 | 65 +++++++++++++++++++++++++++++++++++-
 include/configs/sunxi-common.h | 14 +-------
 include/environment.h          |  2 +-
 3 files changed, 70 insertions(+), 11 deletions(-)

diff --git a/common/Kconfig b/common/Kconfig
index 913d21a9ec58..3aa63db98314 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -158,6 +158,71 @@ config SPI_BOOT
 
 endmenu
 
+menu "Environment"
+
+choice
+	prompt "Environment Device"
+	default ENV_IS_IN_MMC if ARCH_SUNXI
+
+config ENV_IS_IN_MMC
+	bool "Environment in an MMC device"
+	depends on CMD_MMC
+	help
+	  Define this if you have an MMC device which you want to use for the
+	  environment.
+
+config ENV_IS_IN_NAND
+	bool "Environment in a NAND device"
+	depends on CMD_NAND
+	help
+	  Define this if you have a NAND device which you want to use for the
+	  environment.
+
+config ENV_IS_IN_UBI
+	bool "Environment in a UBI volume"
+	depends on CMD_UBI
+	depends on CMD_MTDPARTS
+	help
+	  Define this if you have a UBI volume which you want to use for the
+	  environment.
+
+config ENV_IS_NOWHERE
+	bool "Environment is not stored"
+	help
+	  Define this if you don't want to or can't have an environment stored
+	  on a storage medium
+
+endchoice
+
+config ENV_OFFSET
+	hex "Environment Offset"
+	depends on !ENV_IS_IN_UBI
+	depends on !ENV_IS_NOWHERE
+	default 0x88000 if ARCH_SUNXI
+	help
+	  Offset from the start of the device (or partition)
+
+config ENV_SIZE
+	hex "Environment Size"
+	depends on !ENV_IS_NOWHERE
+	default 0x20000 if ARCH_SUNXI
+	help
+	  Size of the environment storage area
+
+config ENV_UBI_PART
+	string "UBI partition name"
+	depends on ENV_IS_IN_UBI
+	help
+	  MTD partition containing the UBI device
+
+config ENV_UBI_VOLUME
+	string "UBI volume name"
+	depends on ENV_IS_IN_UBI
+	help
+	  Name of the volume that you want to store the environment in.
+
+endmenu
+
 config BOOTDELAY
 	int "delay in seconds before automatically booting"
 	default 2
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 8363414828fa..fd2677ba14a4 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -143,7 +143,9 @@
 #define CONFIG_GENERIC_MMC
 #define CONFIG_MMC_SUNXI
 #define CONFIG_MMC_SUNXI_SLOT		0
-#define CONFIG_ENV_IS_IN_MMC
+#endif
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_SYS_MMC_ENV_DEV		0	/* first detected MMC controller */
 #endif
 
@@ -175,9 +177,6 @@
 
 #define CONFIG_SYS_MONITOR_LEN		(768 << 10)	/* 768 KiB */
 
-#define CONFIG_ENV_OFFSET		(544 << 10) /* (8 + 24 + 512) KiB */
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-
 #define CONFIG_FAT_WRITE	/* enable write access */
 
 #define CONFIG_SPL_FRAMEWORK
@@ -349,13 +348,6 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 #endif
 
-#if !defined CONFIG_ENV_IS_IN_MMC && \
-    !defined CONFIG_ENV_IS_IN_NAND && \
-    !defined CONFIG_ENV_IS_IN_FAT && \
-    !defined CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
 #define CONFIG_MISC_INIT_R
 
 #ifndef CONFIG_SPL_BUILD
diff --git a/include/environment.h b/include/environment.h
index b602e8ac46b6..6f94986c6b3e 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -8,6 +8,8 @@
 #ifndef _ENVIRONMENT_H_
 #define _ENVIRONMENT_H_
 
+#include <linux/kconfig.h>
+
 /**************************************************************************
  *
  * The "environment" is stored as a list of '\0' terminated
-- 
git-series 0.8.11