[U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR

[Marek Vasut]

On 11/28/2016 07:27 AM, Lukasz Majewski wrote:
> This define gives the possibility to copy entire image (including header)
> from NOR parallel memory to e.g. SDRAM.
> 
> The legacy behavior is preserved, since other board don't enabled this option.
> 
> Signed-off-by: Lukasz Majewski <l.majewski at majess.pl>

What is the usecase ?

> ---
>  common/spl/Kconfig   | 10 ++++++++++
>  common/spl/spl_nor.c | 12 +++++++++---
>  2 files changed, 19 insertions(+), 3 deletions(-)
> 
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index df9e0ce..d31b26d 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -399,6 +399,16 @@ config SPL_NOR_SUPPORT
>  	  a memory-mapped device makes it very easy to access. Loading from
>  	  NOR is typically achieved with just a memcpy().
>  
> +config SPL_NOR_COPY_ENTIRE_IMAGE
> +	bool
> +	depends on SPL_NOR_SUPPORT
> +	prompt "Copy entire image from NOR memory"
> +	default n
> +	help
> +	  By default the SPL NOR driver supports copying only payload to
> +	  destination address. Say Y if you want to copy entire image (including
> +	  its image header).
> +
>  config SPL_ONENAND_SUPPORT
>  	bool "Support OneNAND flash"
>  	depends on SPL
> diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c
> index 6bfa399..44f3e99 100644
> --- a/common/spl/spl_nor.c
> +++ b/common/spl/spl_nor.c
> @@ -10,13 +10,15 @@
>  static int spl_nor_load_image(struct spl_image_info *spl_image,
>  			      struct spl_boot_device *bootdev)
>  {
> +	void *img_src;
>  	int ret;
> +#ifndef CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE
>  	/*
>  	 * Loading of the payload to SDRAM is done with skipping of
>  	 * the mkimage header in this SPL NOR driver
>  	 */
>  	spl_image->flags |= SPL_COPY_PAYLOAD_ONLY;
> -
> +#endif
>  #ifdef CONFIG_SPL_OS_BOOT
>  	if (!spl_start_uboot()) {
>  		const struct image_header *header;
> @@ -65,9 +67,13 @@ static int spl_nor_load_image(struct spl_image_info *spl_image,
>  	if (ret)
>  		return ret;
>  
> +	img_src = (void *)CONFIG_SYS_UBOOT_BASE;
> +#ifndef CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE
> +	img_src += sizeof(struct image_header));
> +#endif
> +
>  	memcpy((void *)(unsigned long)spl_image->load_addr,
> -	       (void *)(CONFIG_SYS_UBOOT_BASE + sizeof(struct image_header)),
> -	       spl_image->size);
> +	       img_src, spl_image->size);
>  
>  	return 0;
>  }
> 


-- 
Best regards,
Marek Vasut