[U-Boot] [PATCH V2] Add support of ls1021a-iot

[york sun]

On 11/02/2016 11:23 PM, feng.li_2 at nxp.com wrote:
> From: Feng Li <feng.li_2 at nxp.com>
>
> The patch add support ls1021a-iot.
> It supports I2C, MMC, PCIe, eTSEC, SATA,
> EEPROM, CPLD, HDMI, Serial port, HXCI,
> DSPI, SD boot, QSPI boot, Broadcom wifi
> card, QCA wifi card.

You wrapped too short. You already have a README file describing what is 
supported. I don't think it is necessary to put in the commit message. I 
will change it to "The patch adds support for Freescale ls1021a-iot 
board.". If you don't repin this patch for other reason, no action is 
needed from you.

>
> Signed-off-by: Feng Li <feng.li_2 at nxp.com>
> Cc: York Sun <york.sun at nxp.com>
> Cc: Alison Wang <alison.wang at nxp.com>
> ---
> Changes for V2:
> 	- CPU_V7_HAS_NONSEC and CPU_V7_HAS_VIRT are moved to Kconfig
> 	to correctly select ARMV7_PSCI.
> 	- CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_GTE_1_0 are
> 	deleted.
>
>  arch/arm/Kconfig                              |   15 +
>  arch/arm/dts/Makefile                         |    3 +-
>  arch/arm/dts/ls1021a-iot-duart.dts            |   16 ++
>  arch/arm/dts/ls1021a-iot.dtsi                 |  103 +++++++
>  board/freescale/ls1021aiot/Kconfig            |   15 +
>  board/freescale/ls1021aiot/MAINTAINERS        |    7 +
>  board/freescale/ls1021aiot/Makefile           |    9 +
>  board/freescale/ls1021aiot/README             |   58 ++++
>  board/freescale/ls1021aiot/dcu.c              |   47 ++++
>  board/freescale/ls1021aiot/ls1021aiot.c       |  259 +++++++++++++++++
>  board/freescale/ls1021aiot/ls102xa_pbi.cfg    |   14 +
>  board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg |   27 ++
>  board/freescale/ls1021aiot/psci.S             |   28 ++
>  configs/ls1021aiot_qspi_defconfig             |   15 +
>  configs/ls1021aiot_sdcard_defconfig           |   17 ++
>  include/configs/ls1021aiot.h                  |  367 +++++++++++++++++++++++++
>  16 files changed, 999 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/dts/ls1021a-iot-duart.dts
>  create mode 100644 arch/arm/dts/ls1021a-iot.dtsi
>  create mode 100644 board/freescale/ls1021aiot/Kconfig
>  create mode 100644 board/freescale/ls1021aiot/MAINTAINERS
>  create mode 100644 board/freescale/ls1021aiot/Makefile
>  create mode 100644 board/freescale/ls1021aiot/README
>  create mode 100644 board/freescale/ls1021aiot/dcu.c
>  create mode 100644 board/freescale/ls1021aiot/ls1021aiot.c
>  create mode 100644 board/freescale/ls1021aiot/ls102xa_pbi.cfg
>  create mode 100644 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
>  create mode 100644 board/freescale/ls1021aiot/psci.S
>  create mode 100644 configs/ls1021aiot_qspi_defconfig
>  create mode 100644 configs/ls1021aiot_sdcard_defconfig
>  create mode 100644 include/configs/ls1021aiot.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index d7a9b11..5a46ad4 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -761,6 +761,20 @@ config TARGET_LS1021ATWR
>  	select ARCH_SUPPORT_PSCI
>  	select LS1_DEEP_SLEEP
>
> +config	TARGET_LS1021AIOT

You should use a space instead of a tab here. It causes a false alarm 
when compiling. I will fix this when merging. No action is needed from you.

York