[U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Wed Nov 30 11:57:06 CET 2016
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit e94793c844a40606252f2e3f6428063e057b3fd2:
spl: add USB Gadget config option (2016-11-28 19:49:49 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 4db4d42ee290a8cad00b358b2e7ef6a00483893b:
imx6: clock: Enable External Memory Interface [EIM] clock
(eim_slow_clock) (2016-11-30 09:57:19 +0100)
----------------------------------------------------------------
Angus Ainslie (1):
imx7: SPI: add suport for SPI flash in mikroBUS slot
Breno Lima (1):
mx6sx: Add initial support for UDOO Neo Board
Christoph Fritz (2):
pwm: imx: increase support up to PWM8 for i.MX6SX
mx6sx: Add initial support for Samtec VIN|ING 2000 board
Eric Nelson (6):
tools: imximage: display DCD block offset, length
imx: mx6: ddr: add register MPZQLP2CTL for LPDDR2
mx6: ddr: allow 32 cycles for DQS gating calibration
mx6: ddr: pass mx6_ddr_sysinfo to calibration routines
mx6: ddr: add routine to return DDR calibration data
ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines
Heiko Schocher (2):
mx35: add DT support to flea3 board
mx35: adjust default environment for flea3 board
Ken Lin (1):
board: ge: bx50v3: add the PMIC configuration support
Lukasz Majewski (1):
imx6: clock: Enable External Memory Interface [EIM] clock
(eim_slow_clock)
Marcin Niestroj (1):
ARM: mx6: add MMC2 boot device detection support in SPL
Max Krummenacher (2):
spl: mmc: fix switch statement
imx: make ipu's di configurable
Peng Fan (1):
imx: mx6ull: update the REFTOP_VBGADJ setting
Sanchayan Maity (1):
colibri_vf: Read kernel and device tree from static UBI volumes
Sebastien Bourdelin (1):
ARM: ts4600: add basic board support
Soeren Moch (1):
tbs2910: Make Ethernet functional again
Stefan Agner (1):
arm: mx6: specify SPL padding
Stefano Babic (3):
mx35: factorize SDRAM setup in flea3
mx35: add GPIO setup on flea3 board
Merge branch 'master' of git://git.denx.de/u-boot
Sven Ebenfeld (1):
arm: imx: wandboard: fix compile error if CONFIG_VIDEO is deactivated
Ye.Li (1):
imx: mx6sx: Disable ENET clock before switching clock parent
arch/arm/Kconfig | 6 +
arch/arm/cpu/armv7/mx6/Kconfig | 20 ++
arch/arm/cpu/armv7/mx6/clock.c | 19 ++
arch/arm/cpu/armv7/mx6/ddr.c | 131 +++++---
arch/arm/cpu/armv7/mx6/soc.c | 31 +-
arch/arm/imx-common/spl.c | 6 +-
arch/arm/imx-common/video.c | 2 +-
arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/include/asm/arch-mx6/crm_regs.h | 1 +
arch/arm/include/asm/arch-mx6/mx6-ddr.h | 10 +-
arch/arm/include/asm/imx-common/video.h | 1 +
board/CarMediaLab/flea3/flea3.c | 124 ++-----
board/freescale/mx7dsabresd/mx7dsabresd.c | 24 ++
board/ge/bx50v3/bx50v3.c | 54 ++++
board/kosagi/novena/novena_spl.c | 4 +-
board/samtec/vining_2000/Kconfig | 12 +
board/samtec/vining_2000/MAINTAINERS | 6 +
board/samtec/vining_2000/Makefile | 6 +
board/samtec/vining_2000/imximage.cfg | 132 ++++++++
board/samtec/vining_2000/vining_2000.c | 517
++++++++++++++++++++++++++++++
board/tbs/tbs2910/tbs2910.c | 33 ++
board/technologic/ts4600/Kconfig | 15 +
board/technologic/ts4600/MAINTAINERS | 6 +
board/technologic/ts4600/Makefile | 11 +
board/technologic/ts4600/iomux.c | 149 +++++++++
board/technologic/ts4600/ts4600.c | 89 +++++
board/udoo/neo/Kconfig | 12 +
board/udoo/neo/MAINTAINERS | 7 +
board/udoo/neo/Makefile | 6 +
board/udoo/neo/neo.c | 441 +++++++++++++++++++++++++
board/wandboard/wandboard.c | 2 +
common/spl/spl_mmc.c | 1 -
configs/flea3_defconfig | 4 +
configs/mx7dsabresd_secure_defconfig | 3 +
configs/novena_defconfig | 1 +
configs/ts4600_defconfig | 18 ++
configs/udoo_neo_defconfig | 30 ++
configs/vining_2000_defconfig | 31 ++
drivers/pwm/pwm-imx-util.c | 12 +-
include/configs/colibri_vf.h | 6 +-
include/configs/flea3.h | 9 +-
include/configs/imx6_spl.h | 6 +
include/configs/mx7dsabresd.h | 3 +
include/configs/ts4600.h | 70 ++++
include/configs/udoo_neo.h | 94 ++++++
include/configs/vining_2000.h | 123 +++++++
include/configs/wandboard.h | 2 +
tools/imximage.c | 10 +-
48 files changed, 2144 insertions(+), 157 deletions(-)
create mode 100644 board/samtec/vining_2000/Kconfig
create mode 100644 board/samtec/vining_2000/MAINTAINERS
create mode 100644 board/samtec/vining_2000/Makefile
create mode 100644 board/samtec/vining_2000/imximage.cfg
create mode 100644 board/samtec/vining_2000/vining_2000.c
create mode 100644 board/technologic/ts4600/Kconfig
create mode 100644 board/technologic/ts4600/MAINTAINERS
create mode 100644 board/technologic/ts4600/Makefile
create mode 100644 board/technologic/ts4600/iomux.c
create mode 100644 board/technologic/ts4600/ts4600.c
create mode 100644 board/udoo/neo/Kconfig
create mode 100644 board/udoo/neo/MAINTAINERS
create mode 100644 board/udoo/neo/Makefile
create mode 100644 board/udoo/neo/neo.c
create mode 100644 configs/ts4600_defconfig
create mode 100644 configs/udoo_neo_defconfig
create mode 100644 configs/vining_2000_defconfig
create mode 100644 include/configs/ts4600.h
create mode 100644 include/configs/udoo_neo.h
create mode 100644 include/configs/vining_2000.h
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list