[U-Boot] [PATCH v2 2/7] ARM: stm32: cleanup stm32f7 files
Vikas MANOCHA
vikas.manocha at st.com
Thu Nov 24 02:48:03 CET 2016
Hi Michael,
> -----Original Message-----
> From: Michael Kurz [mailto:michi.kurz at gmail.com]
> Sent: Friday, November 04, 2016 12:21 PM
> To: u-boot at lists.denx.de
> Cc: Michael Kurz <michi.kurz at gmail.com>; Kamil Lulko <kamil.lulko at gmail.com>; Toshifumi NISHINAGA
> <tnishinaga.dev at gmail.com>; Vadzim Dambrouski <pftbest at gmail.com>; Albert Aribaud <albert.u.boot at aribaud.net>; Vikas
> MANOCHA <vikas.manocha at st.com>; Simon Glass <sjg at chromium.org>
> Subject: [PATCH v2 2/7] ARM: stm32: cleanup stm32f7 files
>
> Cleanup stm32f7 files:
> - use BIT macro
> - use GENMASK macro
> - prefix all constants with STM32_
Adding no value to add this prefix.
> - remove double constants
>
> Signed-off-by: Michael Kurz <michi.kurz at gmail.com>
>
> ---
>
> Changes in v2:
> - add cleanup patch
>
> arch/arm/include/asm/arch-stm32f4/stm32.h | 2 +-
> arch/arm/include/asm/arch-stm32f7/fmc.h | 7 +-
> arch/arm/include/asm/arch-stm32f7/gpt.h | 9 +-
> arch/arm/include/asm/arch-stm32f7/rcc.h | 64 -------
> arch/arm/include/asm/arch-stm32f7/stm32.h | 119 +++++-------
> arch/arm/include/asm/arch-stm32f7/stm32_periph.h | 3 +
> arch/arm/mach-stm32/stm32f7/clock.c | 227 ++++++++++++++---------
> arch/arm/mach-stm32/stm32f7/timer.c | 4 +-
> board/st/stm32f746-disco/stm32f746-disco.c | 10 +-
> drivers/mtd/stm32_flash.c | 2 +-
> drivers/serial/serial_stm32x7.c | 4 +-
> 11 files changed, 203 insertions(+), 248 deletions(-) delete mode 100644 arch/arm/include/asm/arch-stm32f7/rcc.h
>
> diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h
> index 6cc1966..b77345a 100644
> --- a/arch/arm/include/asm/arch-stm32f4/stm32.h
> +++ b/arch/arm/include/asm/arch-stm32f4/stm32.h
> @@ -102,7 +102,7 @@ struct stm32_pwr_regs {
> #define STM32_USART3_BASE (STM32_APB1PERIPH_BASE + 0x4800)
> #define STM32_USART6_BASE (STM32_APB2PERIPH_BASE + 0x1400)
>
> -#define FLASH_CNTL_BASE (STM32_AHB1PERIPH_BASE + 0x3C00)
> +#define STM32_FLASH_CNTL_BASE (STM32_AHB1PERIPH_BASE + 0x3C00)
>
> static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = {
> [0 ... 3] = 16 * 1024,
[...]
> -#define RCC_ENR_GPIO_J_EN (1 << 9)
> -#define RCC_ENR_GPIO_K_EN (1 << 10)
> -
> -#endif
Not a good design to delete the reset and clock related stuff contained in one header and moving it to source file/stm32.c
> diff --git a/arch/arm/include/asm/arch-stm32f7/stm32.h b/arch/arm/include/asm/arch-stm32f7/stm32.h
> index de55ae5..efc4fd7 100644
> --- a/arch/arm/include/asm/arch-stm32f7/stm32.h
> +++ b/arch/arm/include/asm/arch-stm32f7/stm32.h
> @@ -9,46 +9,47 @@
> #define _ASM_ARCH_HARDWARE_H
>
> /* STM32F746 */
> -#define ITCM_FLASH_BASE 0x00200000UL
> -#define AXIM_FLASH_BASE 0x08000000UL
> +#define STM32_ITCM_FLASH_BASE 0x00200000UL
> +#define STM32_AXIM_FLASH_BASE 0x08000000UL
> +
> +#define STM32_ITCM_SRAM_BASE 0x00000000UL
> +#define STM32_DTCM_SRAM_BASE 0x20000000UL
> +#define STM32_SRAM1_BASE 0x20010000UL
> +#define STM32_SRAM2_BASE 0x2004C000UL
> +
> +#define STM32_PERIPH_BASE 0x40000000UL
> +
> +#define STM32_APB1_PERIPH_BASE (STM32_PERIPH_BASE + 0x00000000)
> +#define STM32_APB2_PERIPH_BASE (STM32_PERIPH_BASE + 0x00010000)
> +#define STM32_AHB1_PERIPH_BASE (STM32_PERIPH_BASE + 0x00020000)
> +#define STM32_AHB2_PERIPH_BASE (STM32_PERIPH_BASE + 0x10000000)
> +#define STM32_AHB3_PERIPH_BASE (STM32_PERIPH_BASE + 0x20000000)
> +
> +#define STM32_TIM2_BASE (STM32_APB1_PERIPH_BASE + 0x0000)
> +#define STM32_USART2_BASE (STM32_APB1_PERIPH_BASE + 0x4400)
> +#define STM32_USART3_BASE (STM32_APB1_PERIPH_BASE + 0x4800)
> +#define STM32_PWR_BASE (STM32_APB1_PERIPH_BASE + 0x7000)
> +
> +#define STM32_USART1_BASE (STM32_APB2_PERIPH_BASE + 0x1000)
> +#define STM32_USART6_BASE (STM32_APB2_PERIPH_BASE + 0x1400)
> +#define STM32_SYSCFG_BASE (STM32_APB2_PERIPH_BASE + 0x3800)
> +
> +#define STM32_GPIOA_BASE (STM32_AHB1_PERIPH_BASE + 0x0000)
> +#define STM32_GPIOB_BASE (STM32_AHB1_PERIPH_BASE + 0x0400)
> +#define STM32_GPIOC_BASE (STM32_AHB1_PERIPH_BASE + 0x0800)
> +#define STM32_GPIOD_BASE (STM32_AHB1_PERIPH_BASE + 0x0C00)
> +#define STM32_GPIOE_BASE (STM32_AHB1_PERIPH_BASE + 0x1000)
> +#define STM32_GPIOF_BASE (STM32_AHB1_PERIPH_BASE + 0x1400)
> +#define STM32_GPIOG_BASE (STM32_AHB1_PERIPH_BASE + 0x1800)
> +#define STM32_GPIOH_BASE (STM32_AHB1_PERIPH_BASE + 0x1C00)
> +#define STM32_GPIOI_BASE (STM32_AHB1_PERIPH_BASE + 0x2000)
> +#define STM32_GPIOJ_BASE (STM32_AHB1_PERIPH_BASE + 0x2400)
> +#define STM32_GPIOK_BASE (STM32_AHB1_PERIPH_BASE + 0x2800)
> +#define STM32_RCC_BASE (STM32_AHB1_PERIPH_BASE + 0x3800)
> +#define STM32_FLASH_CNTL_BASE (STM32_AHB1_PERIPH_BASE + 0x3C00)
> +
> +#define STM32_SDRAM_FMC_BASE (STM32_AHB3_PERIPH_BASE + 0x40000140)
>
> -#define ITCM_SRAM_BASE 0x00000000UL
> -#define DTCM_SRAM_BASE 0x20000000UL
> -#define SRAM1_BASE 0x20010000UL
> -#define SRAM2_BASE 0x2004C000UL
> -
> -#define PERIPH_BASE 0x40000000UL
> -
> -#define APB1_PERIPH_BASE (PERIPH_BASE + 0x00000000)
> -#define APB2_PERIPH_BASE (PERIPH_BASE + 0x00010000)
> -#define AHB1_PERIPH_BASE (PERIPH_BASE + 0x00020000)
> -#define AHB2_PERIPH_BASE (PERIPH_BASE + 0x10000000)
> -#define AHB3_PERIPH_BASE (PERIPH_BASE + 0x20000000)
> -
> -#define TIM2_BASE (APB1_PERIPH_BASE + 0x0000)
> -#define USART2_BASE (APB1_PERIPH_BASE + 0x4400)
> -#define USART3_BASE (APB1_PERIPH_BASE + 0x4800)
> -#define PWR_BASE (APB1_PERIPH_BASE + 0x7000)
> -
> -#define USART1_BASE (APB2_PERIPH_BASE + 0x1000)
> -#define USART6_BASE (APB2_PERIPH_BASE + 0x1400)
> -
> -#define STM32_GPIOA_BASE (AHB1_PERIPH_BASE + 0x0000)
> -#define STM32_GPIOB_BASE (AHB1_PERIPH_BASE + 0x0400)
> -#define STM32_GPIOC_BASE (AHB1_PERIPH_BASE + 0x0800)
> -#define STM32_GPIOD_BASE (AHB1_PERIPH_BASE + 0x0C00)
> -#define STM32_GPIOE_BASE (AHB1_PERIPH_BASE + 0x1000)
> -#define STM32_GPIOF_BASE (AHB1_PERIPH_BASE + 0x1400)
> -#define STM32_GPIOG_BASE (AHB1_PERIPH_BASE + 0x1800)
> -#define STM32_GPIOH_BASE (AHB1_PERIPH_BASE + 0x1C00)
> -#define STM32_GPIOI_BASE (AHB1_PERIPH_BASE + 0x2000)
> -#define STM32_GPIOJ_BASE (AHB1_PERIPH_BASE + 0x2400)
> -#define STM32_GPIOK_BASE (AHB1_PERIPH_BASE + 0x2800)
> -#define RCC_BASE (AHB1_PERIPH_BASE + 0x3800)
> -#define FLASH_CNTL_BASE (AHB1_PERIPH_BASE + 0x3C00)
> -
> -
> -#define SDRAM_FMC_BASE (AHB3_PERIPH_BASE + 0x4A0000140)
>
> static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = {
> [0 ... 3] = 32 * 1024,
> @@ -62,43 +63,7 @@ enum clock {
> CLOCK_APB1,
> CLOCK_APB2
> };
> -#define STM32_BUS_MASK 0xFFFF0000
> -
> -struct stm32_rcc_regs {
> - u32 cr; /* RCC clock control */
> - u32 pllcfgr; /* RCC PLL configuration */
> - u32 cfgr; /* RCC clock configuration */
> - u32 cir; /* RCC clock interrupt */
> - u32 ahb1rstr; /* RCC AHB1 peripheral reset */
> - u32 ahb2rstr; /* RCC AHB2 peripheral reset */
> - u32 ahb3rstr; /* RCC AHB3 peripheral reset */
> - u32 rsv0;
> - u32 apb1rstr; /* RCC APB1 peripheral reset */
> - u32 apb2rstr; /* RCC APB2 peripheral reset */
> - u32 rsv1[2];
> - u32 ahb1enr; /* RCC AHB1 peripheral clock enable */
> - u32 ahb2enr; /* RCC AHB2 peripheral clock enable */
> - u32 ahb3enr; /* RCC AHB3 peripheral clock enable */
> - u32 rsv2;
> - u32 apb1enr; /* RCC APB1 peripheral clock enable */
> - u32 apb2enr; /* RCC APB2 peripheral clock enable */
> - u32 rsv3[2];
> - u32 ahb1lpenr; /* RCC AHB1 periph clk enable in low pwr mode */
> - u32 ahb2lpenr; /* RCC AHB2 periph clk enable in low pwr mode */
> - u32 ahb3lpenr; /* RCC AHB3 periph clk enable in low pwr mode */
> - u32 rsv4;
> - u32 apb1lpenr; /* RCC APB1 periph clk enable in low pwr mode */
> - u32 apb2lpenr; /* RCC APB2 periph clk enable in low pwr mode */
> - u32 rsv5[2];
> - u32 bdcr; /* RCC Backup domain control */
> - u32 csr; /* RCC clock control & status */
> - u32 rsv6[2];
> - u32 sscgr; /* RCC spread spectrum clock generation */
> - u32 plli2scfgr; /* RCC PLLI2S configuration */
> - u32 pllsaicfgr;
> - u32 dckcfgr;
> -};
> -#define STM32_RCC ((struct stm32_rcc_regs *)RCC_BASE)
> +#define STM32_BUS_MASK GENMASK(31, 16)
>
> struct stm32_pwr_regs {
> u32 cr1; /* power control register 1 */
> @@ -106,7 +71,7 @@ struct stm32_pwr_regs {
> u32 cr2; /* power control register 2 */
> u32 csr2; /* power control/status register 2 */ };
> -#define STM32_PWR ((struct stm32_pwr_regs *)PWR_BASE)
> +#define STM32_PWR ((struct stm32_pwr_regs *)STM32_PWR_BASE)
>
> int configure_clocks(void);
> unsigned long clock_get(enum clock clck); diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
> b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
> index 38adc4e..9b315a8 100644
> --- a/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
> +++ b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
> @@ -33,6 +33,9 @@ enum periph_clock {
> GPIO_I_CLOCK_CFG,
> GPIO_J_CLOCK_CFG,
> GPIO_K_CLOCK_CFG,
> + SYSCFG_CLOCK_CFG,
> + TIMER2_CLOCK_CFG,
> + FMC_CLOCK_CFG,
should be in separate patch.
> };
>
> #endif /* __ASM_ARM_ARCH_PERIPH_H */
> diff --git a/arch/arm/mach-stm32/stm32f7/clock.c b/arch/arm/mach-stm32/stm32f7/clock.c
> index 78d22d4..839d928 100644
> --- a/arch/arm/mach-stm32/stm32f7/clock.c
> +++ b/arch/arm/mach-stm32/stm32f7/clock.c
> @@ -7,80 +7,130 @@
>
> #include <common.h>
> #include <asm/io.h>
> -#include <asm/arch/rcc.h>
> #include <asm/arch/stm32.h>
> #include <asm/arch/stm32_periph.h>
>
> -#define RCC_CR_HSION (1 << 0)
> -#define RCC_CR_HSEON (1 << 16)
> -#define RCC_CR_HSERDY (1 << 17)
> -#define RCC_CR_HSEBYP (1 << 18)
> -#define RCC_CR_CSSON (1 << 19)
> -#define RCC_CR_PLLON (1 << 24)
> -#define RCC_CR_PLLRDY (1 << 25)
> +struct stm32_rcc_regs {
> + u32 cr; /* RCC clock control */
> + u32 pllcfgr; /* RCC PLL configuration */
> + u32 cfgr; /* RCC clock configuration */
> + u32 cir; /* RCC clock interrupt */
> + u32 ahb1rstr; /* RCC AHB1 peripheral reset */
> + u32 ahb2rstr; /* RCC AHB2 peripheral reset */
> + u32 ahb3rstr; /* RCC AHB3 peripheral reset */
> + u32 rsv0;
> + u32 apb1rstr; /* RCC APB1 peripheral reset */
> + u32 apb2rstr; /* RCC APB2 peripheral reset */
> + u32 rsv1[2];
> + u32 ahb1enr; /* RCC AHB1 peripheral clock enable */
> + u32 ahb2enr; /* RCC AHB2 peripheral clock enable */
> + u32 ahb3enr; /* RCC AHB3 peripheral clock enable */
> + u32 rsv2;
> + u32 apb1enr; /* RCC APB1 peripheral clock enable */
> + u32 apb2enr; /* RCC APB2 peripheral clock enable */
> + u32 rsv3[2];
> + u32 ahb1lpenr; /* RCC AHB1 periph clk enable in low pwr mode */
> + u32 ahb2lpenr; /* RCC AHB2 periph clk enable in low pwr mode */
> + u32 ahb3lpenr; /* RCC AHB3 periph clk enable in low pwr mode */
> + u32 rsv4;
> + u32 apb1lpenr; /* RCC APB1 periph clk enable in low pwr mode */
> + u32 apb2lpenr; /* RCC APB2 periph clk enable in low pwr mode */
> + u32 rsv5[2];
> + u32 bdcr; /* RCC Backup domain control */
> + u32 csr; /* RCC clock control & status */
> + u32 rsv6[2];
> + u32 sscgr; /* RCC spread spectrum clock generation */
> + u32 plli2scfgr; /* RCC PLLI2S configuration */
> + u32 pllsaicfgr; /* PLLSAI configuration */
> + u32 dckcfgr1; /* dedicated clocks configuration register 1 */
> + u32 dckcfgr2; /* dedicated clocks configuration register 2 */
> +};
Don't think its again good idea to move rcc struct from header to source.
> +#define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE)
>
> -#define RCC_PLLCFGR_PLLM_MASK 0x3F
> -#define RCC_PLLCFGR_PLLN_MASK 0x7FC0
> -#define RCC_PLLCFGR_PLLP_MASK 0x30000
> -#define RCC_PLLCFGR_PLLQ_MASK 0xF000000
> -#define RCC_PLLCFGR_PLLSRC (1 << 22)
[...]
Cheers,
Vikas
More information about the U-Boot
mailing list