[U-Boot] [PATCH v2 1/1] ARM: ts4600: add basic board support
Sebastien Bourdelin
sebastien.bourdelin at savoirfairelinux.com
Mon Nov 7 23:57:15 CET 2016
Hi,
I found an problem with this patch on the last rev B of the TS4600
due to a DRAM timing issue.
Please do not consider this patch until i post an other one.
Sorry for the noise,
Regards.
On 11/07/2016 02:30 PM, Sebastien Bourdelin wrote:
> This commit adds basic support including:
> MMC, Serial console
>
> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin at savoirfairelinux.com>
>
> ---
> Changes v1 -> v2:
> - remove useless define
> - remove eMMC muxing and init which doesn't exist on the TS4600 board
> - disable SSP1 and SSP2 clocks settings which are not currently used
>
> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin at savoirfairelinux.com>
> ---
> arch/arm/Kconfig | 6 ++
> board/technologic/ts4600/Kconfig | 15 +++++
> board/technologic/ts4600/MAINTAINERS | 6 ++
> board/technologic/ts4600/Makefile | 11 ++++
> board/technologic/ts4600/iomux.c | 119 +++++++++++++++++++++++++++++++++++
> board/technologic/ts4600/ts4600.c | 89 ++++++++++++++++++++++++++
> configs/ts4600_defconfig | 18 ++++++
> include/configs/ts4600.h | 70 +++++++++++++++++++++
> 8 files changed, 334 insertions(+)
> create mode 100644 board/technologic/ts4600/Kconfig
> create mode 100644 board/technologic/ts4600/MAINTAINERS
> create mode 100644 board/technologic/ts4600/Makefile
> create mode 100644 board/technologic/ts4600/iomux.c
> create mode 100644 board/technologic/ts4600/ts4600.c
> create mode 100644 configs/ts4600_defconfig
> create mode 100644 include/configs/ts4600.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index d7a9b11..142c445 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -579,6 +579,11 @@ config ARCH_SUNXI
> select USB_KEYBOARD
> select USE_TINY_PRINTF
>
> +config TARGET_TS4600
> + bool "Support TS4600"
> + select CPU_ARM926EJS
> + select SUPPORT_SPL
> +
> config TARGET_TS4800
> bool "Support TS4800"
> select CPU_V7
> @@ -1015,6 +1020,7 @@ source "board/ti/ti816x/Kconfig"
> source "board/timll/devkit3250/Kconfig"
> source "board/toradex/colibri_pxa270/Kconfig"
> source "board/toradex/colibri_vf/Kconfig"
> +source "board/technologic/ts4600/Kconfig"
> source "board/technologic/ts4800/Kconfig"
> source "board/vscom/baltos/Kconfig"
> source "board/woodburn/Kconfig"
> diff --git a/board/technologic/ts4600/Kconfig b/board/technologic/ts4600/Kconfig
> new file mode 100644
> index 0000000..d0dc2e1
> --- /dev/null
> +++ b/board/technologic/ts4600/Kconfig
> @@ -0,0 +1,15 @@
> +if TARGET_TS4600
> +
> +config SYS_BOARD
> + default "ts4600"
> +
> +config SYS_VENDOR
> + default "technologic"
> +
> +config SYS_SOC
> + default "mxs"
> +
> +config SYS_CONFIG_NAME
> + default "ts4600"
> +
> +endif
> diff --git a/board/technologic/ts4600/MAINTAINERS b/board/technologic/ts4600/MAINTAINERS
> new file mode 100644
> index 0000000..6f683b5
> --- /dev/null
> +++ b/board/technologic/ts4600/MAINTAINERS
> @@ -0,0 +1,6 @@
> +TS4600 BOARD
> +M: Sebastien Bourdelin <sebastien.bourdelin at savoirfairelinux.com>
> +S: Maintained
> +F: board/technologic/ts4600/
> +F: include/configs/ts4600.h
> +F: configs/ts4600_defconfig
> diff --git a/board/technologic/ts4600/Makefile b/board/technologic/ts4600/Makefile
> new file mode 100644
> index 0000000..faa2970
> --- /dev/null
> +++ b/board/technologic/ts4600/Makefile
> @@ -0,0 +1,11 @@
> +#
> +# (C) Copyright 2016 Savoir-faire Linux
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +ifndef CONFIG_SPL_BUILD
> +obj-y := ts4600.o
> +else
> +obj-y := iomux.o
> +endif
> diff --git a/board/technologic/ts4600/iomux.c b/board/technologic/ts4600/iomux.c
> new file mode 100644
> index 0000000..11d1723
> --- /dev/null
> +++ b/board/technologic/ts4600/iomux.c
> @@ -0,0 +1,119 @@
> +/*
> + * (C) Copyright 2016 Savoir-faire Linux Inc.
> + *
> + * Author: Sebastien Bourdelin <sebastien.bourdelin at savoirfairelinux.com>
> + *
> + * Based on work from TS7680 code by:
> + * Kris Bahnsen <kris at embeddedarm.com>
> + * Mark Featherston <mark at embeddedarm.com>
> + * https://github.com/embeddedarm/u-boot/tree/master/board/technologic/ts7680
> + *
> + * Derived from MX28EVK code by
> + * Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <config.h>
> +#include <asm/io.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/sys_proto.h>
> +
> +#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
> +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
> +
> +const iomux_cfg_t iomux_setup[] = {
> + /* DUART */
> + MX28_PAD_PWM0__DUART_RX,
> + MX28_PAD_PWM1__DUART_TX,
> +
> + /* MMC0 */
> + MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_SCK__SSP0_SCK |
> + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
> +
> + /* MMC0 slot power enable */
> + MX28_PAD_PWM3__GPIO_3_28 |
> + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
> +
> + /* EMI */
> + MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
> +
> + /* I2C */
> + MX28_PAD_I2C0_SCL__I2C0_SCL,
> + MX28_PAD_I2C0_SDA__I2C0_SDA,
> +
> +};
> +
> +#define HW_DRAM_CTL29 (0x74 >> 2)
> +#define CS_MAP 0xf
> +#define COLUMN_SIZE 0x2
> +#define ADDR_PINS 0x1
> +#define APREBIT 0xa
> +
> +#define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \
> + ADDR_PINS << 8 | APREBIT)
> +
> +void mxs_adjust_memory_params(uint32_t *dram_vals)
> +{
> + dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG;
> +}
> +
> +void board_init_ll(const uint32_t arg, const uint32_t *resptr)
> +{
> + mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
> +}
> diff --git a/board/technologic/ts4600/ts4600.c b/board/technologic/ts4600/ts4600.c
> new file mode 100644
> index 0000000..70dfead
> --- /dev/null
> +++ b/board/technologic/ts4600/ts4600.c
> @@ -0,0 +1,89 @@
> +/*
> + * (C) Copyright 2016 Savoir-faire Linux Inc.
> + *
> + * Author: Sebastien Bourdelin <sebastien.bourdelin at savoirfairelinux.com>
> + *
> + * Based on work from TS7680 code by:
> + * Kris Bahnsen <kris at embeddedarm.com>
> + * Mark Featherston <mark at embeddedarm.com>
> + * https://github.com/embeddedarm/u-boot/tree/master/board/technologic/ts7680
> + *
> + * Derived from MX28EVK code by
> + * Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
> +#include <linux/mii.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <errno.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int board_early_init_f(void)
> +{
> + /* IO0 clock at 480MHz */
> + mxs_set_ioclk(MXC_IOCLK0, 480000);
> + /* IO1 clock at 480MHz */
> + mxs_set_ioclk(MXC_IOCLK1, 480000);
> +
> + /* SSP0 clocks at 96MHz */
> + mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + return mxs_dram_init();
> +}
> +
> +int board_init(void)
> +{
> + /* Adress of boot parameters */
> + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_CMD_MMC
> +static int ts4600_mmc_cd(int id)
> +{
> + return 1;
> +}
> +
> +int board_mmc_init(bd_t *bis)
> +{
> + int ret;
> +
> + mxs_iomux_setup_pad(MX28_PAD_PWM3__GPIO_3_28);
> +
> + /* Power-on SD */
> + gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 1);
> + udelay(1000);
> + gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
> +
> + /* SD card */
> + ret = mxsmmc_initialize(bis, 0, NULL, ts4600_mmc_cd);
> + if(ret != 0) {
> + printf("SD controller initialized with %d\n", ret);
> + }
> +
> + return ret;
> +}
> +#endif
> +
> +int checkboard(void)
> +{
> + puts("Board: TS4600\n");
> +
> + return 0;
> +}
> diff --git a/configs/ts4600_defconfig b/configs/ts4600_defconfig
> new file mode 100644
> index 0000000..c052ded
> --- /dev/null
> +++ b/configs/ts4600_defconfig
> @@ -0,0 +1,18 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_TS4600=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_FIT=y
> +CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC"
> +CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> +CONFIG_SPL=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_OF_LIBFDT=y
> diff --git a/include/configs/ts4600.h b/include/configs/ts4600.h
> new file mode 100644
> index 0000000..9c8d29d
> --- /dev/null
> +++ b/include/configs/ts4600.h
> @@ -0,0 +1,70 @@
> +/*
> + * (C) Copyright 2016 Savoir-faire Linux Inc.
> + *
> + * Author: Sebastien Bourdelin <sebastien.bourdelin at savoirfairelinux.com>
> + *
> + * Derived from MX28EVK code by
> + * Fabio Estevam <fabio.estevam at freescale.com>
> + * Freescale Semiconductor, Inc.
> + *
> + * Configuration settings for the TS4600 Board
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +#ifndef __CONFIGS_TS4600_H__
> +#define __CONFIGS_TS4600_H__
> +
> +/* System configurations */
> +#define CONFIG_MX28 /* i.MX28 SoC */
> +
> +/* U-Boot Commands */
> +#define CONFIG_SYS_NO_FLASH /* No NOR Flash */
> +#define CONFIG_DOS_PARTITION
> +
> +/* Memory configuration */
> +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
> +#define PHYS_SDRAM_1 0x40000000 /* Base address */
> +#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> +
> +/* Environment */
> +#define CONFIG_ENV_SIZE (8 * 1024)
> +
> +/* Environment is in MMC */
> +#if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
> +#define CONFIG_ENV_OFFSET (256 * 1024)
> +#define CONFIG_SYS_MMC_ENV_DEV 0
> +#endif
> +
> +/* Boot Linux */
> +#define CONFIG_LOADADDR 0x42000000
> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> +
> +/* Extra Environment */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "fdt_addr=0x41000000\0" \
> + "loadkernel=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage\0" \
> + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ts4600.dtb\0" \
> + "loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot.ub\0" \
> + "bootscript=echo Running bootscript from mmc...; " \
> + "setenv mmcdev 0; " \
> + "setenv mmcpart 2; " \
> + "run loadbootscript && source ${loadaddr}; \0" \
> + "sdboot=echo Booting from SD card ...; " \
> + "setenv mmcdev 0; " \
> + "setenv mmcpart 2; " \
> + "setenv root /dev/mmcblk0p3; " \
> + "run loadkernel && run loadfdt; \0" \
> + "startbootsequence=run bootscript || run sdboot \0" \
> +
> +#define CONFIG_BOOTCOMMAND \
> + "mmc rescan; " \
> + "run startbootsequence; " \
> + "setenv cmdline_append console=ttyAMA0,115200; " \
> + "setenv bootargs root=${root} rootwait rw ${cmdline_append}; " \
> + "bootz ${loadaddr} - ${fdt_addr}; "
> +
> +/* The rest of the configuration is shared */
> +#include <configs/mxs.h>
> +
> +#endif /* __CONFIGS_TS4600_H__ */
>
More information about the U-Boot
mailing list