[U-Boot] [PATCH v2 3/4] arm: Remove VCMA9 board
Simon Glass
sjg at chromium.org
Wed Nov 23 14:01:31 CET 2016
This board has not been converted to DM_SERIAL by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
arch/arm/Kconfig | 5 -
board/mpl/common/common_util.c | 23 --
board/mpl/vcma9/Kconfig | 15 --
board/mpl/vcma9/MAINTAINERS | 6 -
board/mpl/vcma9/Makefile | 11 -
board/mpl/vcma9/cmd_vcma9.c | 119 ----------
board/mpl/vcma9/lowlevel_init.S | 500 ----------------------------------------
board/mpl/vcma9/vcma9.c | 209 -----------------
board/mpl/vcma9/vcma9.h | 28 ---
configs/VCMA9_defconfig | 17 --
include/configs/VCMA9.h | 205 ----------------
scripts/config_whitelist.txt | 1 -
12 files changed, 1139 deletions(-)
delete mode 100644 board/mpl/vcma9/Kconfig
delete mode 100644 board/mpl/vcma9/MAINTAINERS
delete mode 100644 board/mpl/vcma9/Makefile
delete mode 100644 board/mpl/vcma9/cmd_vcma9.c
delete mode 100644 board/mpl/vcma9/lowlevel_init.S
delete mode 100644 board/mpl/vcma9/vcma9.c
delete mode 100644 board/mpl/vcma9/vcma9.h
delete mode 100644 configs/VCMA9_defconfig
delete mode 100644 include/configs/VCMA9.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 398dbe0..993485a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -142,10 +142,6 @@ config TARGET_EDB93XX
bool "Support edb93xx"
select CPU_ARM920T
-config TARGET_VCMA9
- bool "Support VCMA9"
- select CPU_ARM920T
-
config TARGET_ASPENITE
bool "Support aspenite"
select CPU_ARM926EJS
@@ -971,7 +967,6 @@ source "board/h2200/Kconfig"
source "board/hisilicon/hikey/Kconfig"
source "board/imx31_phycore/Kconfig"
source "board/isee/igep0033/Kconfig"
-source "board/mpl/vcma9/Kconfig"
source "board/olimex/mx23_olinuxino/Kconfig"
source "board/phytec/pcm051/Kconfig"
source "board/phytec/pcm052/Kconfig"
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index a6edb6d..101b6ef 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -273,29 +273,6 @@ mpl_prg(uchar *src, ulong size)
return (1);
}
#endif /* defined(CONFIG_PATI) */
-
-#elif defined(CONFIG_VCMA9)
- start = 0;
-
- /* search end sector */
- for (i = 0; i < info->sector_count; i++)
- if (size < info->start[i])
- break;
-
- flash_protect(FLAG_PROTECT_CLEAR,
- start,
- size,
- info);
-
- /* now erase flash */
- printf("Erasing at %lx (sector %d) (start %lx)\n",
- start,0,info->start[0]);
- if ((rc = flash_erase (info, 0, i)) != 0) {
- puts("ERROR ");
- flash_perror(rc);
- return (1);
- }
-
#endif
printf("flash erased, programming from 0x%lx 0x%lx Bytes\n",
(ulong)src, size);
diff --git a/board/mpl/vcma9/Kconfig b/board/mpl/vcma9/Kconfig
deleted file mode 100644
index a156452..0000000
--- a/board/mpl/vcma9/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_VCMA9
-
-config SYS_BOARD
- default "vcma9"
-
-config SYS_VENDOR
- default "mpl"
-
-config SYS_SOC
- default "s3c24x0"
-
-config SYS_CONFIG_NAME
- default "VCMA9"
-
-endif
diff --git a/board/mpl/vcma9/MAINTAINERS b/board/mpl/vcma9/MAINTAINERS
deleted file mode 100644
index 3817436..0000000
--- a/board/mpl/vcma9/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-VCMA9 BOARD
-M: David Müller <d.mueller at elsoft.ch>
-S: Maintained
-F: board/mpl/vcma9/
-F: include/configs/VCMA9.h
-F: configs/VCMA9_defconfig
diff --git a/board/mpl/vcma9/Makefile b/board/mpl/vcma9/Makefile
deleted file mode 100644
index 175a19f..0000000
--- a/board/mpl/vcma9/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := ../common/common_util.o
-obj-y += vcma9.o cmd_vcma9.o
-
-obj-y += lowlevel_init.o
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
deleted file mode 100644
index c2d62e4..0000000
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * (C) Copyright 2002
- * Denis Peter, MPL AG Switzerland, d.peter at mpl.ch
- *
- * adapted for VCMA9
- * David Mueller, ELSOFT AG, d.mueller at elsoft.ch
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <net.h>
-#include "vcma9.h"
-#include "../common/common_util.h"
-
-#if defined(CONFIG_CS8900)
-#include <../drivers/net/cs8900.h>
-
-static uchar cs8900_chksum(ushort data)
-{
- return((data >> 8) & 0x00FF) + (data & 0x00FF);
-}
-
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- struct eth_device *dev;
- char cs8900_name[10];
- if (strcmp(argv[1], "info") == 0)
- {
- vcma9_print_info();
- return 0;
- }
-#if defined(CONFIG_CS8900)
- if (strcmp(argv[1], "cs8900") == 0) {
- sprintf(cs8900_name, "%s-0", CS8900_DRIVERNAME);
- dev = eth_get_dev_by_name(cs8900_name);
- if (!dev) {
- printf("Couldn't find CS8900 driver");
- return 0;
- }
- if (strcmp(argv[2], "read") == 0) {
- uchar addr; ushort data;
-
- addr = simple_strtoul(argv[3], NULL, 16);
- cs8900_e2prom_read(dev, addr, &data);
- printf("0x%2.2X: 0x%4.4X\n", addr, data);
- } else if (strcmp(argv[2], "write") == 0) {
- uchar addr; ushort data;
-
- addr = simple_strtoul(argv[3], NULL, 16);
- data = simple_strtoul(argv[4], NULL, 16);
- cs8900_e2prom_write(dev, addr, data);
- } else if (strcmp(argv[2], "setaddr") == 0) {
- uchar addr, i, csum; ushort data;
- uchar ethaddr[6];
-
- /* check for valid ethaddr */
- if (eth_getenv_enetaddr("ethaddr", ethaddr)) {
- addr = 1;
- data = 0x2158;
- cs8900_e2prom_write(dev, addr, data);
- csum = cs8900_chksum(data);
- addr++;
- for (i = 0; i < 6; i+=2) {
- data = ethaddr[i+1] << 8 |
- ethaddr[i];
- cs8900_e2prom_write(dev, addr, data);
- csum += cs8900_chksum(data);
- addr++;
- }
- /* calculate header link byte */
- data = 0xA100 | (addr * 2);
- cs8900_e2prom_write(dev, 0, data);
- csum += cs8900_chksum(data);
- /* write checksum word */
- cs8900_e2prom_write(dev, addr, (0 - csum) << 8);
- } else {
- puts("\nplease defined 'ethaddr'\n");
- }
- } else if (strcmp(argv[2], "dump") == 0) {
- uchar addr = 0, endaddr, csum; ushort data;
-
- puts("Dump of CS8900 config device: ");
- cs8900_e2prom_read(dev, addr, &data);
- if ((data & 0xE000) == 0xA000) {
- endaddr = (data & 0x00FF) / 2;
- csum = cs8900_chksum(data);
- for (addr = 1; addr <= endaddr; addr++) {
- cs8900_e2prom_read(dev, addr, &data);
- printf("\n0x%2.2X: 0x%4.4X", addr, data);
- csum += cs8900_chksum(data);
- }
- printf("\nChecksum: %s", (csum == 0) ? "ok" : "wrong");
- } else {
- puts("no valid config found");
- }
- puts("\n");
- }
-
- return 0;
- }
-#endif
-
- return (do_mplcommon(cmdtp, flag, argc, argv));
-}
-
-U_BOOT_CMD(
- vcma9, 6, 1, do_vcma9,
- "VCMA9 specific commands",
- "flash mem [SrcAddr] - updates U-Boot with image in memory\n"
- "vcma9 info - displays board information"
-);
diff --git a/board/mpl/vcma9/lowlevel_init.S b/board/mpl/vcma9/lowlevel_init.S
deleted file mode 100644
index c0d6cc8..0000000
--- a/board/mpl/vcma9/lowlevel_init.S
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- *
- * Modified for MPL VCMA9 by
- * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
- * (C) Copyright 2002, 2003, 2004, 2005
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include <config.h>
-
-/* register definitions */
-
-#define PLD_BASE 0x28000000
-#define MISC_REG 0x103
-#define SDRAM_REG 0x106
-#define BWSCON 0x48000000
-#define CLKBASE 0x4C000000
-#define LOCKTIME 0x0
-#define MPLLCON 0x4
-#define UPLLCON 0x8
-#define GPIOBASE 0x56000000
-#define GSTATUS1 0xB0
-#define FASTCPU 0x02
-
-/* some parameters for the board */
-/* BWSCON */
-#define DW8 (0x0)
-#define DW16 (0x1)
-#define DW32 (0x2)
-#define WAIT (0x1<<2)
-#define UBLB (0x1<<3)
-
-/* BANKSIZE */
-#define BURST_EN (0x1<<7)
-
-/* BANK0CON 200 */
-#define B0_Tacs_200 0x0 /* 0clk (or 0x1 1clk) */
-#define B0_Tcos_200 0x1 /* 1clk (or 0x2 2clk) */
-#define B0_Tacc_200 0x5 /* 8clk (or 0x6 10clk) */
-#define B0_Tcoh_200 0x0 /* 0clk */
-#define B0_Tcah_200 0x3 /* 4clk (or0x01 1clk) */
-#define B0_Tacp_200 0x0 /* page mode is not used */
-#define B0_PMC_200 0x0 /* page mode disabled */
-
-/* BANK0CON 250 */
-#define B0_Tacs_250 0x0 /* 0clk (or 0x1 1clk) */
-#define B0_Tcos_250 0x1 /* 1clk (or 0x2 2clk) */
-#define B0_Tacc_250 0x5 /* 8clk (or 0x7 14clk) */
-#define B0_Tcoh_250 0x0 /* 0clk */
-#define B0_Tcah_250 0x3 /* 4clk (or 0x1 1clk) */
-#define B0_Tacp_250 0x0 /* page mode is not used */
-#define B0_PMC_250 0x0 /* page mode disabled */
-
-/* BANK0CON 266 */
-#define B0_Tacs_266 0x0 /* 0clk (or 0x1 1clk) */
-#define B0_Tcos_266 0x1 /* 1clk (or 0x2 2clk) */
-#define B0_Tacc_266 0x6 /* 10clk (or 0x7 14clk) */
-#define B0_Tcoh_266 0x0 /* 0clk */
-#define B0_Tcah_266 0x3 /* 4clk (or 0x1 1clk) */
-#define B0_Tacp_266 0x0 /* page mode is not used */
-#define B0_PMC_266 0x0 /* page mode disabled */
-
-/* BANK1CON 200 */
-#define B1_Tacs_200 0x0 /* 0clk (or 0x1 1clk) */
-#define B1_Tcos_200 0x1 /* 1clk (or 0x2 2clk) */
-#define B1_Tacc_200 0x5 /* 8clk (or 0x6 10clk) */
-#define B1_Tcoh_200 0x0 /* 0clk */
-#define B1_Tcah_200 0x3 /* 4clk (or 0x1 1clk) */
-#define B1_Tacp_200 0x0 /* page mode is not used */
-#define B1_PMC_200 0x0 /* page mode disabled */
-
-/* BANK1CON 250 */
-#define B1_Tacs_250 0x0 /* 0clk (or 0x1 1clk) */
-#define B1_Tcos_250 0x1 /* 1clk (or 0x2 2clk) */
-#define B1_Tacc_250 0x5 /* 8clk (or 0x7 14clk) */
-#define B1_Tcoh_250 0x0 /* 0clk */
-#define B1_Tcah_250 0x3 /* 4clk (or 0x1 1clk) */
-#define B1_Tacp_250 0x0 /* page mode is not used */
-#define B1_PMC_250 0x0 /* page mode disabled */
-
-/* BANK1CON 266 */
-#define B1_Tacs_266 0x0 /* 0clk (or 0x1 1clk) */
-#define B1_Tcos_266 0x1 /* 1clk (or 0x2 2clk) */
-#define B1_Tacc_266 0x6 /* 10clk (or 0x7 14clk) */
-#define B1_Tcoh_266 0x0 /* 0clk */
-#define B1_Tcah_266 0x3 /* 4clk (or 0x1 1clk) */
-#define B1_Tacp_266 0x0 /* page mode is not used */
-#define B1_PMC_266 0x0 /* page mode disabled */
-
-/* BANK2CON 200 + 250 + 266 */
-#define B2_Tacs 0x3 /* 4clk */
-#define B2_Tcos 0x3 /* 4clk */
-#define B2_Tacc 0x7 /* 14clk */
-#define B2_Tcoh 0x3 /* 4clk */
-#define B2_Tcah 0x3 /* 4clk */
-#define B2_Tacp 0x0 /* page mode is not used */
-#define B2_PMC 0x0 /* page mode disabled */
-
-/* BANK3CON 200 + 250 + 266 */
-#define B3_Tacs 0x3 /* 4clk */
-#define B3_Tcos 0x3 /* 4clk */
-#define B3_Tacc 0x7 /* 14clk */
-#define B3_Tcoh 0x3 /* 4clk */
-#define B3_Tcah 0x3 /* 4clk */
-#define B3_Tacp 0x0 /* page mode is not used */
-#define B3_PMC 0x0 /* page mode disabled */
-
-/* BANK4CON 200 */
-#define B4_Tacs_200 0x1 /* 1clk */
-#define B4_Tcos_200 0x3 /* 4clk */
-#define B4_Tacc_200 0x7 /* 14clk */
-#define B4_Tcoh_200 0x3 /* 4clk */
-#define B4_Tcah_200 0x2 /* 2clk */
-#define B4_Tacp_200 0x0 /* page mode is not used */
-#define B4_PMC_200 0x0 /* page mode disabled */
-
-/* BANK4CON 250 */
-#define B4_Tacs_250 0x1 /* 1clk */
-#define B4_Tcos_250 0x3 /* 4clk */
-#define B4_Tacc_250 0x7 /* 14clk */
-#define B4_Tcoh_250 0x3 /* 4clk */
-#define B4_Tcah_250 0x2 /* 2clk */
-#define B4_Tacp_250 0x0 /* page mode is not used */
-#define B4_PMC_250 0x0 /* page mode disabled */
-
-/* BANK4CON 266 */
-#define B4_Tacs_266 0x1 /* 1clk */
-#define B4_Tcos_266 0x3 /* 4clk */
-#define B4_Tacc_266 0x7 /* 14clk */
-#define B4_Tcoh_266 0x3 /* 4clk */
-#define B4_Tcah_266 0x2 /* 2clk */
-#define B4_Tacp_266 0x0 /* page mode is not used */
-#define B4_PMC_266 0x0 /* page mode disabled */
-
-/* BANK5CON 200 */
-#define B5_Tacs_200 0x0 /* 0clk */
-#define B5_Tcos_200 0x3 /* 4clk */
-#define B5_Tacc_200 0x4 /* 6clk */
-#define B5_Tcoh_200 0x3 /* 4clk */
-#define B5_Tcah_200 0x1 /* 1clk */
-#define B5_Tacp_200 0x0 /* page mode is not used */
-#define B5_PMC_200 0x0 /* page mode disabled */
-
-/* BANK5CON 250 */
-#define B5_Tacs_250 0x0 /* 0clk */
-#define B5_Tcos_250 0x3 /* 4clk */
-#define B5_Tacc_250 0x5 /* 8clk */
-#define B5_Tcoh_250 0x3 /* 4clk */
-#define B5_Tcah_250 0x1 /* 1clk */
-#define B5_Tacp_250 0x0 /* page mode is not used */
-#define B5_PMC_250 0x0 /* page mode disabled */
-
-/* BANK5CON 266 */
-#define B5_Tacs_266 0x0 /* 0clk */
-#define B5_Tcos_266 0x3 /* 4clk */
-#define B5_Tacc_266 0x5 /* 8clk */
-#define B5_Tcoh_266 0x3 /* 4clk */
-#define B5_Tcah_266 0x1 /* 1clk */
-#define B5_Tacp_266 0x0 /* page mode is not used */
-#define B5_PMC_266 0x0 /* page mode disabled */
-
-#define B6_MT 0x3 /* SDRAM */
-#define B6_Trcd_200 0x0 /* 2clk */
-#define B6_Trcd_250 0x1 /* 3clk */
-#define B6_Trcd_266 0x1 /* 3clk */
-#define B6_SCAN 0x2 /* 10bit */
-
-#define B7_MT 0x3 /* SDRAM */
-#define B7_Trcd_200 0x0 /* 2clk */
-#define B7_Trcd_250 0x1 /* 3clk */
-#define B7_Trcd_266 0x1 /* 3clk */
-#define B7_SCAN 0x2 /* 10bit */
-
-/* REFRESH parameter */
-#define REFEN 0x1 /* Refresh enable */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-#define Trp_200 0x0 /* 2clk */
-#define Trp_250 0x1 /* 3clk */
-#define Trp_266 0x1 /* 3clk */
-#define Tsrc_200 0x1 /* 5clk */
-#define Tsrc_250 0x2 /* 6clk */
-#define Tsrc_266 0x3 /* 7clk */
-
-/* period=15.6us, HCLK=100Mhz, (2048+1-15.6*100) */
-#define REFCNT_200 489
-/* period=15.6us, HCLK=125Mhz, (2048+1-15.6*125) */
-#define REFCNT_250 99
-/* period=15.6us, HCLK=133Mhz, (2048+1-15.6*133) */
-#define REFCNT_266 0
-/**************************************/
-
-.globl lowlevel_init
-lowlevel_init:
- /* use r0 to relocate DATA read/write to flash rather than memory ! */
- ldr r0, =CONFIG_SYS_TEXT_BASE
- ldr r13, =BWSCON
-
- /* enable minimal access to PLD */
- ldr r1, [r13] /* load default BWSCON */
- orr r1, r1, #(DW8 + UBLB) << 20 /* set necessary CS attrs */
- str r1, [r13] /* set BWSCON */
- ldr r1, =0x7FF0 /* select slowest timing */
- str r1, [r13, #0x18] /* set BANKCON5 */
-
- ldr r1, =PLD_BASE
- ldr r2, =SETUPDATA
- ldrb r1, [r1, #MISC_REG]
- sub r2, r2, r0
- tst r1, #FASTCPU /* FASTCPU available ? */
- addeq r2, r2, #SETUPENTRY_SIZE
-
- /* memory control configuration */
- /* r2 = pointer into timing table */
- /* r13 = pointer to MEM controller regs (starting with BWSCON) */
- add r3, r2, #CSDATA_OFFSET
- add r4, r3, #CSDATAENTRY_SIZE
-0:
- ldr r1, [r3], #4
- str r1, [r13], #4
- cmp r3, r4
- bne 0b
-
- /* PLD access is now possible */
- /* r3 = SDRAMDATA */
- /* r13 = pointer to MEM controller regs */
- ldr r1, =PLD_BASE
- mov r4, #SDRAMENTRY_SIZE
- ldrb r1, [r1, #SDRAM_REG]
- /* calculate start and end point */
- mla r3, r4, r1, r3
- add r4, r3, r4
-0:
- ldr r1, [r3], #4
- str r1, [r13], #4
- cmp r3, r4
- bne 0b
-
- /* setup MPLL registers */
- ldr r1, =CLKBASE
- ldr r4, =0xFFFFFF
- add r3, r2, #4 /* r3 points to PLL values */
- str r4, [r1, #LOCKTIME]
- ldmia r3, {r4,r5}
- str r5, [r1, #UPLLCON] /* writing PLL register */
- /* !! order seems to be important !! */
- /* a little delay */
- ldr r3, =0x4000
-0:
- subs r3, r3, #1
- bne 0b
-
- str r4, [r1, #MPLLCON] /* writing PLL register */
- /* !! order seems to be important !! */
- /* a little delay */
- ldr r3, =0x4000
-0:
- subs r3, r3, #1
- bne 0b
-
- /* everything is fine now */
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-#define MK_BWSCON(bws1, bws2, bws3, bws4, bws5, bws6, bws7) \
- ((bws1) << 4) + \
- ((bws2) << 8) + \
- ((bws3) << 12) + \
- ((bws4) << 16) + \
- ((bws5) << 20) + \
- ((bws6) << 24) + \
- ((bws7) << 28)
-
-#define MK_BANKCON(tacs, tcos, tacc, tcoh, tcah, tacp, pmc) \
- ((tacs) << 13) + \
- ((tcos) << 11) + \
- ((tacc) << 8) + \
- ((tcoh) << 6) + \
- ((tcah) << 4) + \
- ((tacp) << 2) + \
- (pmc)
-
-#define MK_BANKCON_SDRAM(trcd, scan) \
- ((0x03) << 15) + \
- ((trcd) << 2) + \
- (scan)
-
-#define MK_SDRAM_REFRESH(enable, trefmd, trp, tsrc, cnt) \
- ((enable) << 23) + \
- ((trefmd) << 22) + \
- ((trp) << 20) + \
- ((tsrc) << 18) + \
- (cnt)
-
-SETUPDATA:
- .word 0x32410002
- /* PLL values (MDIV, PDIV, SDIV) for 250 MHz */
- .word (0x75 << 12) + (0x01 << 4) + (0x01 << 0)
- /* PLL values for USB clock */
- .word (0x48 << 12) + (0x03 << 4) + (0x02 << 0)
-
- /* timing for 250 MHz*/
-0:
- .equiv CSDATA_OFFSET, (. - SETUPDATA)
- .word MK_BWSCON(DW16, \
- DW32, \
- DW32, \
- DW16 + WAIT + UBLB, \
- DW8 + UBLB, \
- DW32, \
- DW32)
-
- .word MK_BANKCON(B0_Tacs_250, \
- B0_Tcos_250, \
- B0_Tacc_250, \
- B0_Tcoh_250, \
- B0_Tcah_250, \
- B0_Tacp_250, \
- B0_PMC_250)
-
- .word MK_BANKCON(B1_Tacs_250, \
- B1_Tcos_250, \
- B1_Tacc_250, \
- B1_Tcoh_250, \
- B1_Tcah_250, \
- B1_Tacp_250, \
- B1_PMC_250)
-
- .word MK_BANKCON(B2_Tacs, \
- B2_Tcos, \
- B2_Tacc, \
- B2_Tcoh, \
- B2_Tcah, \
- B2_Tacp, \
- B2_PMC)
-
- .word MK_BANKCON(B3_Tacs, \
- B3_Tcos, \
- B3_Tacc, \
- B3_Tcoh, \
- B3_Tcah, \
- B3_Tacp, \
- B3_PMC)
-
- .word MK_BANKCON(B4_Tacs_250, \
- B4_Tcos_250, \
- B4_Tacc_250, \
- B4_Tcoh_250, \
- B4_Tcah_250, \
- B4_Tacp_250, \
- B4_PMC_250)
-
- .word MK_BANKCON(B5_Tacs_250, \
- B5_Tcos_250, \
- B5_Tacc_250, \
- B5_Tcoh_250, \
- B5_Tcah_250, \
- B5_Tacp_250, \
- B5_PMC_250)
-
- .equiv CSDATAENTRY_SIZE, (. - 0b)
- /* 4Mx8x4 */
-0:
- .word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
- .word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
- .word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
- .word 0x32 + BURST_EN
- .word 0x30
- .word 0x30
- .equiv SDRAMENTRY_SIZE, (. - 0b)
-
- /* 8Mx8x4 */
- .word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
- .word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
- .word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
- .word 0x32 + BURST_EN
- .word 0x30
- .word 0x30
-
- /* 2Mx8x4 */
- .word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
- .word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
- .word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
- .word 0x32 + BURST_EN
- .word 0x30
- .word 0x30
-
- /* 4Mx8x2 */
- .word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
- .word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
- .word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
- .word 0x32 + BURST_EN
- .word 0x30
- .word 0x30
-
- .equiv SETUPENTRY_SIZE, (. - SETUPDATA)
-
- .word 0x32410000
- /* PLL values (MDIV, PDIV, SDIV) for 200 MHz (Fout = 202.8MHz) */
- .word (0xA1 << 12) + (0x03 << 4) + (0x01 << 0)
- /* PLL values for USB clock */
- .word (0x48 << 12) + (0x03 << 4) + (0x02 << 0)
-
- /* timing for 200 MHz and default*/
- .word MK_BWSCON(DW16, \
- DW32, \
- DW32, \
- DW16 + WAIT + UBLB, \
- DW8 + UBLB, \
- DW32, \
- DW32)
-
- .word MK_BANKCON(B0_Tacs_200, \
- B0_Tcos_200, \
- B0_Tacc_200, \
- B0_Tcoh_200, \
- B0_Tcah_200, \
- B0_Tacp_200, \
- B0_PMC_200)
-
- .word MK_BANKCON(B1_Tacs_200, \
- B1_Tcos_200, \
- B1_Tacc_200, \
- B1_Tcoh_200, \
- B1_Tcah_200, \
- B1_Tacp_200, \
- B1_PMC_200)
-
- .word MK_BANKCON(B2_Tacs, \
- B2_Tcos, \
- B2_Tacc, \
- B2_Tcoh, \
- B2_Tcah, \
- B2_Tacp, \
- B2_PMC)
-
- .word MK_BANKCON(B3_Tacs, \
- B3_Tcos, \
- B3_Tacc, \
- B3_Tcoh, \
- B3_Tcah, \
- B3_Tacp, \
- B3_PMC)
-
- .word MK_BANKCON(B4_Tacs_200, \
- B4_Tcos_200, \
- B4_Tacc_200, \
- B4_Tcoh_200, \
- B4_Tcah_200, \
- B4_Tacp_200, \
- B4_PMC_200)
-
- .word MK_BANKCON(B5_Tacs_200, \
- B5_Tcos_200, \
- B5_Tacc_200, \
- B5_Tcoh_200, \
- B5_Tcah_200, \
- B5_Tacp_200, \
- B5_PMC_200)
-
- /* 4Mx8x4 */
- .word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
- .word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
- .word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
- .word 0x32 + BURST_EN
- .word 0x30
- .word 0x30
-
- /* 8Mx8x4 */
- .word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
- .word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
- .word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
- .word 0x32 + BURST_EN
- .word 0x30
- .word 0x30
-
- /* 2Mx8x4 */
- .word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
- .word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
- .word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
- .word 0x32 + BURST_EN
- .word 0x30
- .word 0x30
-
- /* 4Mx8x2 */
- .word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
- .word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
- .word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
- .word 0x32 + BURST_EN
- .word 0x30
- .word 0x30
-
- .equiv SETUPDATA_SIZE, (. - SETUPDATA)
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
deleted file mode 100644
index 43a3d47..0000000
--- a/board/mpl/vcma9/vcma9.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- *
- * (C) Copyright 2002, 2010
- * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-#include "vcma9.h"
-#include "../common/common_util.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_early_init_f(void)
-{
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- /* set up the I/O ports */
- writel(0x007FFFFF, &gpio->gpacon);
- writel(0x002AAAAA, &gpio->gpbcon);
- writel(0x000002BF, &gpio->gpbup);
- writel(0xAAAAAAAA, &gpio->gpccon);
- writel(0x0000FFFF, &gpio->gpcup);
- writel(0xAAAAAAAA, &gpio->gpdcon);
- writel(0x0000FFFF, &gpio->gpdup);
- writel(0xAAAAAAAA, &gpio->gpecon);
- writel(0x000037F7, &gpio->gpeup);
- writel(0x00000000, &gpio->gpfcon);
- writel(0x00000000, &gpio->gpfup);
- writel(0xFFEAFF5A, &gpio->gpgcon);
- writel(0x0000F0DC, &gpio->gpgup);
- writel(0x0028AAAA, &gpio->gphcon);
- writel(0x00000656, &gpio->gphup);
-
- /* setup correct IRQ modes for NIC (rising edge mode) */
- writel((readl(&gpio->extint2) & ~(7<<8)) | (4<<8), &gpio->extint2);
-
- /* select USB port 2 to be host or device (setup as host for now) */
- writel(readl(&gpio->misccr) | 0x08, &gpio->misccr);
-
- return 0;
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x30000100;
-
- icache_enable();
- dcache_enable();
-
- return 0;
-}
-
-/*
- * Get some Board/PLD Info
- */
-
-static u8 get_pld_reg(enum vcma9_pld_regs reg)
-{
- return readb(VCMA9_PLD_BASE + reg);
-}
-
-static u8 get_pld_version(void)
-{
- return (get_pld_reg(VCMA9_PLD_ID) >> 4) & 0x0F;
-}
-
-static u8 get_pld_revision(void)
-{
- return get_pld_reg(VCMA9_PLD_ID) & 0x0F;
-}
-
-static uchar get_board_pcb(void)
-{
- return ((get_pld_reg(VCMA9_PLD_BOARD) >> 4) & 0x03) + 'A';
-}
-
-static u8 get_nr_chips(void)
-{
- switch ((get_pld_reg(VCMA9_PLD_SDRAM) >> 4) & 0x0F) {
- case 0: return 4;
- case 1: return 1;
- case 2: return 2;
- default: return 0;
- }
-}
-
-static ulong get_chip_size(void)
-{
- switch (get_pld_reg(VCMA9_PLD_SDRAM) & 0x0F) {
- case 0: return 16 * (1024*1024);
- case 1: return 32 * (1024*1024);
- case 2: return 8 * (1024*1024);
- case 3: return 8 * (1024*1024);
- default: return 0;
- }
-}
-
-static const char *get_chip_geom(void)
-{
- switch (get_pld_reg(VCMA9_PLD_SDRAM) & 0x0F) {
- case 0: return "4Mx8x4";
- case 1: return "8Mx8x4";
- case 2: return "2Mx8x4";
- case 3: return "4Mx8x2";
- default: return "unknown";
- }
-}
-
-static void vcma9_show_info(char *board_name, char *serial)
-{
- printf("Board: %s SN: %s PCB Rev: %c PLD(%d,%d)\n",
- board_name, serial,
- get_board_pcb(), get_pld_version(), get_pld_revision());
- printf("SDRAM: %d chips %s\n", get_nr_chips(), get_chip_geom());
-}
-
-int dram_init(void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_chip_size() * get_nr_chips();
- return 0;
-}
-
-/*
- * Check Board Identity:
- */
-
-int checkboard(void)
-{
- char s[50];
- int i;
- backup_t *b = (backup_t *) s;
-
- i = getenv_f("serial#", s, 32);
- if ((i < 0) || strncmp (s, "VCMA9", 5)) {
- get_backup_values (b);
- if (strncmp (b->signature, "MPL\0", 4) != 0) {
- puts ("### No HW ID - assuming VCMA9");
- } else {
- b->serial_name[5] = 0;
- vcma9_show_info(b->serial_name, &b->serial_name[6]);
- }
- } else {
- s[5] = 0;
- vcma9_show_info(s, &s[6]);
- }
-
- return 0;
-}
-
-int board_late_init(void)
-{
- /*
- * check if environment is healthy, otherwise restore values
- * from shadow copy
- */
- check_env();
- return 0;
-}
-
-void vcma9_print_info(void)
-{
- char *s = getenv("serial#");
-
- if (!s) {
- puts ("### No HW ID - assuming VCMA9");
- } else {
- s[5] = 0;
- vcma9_show_info(s, &s[6]);
- }
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
-
-/*
- * Hardcoded flash setup:
- * Flash 0 is a non-CFI AMD AM29F400BB flash.
- */
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
- info->portwidth = FLASH_CFI_16BIT;
- info->chipwidth = FLASH_CFI_BY16;
- info->interface = FLASH_CFI_X16;
- return 1;
-}
diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h
deleted file mode 100644
index c585c8e..0000000
--- a/board/mpl/vcma9/vcma9.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * (C) Copyright 2002, 2003
- * David Mueller, ELSOFT AG, d.mueller at elsoft.ch
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
- /****************************************************************************
- * Global routines used for VCMA9
- *****************************************************************************/
-
-#include <asm/arch/s3c24x0_cpu.h>
-
-extern void vcma9_print_info(void);
-extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag,
- int argc, char *const argv[]);
-
-/* VCMA9 PLD registers */
-enum vcma9_pld_regs {
- VCMA9_PLD_ID,
- VCMA9_PLD_NIC,
- VCMA9_PLD_CAN,
- VCMA9_PLD_MISC,
- VCMA9_PLD_GPCD,
- VCMA9_PLD_BOARD,
- VCMA9_PLD_SDRAM
-};
-
-#define VCMA9_PLD_BASE (0x2C000100)
diff --git a/configs/VCMA9_defconfig b/configs/VCMA9_defconfig
deleted file mode 100644
index e464c21..0000000
--- a/configs/VCMA9_defconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_VCMA9=y
-CONFIG_IDENT_STRING="\n(c) 2003 - 2011 by MPL AG Switzerland, MEV-10080-001 unstable"
-CONFIG_BOOTDELAY=5
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="VCMA9 # "
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_UBI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_KEYBOARD=y
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
deleted file mode 100644
index bb26261..0000000
--- a/include/configs/VCMA9.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * (C) Copyright 2002, 2003
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- * Gary Jennejohn <garyj at denx.de>
- * David Mueller <d.mueller at elsoft.ch>
- *
- * Configuation settings for the MPL VCMA9 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define MACH_TYPE_MPL_VCMA9 227
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_THUMB_BUILD
-
-#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */
-#define CONFIG_VCMA9 /* on a MPL VCMA9 Board */
-#define CONFIG_MACH_TYPE MACH_TYPE_MPL_VCMA9 /* Machine type */
-
-#define CONFIG_SYS_TEXT_BASE 0x0
-
-#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
-
-/* input clock of PLL (VCMA9 has 12MHz input clock) */
-#define CONFIG_SYS_CLK_FREQ 12000000
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_NAND
-
-#define CONFIG_BOARD_LATE_INIT
-
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * I2C stuff:
- * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
- * address 0x50 with 16bit addressing
- */
-#define CONFIG_SYS_I2C
-
-/* we use the built-in I2C controller */
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* I2C speed */
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x7F /* I2C slave addr */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-/* use EEPROM for environment vars */
-#define CONFIG_ENV_IS_IN_EEPROM 1
-/* environment starts at offset 0 */
-#define CONFIG_ENV_OFFSET 0x000
-/* 2KB should be more than enough */
-#define CONFIG_ENV_SIZE 0x800
-
-#undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-/* 64 bytes page write mode on 24C256 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/*
- * Hardware drivers
- */
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x20000300
-#define CONFIG_CS8900_BUS16
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on VCMA9 */
-
-/* USB support (currently only works with D-cache off) */
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_OHCI_S3C24XX
-#define CONFIG_DOS_PARTITION
-
-/* Enable needed helper functions */
-
-/* RTC */
-#define CONFIG_RTC_S3C24X0
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_BOOT_RETRY_TIME -1
-#define CONFIG_RESET_TO_RETRY
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.0.0.110
-#define CONFIG_SERVERIP 10.0.0.1
-
-#if defined(CONFIG_CMD_KGDB)
-/* speed to run kgdb serial port */
-#define CONFIG_KGDB_BAUDRATE 115200
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x31FFFFFF /* 32 MB in DRAM */
-
-#define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_SYS_LOAD_ADDR 0x30800000
-
-/* we configure PWM Timer 4 to 1ms 1000Hz */
-
-/* support additional compression methods */
-#define CONFIG_BZIP2
-#define CONFIG_LZO
-#define CONFIG_LZMA
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/* FLASH and environment organization */
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-#define CONFIG_FLASH_SHOW_PROGRESS 45
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_SECT (19)
-
-/*
- * Size of malloc() pool
- * BZIP2 / LZO / LZMA need a lot of RAM
- */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
-/* NAND configuration */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_S3C2410
-#define CONFIG_SYS_S3C2410_NAND_HWECC
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x4E000000
-#define CONFIG_S3C24XX_CUSTOM_NAND_TIMING
-#define CONFIG_S3C24XX_TACLS 1
-#define CONFIG_S3C24XX_TWRPH0 5
-#define CONFIG_S3C24XX_TWRPH1 3
-#endif
-
-#define MULTI_PURPOSE_SOCKET_ADDR 0x08000000
-
-/* File system */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_JFFS2
-#define CONFIG_YAFFS2
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_LZO
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#endif /* __CONFIG_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index a573210..208c6e4 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -8229,7 +8229,6 @@ CONFIG_U_QE
CONFIG_V38B
CONFIG_VAL
CONFIG_VAR_SIZE_SPL
-CONFIG_VCMA9
CONFIG_VCO_HZ
CONFIG_VCO_MULT
CONFIG_VCT_NOR
--
2.8.0.rc3.226.g39d4020
More information about the U-Boot
mailing list