[U-Boot] [PATCH v2 3/4] mmc: zynq: Determine base clock frequency via clock framework

[Stefan Herbrechtsmeier]

The zynq_sdhci controller driver use CONFIG_ZYNQ_SDHCI_MAX_FREQ as base
clock frequency but this clock is not fixed and depends on the hardware
configuration. Additionally the value of CONFIG_ZYNQ_SDHCI_MAX_FREQ
doesn't match the real base clock frequency of SDIO_FREQ. Use the clock
framework to determine the frequency at run time.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.de>

---

Changes in v2:
- Remove unused index from get sdio clock function
- Introduce common get clock function

 arch/arm/mach-zynq/clk.c              | 50 ++++++++++++++++++++++++++++-------
 arch/arm/mach-zynq/include/mach/clk.h |  1 +
 drivers/mmc/zynq_sdhci.c              | 33 +++++++++++++++++++++--
 3 files changed, 72 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c
index e256b58..8df2de2 100644
--- a/arch/arm/mach-zynq/clk.c
+++ b/arch/arm/mach-zynq/clk.c
@@ -550,20 +550,26 @@ void zynq_clk_early_init(void)
 }
 
 /**
- * get_uart_clk() - Get UART input frequency
- * Returns UART input clock frequency in Hz.
+ * zynq_clk_get_early() - Get zynq clock frequency early
+ * Returns clock frequency in Hz.
  *
  * Compared to zynq_clk_get_rate() this function is designed to work before
- * relocation and can be called when the serial UART is set up.
+ * relocation and can be called when the peripheral is set up.
  */
-unsigned long get_uart_clk(void)
+unsigned long zynq_clk_get_early(u32 *addr)
 {
-	u32 reg = readl(&slcr_base->uart_clk_ctrl);
-	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
-	enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel);
-	u32 *pllreg = clkid_2_register(parent);
-	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
+	u32 reg, div, srcsel;
+	enum zynq_clk parent;
+	u32 *pllreg;
+	unsigned long prate;
+
+	reg = readl(addr);
+	div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+
+	parent = __zynq_clk_periph_get_parent(srcsel);
+	pllreg = clkid_2_register(parent);
+	prate = __zynq_clk_pll_get_rate(pllreg);
 
 	if (!div)
 		div = 1;
@@ -572,6 +578,30 @@ unsigned long get_uart_clk(void)
 }
 
 /**
+ * get_uart_clk() - Get UART input frequency
+ * Returns UART input clock frequency in Hz.
+ *
+ * Compared to zynq_clk_get_rate() this function is designed to work before
+ * relocation and can be called when the serial UART is set up.
+ */
+unsigned long get_uart_clk(void)
+{
+	return zynq_clk_get_early(&slcr_base->uart_clk_ctrl);
+}
+
+/**
+ * get_sdio_clk() - Get SDIO input frequency
+ * Returns SDIO input clock frequency in Hz.
+ *
+ * Compared to zynq_clk_get_rate() this function is designed to work before
+ * relocation and can be called when the SDIO is set up.
+ */
+unsigned long get_sdio_clk(void)
+{
+	return zynq_clk_get_early(&slcr_base->sdio_clk_ctrl);
+}
+
+/**
  * set_cpu_clk_info() - Initialize clock framework
  * Always returns zero.
  *
diff --git a/arch/arm/mach-zynq/include/mach/clk.h b/arch/arm/mach-zynq/include/mach/clk.h
index ba2210d..bed4903 100644
--- a/arch/arm/mach-zynq/include/mach/clk.h
+++ b/arch/arm/mach-zynq/include/mach/clk.h
@@ -25,5 +25,6 @@ int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate);
 unsigned long zynq_clk_get_rate(enum zynq_clk clk);
 const char *zynq_clk_get_name(enum zynq_clk clk);
 unsigned long get_uart_clk(void);
+unsigned long get_sdio_clk(void);
 
 #endif
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 69efa38..26bd1be 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -6,6 +6,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <clk.h>
 #include <common.h>
 #include <dm.h>
 #include <fdtdec.h>
@@ -13,6 +14,8 @@
 #include <malloc.h>
 #include <sdhci.h>
 
+#include <asm/arch/clk.h>
+
 #ifndef CONFIG_ZYNQ_SDHCI_MIN_FREQ
 # define CONFIG_ZYNQ_SDHCI_MIN_FREQ	0
 #endif
@@ -27,8 +30,34 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
 	struct sdhci_host *host = dev_get_priv(dev);
+	unsigned long clock;
 	int ret;
 
+#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK)
+	struct clk clk;
+
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to get clock\n");
+		return ret;
+	}
+
+	clock = clk_get_rate(&clk);
+	if (IS_ERR_VALUE(clock)) {
+		dev_err(dev, "failed to get rate\n");
+		return clock;
+	}
+	debug("%s: CLK %ld\n", __func__, clock);
+
+	ret = clk_enable(&clk);
+	if (ret && ret != -ENOSYS) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+#else
+	clock = get_sdio_clk();
+#endif
+
 	host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
 		       SDHCI_QUIRK_BROKEN_R1B;
 
@@ -36,9 +65,9 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
 #endif
 
-	host->max_clk = CONFIG_ZYNQ_SDHCI_MAX_FREQ;
+	host->max_clk = clock;
 
-	ret = sdhci_setup_cfg(&plat->cfg, host, 0,
+	ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ZYNQ_SDHCI_MAX_FREQ,
 			      CONFIG_ZYNQ_SDHCI_MIN_FREQ);
 	host->mmc = &plat->mmc;
 	if (ret)
-- 
2.7.4



Kommanditgesellschaft - Sitz: Detmold - Amtsgericht Lemgo HRA 2790 - 
Komplementärin: Weidmüller Interface Führungsgesellschaft mbH - 
Sitz: Detmold - Amtsgericht Lemgo HRB 3924; 
Geschäftsführer: José Carlos Álvarez Tobar, Elke Eckstein, Dr. Peter Köhler, Jörg Timmermann;
USt-ID-Nr. DE124599660