[U-Boot] [PATCH v3 10/10] RFC: Use binman for an x86 board

Simon Glass sjg at chromium.org
Wed Oct 5 02:25:40 CEST 2016


Add an example usage of binman for an x86 board. This involves adding the
image definition to the device tree and using it in the Makefile. The
existing ifdtool features are no-longer needed.

This is for example only. Note that the binman.dtsi file is common and
could be used for all x86 boards. However, FSP support is missing.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v3:
- Put the binman definition in u-boot.dtsi

Changes in v2:
- Add automated test coverage
- Various changes and improvements based on using this tool for a while
- Put the binman definition in a common file for x86

 Makefile                 | 45 +++--------------------------------
 arch/x86/dts/u-boot.dtsi | 62 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 65 insertions(+), 42 deletions(-)
 create mode 100644 arch/x86/dts/u-boot.dtsi

diff --git a/Makefile b/Makefile
index 31c9483..64aab44 100644
--- a/Makefile
+++ b/Makefile
@@ -1060,50 +1060,11 @@ endif
 
 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
-# the middle.
+# the middle. This is handled by binman based on an image description in the
+# board's device tree.
 ifneq ($(CONFIG_X86_RESET_VECTOR),)
 rom: u-boot.rom FORCE
 
-IFDTOOL=$(objtree)/tools/ifdtool
-IFDTOOL_FLAGS  = -f 0:$(objtree)/u-boot.dtb
-IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
-IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
-IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
-IFDTOOL_FLAGS += -C
-
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-IFDTOOL_ME_FLAGS  = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
-IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
-endif
-
-ifneq ($(CONFIG_HAVE_MRC),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
-endif
-
-ifneq ($(CONFIG_HAVE_FSP),)
-IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_CMC),)
-IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_VGA_BIOS),)
-IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_REFCODE),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin
-endif
-
-quiet_cmd_ifdtool = IFDTOOL $@
-cmd_ifdtool  = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
-endif
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
-cmd_ifdtool += mv u-boot.tmp $@
-
 refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
 	$(call if_changed,copy)
 
@@ -1113,7 +1074,7 @@ cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
 
 u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
 		$(if $(CONFIG_HAVE_REFCODE),refcode.bin)
-	$(call if_changed,ifdtool)
+	$(call if_changed,binman)
 
 OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
 u-boot-x86-16bit.bin: u-boot FORCE
diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi
new file mode 100644
index 0000000..724913f
--- /dev/null
+++ b/arch/x86/dts/u-boot.dtsi
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2016 Google, Inc
+ * Written by Simon Glass <sjg at chromium.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_ROM_SIZE
+/ {
+	binman {
+		filename = "u-boot.rom";
+		end-at-4gb;
+		sort-by-pos;
+		pad-byte = <0xff>;
+		size = <CONFIG_ROM_SIZE>;
+#ifdef CONFIG_HAVE_INTEL_ME
+		intel-descriptor {
+		};
+		intel-me {
+		};
+#endif
+		u-boot-with-ucode-ptr {
+			pos = <CONFIG_SYS_TEXT_BASE>;
+		};
+		u-boot-dtb-with-ucode {
+		};
+		u-boot-ucode {
+			align = <16>;
+		};
+#ifdef CONFIG_HAVE_MRC
+		intel-mrc {
+			pos = <CONFIG_X86_MRC_ADDR>;
+		};
+#endif
+#ifdef CONFIG_HAVE_FSP
+		intel-fsp {
+			pos = <CONFIG_FSP_ADDR>;
+		};
+#endif
+#ifdef CONFIG_HAVE_CMC
+		intel-cmc {
+			pos = <CONFIG_CMC_ADDR>;
+		};
+#endif
+#ifdef CONFIG_HAVE_VGA_BIOS
+		intel-vga {
+			pos = <CONFIG_VGA_BIOS_ADDR>;
+		};
+#endif
+#ifdef CONFIG_HAVE_REFCODE
+		intel-refcode {
+			pos = <CONFIG_X86_REFCODE_ADDR>;
+		};
+#endif
+		x86-start16 {
+			pos = <CONFIG_SYS_X86_START16>;
+		};
+	};
+};
+#endif
-- 
2.8.0.rc3.226.g39d4020



More information about the U-Boot mailing list