[U-Boot] [PATCH v2 6/8] arm: Move SYS_FSL_SRDS_* and SYS_HAS_SERDES to Kconfig
York Sun
york.sun at nxp.com
Wed Oct 5 03:01:34 CEST 2016
Move these options to Kconfig and clean up existing uses.
Signed-off-by: York Sun <york.sun at nxp.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
arch/arm/cpu/armv7/ls102xa/Kconfig | 11 +++++++++++
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 16 ++++++++++++++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 5 -----
arch/arm/include/asm/arch-ls102xa/config.h | 2 --
include/configs/ls1012a_common.h | 2 --
include/configs/ls1021aqds.h | 2 --
include/configs/ls1021atwr.h | 2 --
include/configs/ls1043a_common.h | 3 ---
include/configs/ls1043aqds.h | 2 --
include/configs/ls1046a_common.h | 3 ---
include/configs/ls1046aqds.h | 2 --
include/configs/ls2080a_common.h | 3 ---
12 files changed, 27 insertions(+), 26 deletions(-)
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 88983f4..17f1975 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -1,6 +1,8 @@
config ARCH_LS1021A
bool
select SYS_FSL_ERRATUM_A010315
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
menu "LS102xA architecture"
depends on ARCH_LS1021A
@@ -23,6 +25,15 @@ config MAX_CPUS
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
+config SYS_FSL_SRDS_1
+ bool
+
+config SYS_FSL_SRDS_2
+ bool
+
+config SYS_HAS_SERDES
+ bool
+
config SYS_FSL_IFC_BANK_COUNT
int "Maximum banks of Integrated flash controller"
depends on ARCH_LS1021A
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index f683a14..66e509e 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -12,16 +12,23 @@ config ARCH_LS1043A
config ARCH_LS1046A
bool
select FSL_LSCH2
+ select SYS_FSL_SRDS_2
config ARCH_LS2080A
bool
select FSL_LSCH3
+ select SYS_FSL_HAS_DP_DDR
+ select SYS_FSL_SRDS_2
config FSL_LSCH2
bool
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
config FSL_LSCH3
bool
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
menu "Layerscape architecture"
depends on FSL_LSCH2 || FSL_LSCH3
@@ -60,4 +67,13 @@ config SYS_FSL_IFC_BANK_COUNT
config SYS_FSL_HAS_DP_DDR
bool
+config SYS_FSL_SRDS_1
+ bool
+
+config SYS_FSL_SRDS_2
+ bool
+
+config SYS_HAS_SERDES
+ bool
+
endmenu
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 6ee75cb..3039e72 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -32,8 +32,6 @@
#ifdef CONFIG_LS2080A
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 }
#define SRDS_MAX_LANES 8
-#define CONFIG_SYS_FSL_SRDS_1
-#define CONFIG_SYS_FSL_SRDS_2
#define CONFIG_SYS_PAGE_SIZE 0x10000
#ifndef L1_CACHE_BYTES
#define L1_CACHE_SHIFT 6
@@ -162,8 +160,6 @@
#define CONFIG_SYS_FSL_PEX_LUT_BE
#define CONFIG_SYS_FSL_SEC_BE
-#define CONFIG_SYS_FSL_SRDS_1
-
/* SoC related */
#ifdef CONFIG_LS1043A
#define CONFIG_SYS_FMAN_V3
@@ -212,7 +208,6 @@
#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE
-#define CONFIG_SYS_FSL_SRDS_2
#define CONFIG_SYS_FSL_IFC_BE
#define CONFIG_SYS_FSL_SFP_VER_3_2
#define CONFIG_SYS_FSL_SNVS_LE
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 70cc703..dfcb546 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -120,8 +120,6 @@
#define DCU_LAYER_MAX_NUM 16
-#define CONFIG_SYS_FSL_SRDS_1
-
#ifdef CONFIG_LS102XA
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
#define CONFIG_NUM_DDR_CONTROLLERS 1
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 1056755..ced8ead 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -10,8 +10,6 @@
#define CONFIG_FSL_LAYERSCAPE
#define CONFIG_GICV2
-#define CONFIG_SYS_HAS_SERDES
-
#include <asm/arch/config.h>
#define CONFIG_SYS_NO_FLASH
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 0d72e69..5ff3db6 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -143,8 +143,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#endif
-#define CONFIG_SYS_HAS_SERDES
-
#define CONFIG_FSL_CAAM /* Enable CAAM */
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index e5ac50e..67b43c6 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -170,8 +170,6 @@
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_HAS_SERDES
-
#define CONFIG_FSL_CAAM /* Enable CAAM */
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index ac86c08..3a85b6a 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -15,9 +15,6 @@
#define CONFIG_GICV2
#include <asm/arch/config.h>
-#ifdef CONFIG_SYS_FSL_SRDS_1
-#define CONFIG_SYS_HAS_SERDES
-#endif
/* Link Definitions */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index a80e33d..b18fcc0 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -52,8 +52,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#endif
-#define CONFIG_SYS_HAS_SERDES
-
#ifdef CONFIG_SYS_DPAA_FMAN
#define CONFIG_FMAN_ENET
#define CONFIG_PHYLIB
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index ec6c908..c4bbd56 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -14,9 +14,6 @@
#define CONFIG_GICV2
#include <asm/arch/config.h>
-#ifdef CONFIG_SYS_FSL_SRDS_1
-#define CONFIG_SYS_HAS_SERDES
-#endif
/* Link Definitions */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 2e5c2f1..d1adf3f 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -49,8 +49,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#endif
-#define CONFIG_SYS_HAS_SERDES
-
/* DSPI */
#ifdef CONFIG_FSL_DSPI
#define CONFIG_SPI_FLASH_STMICRO /* cs0 */
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index d9eea09..187aee1 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -15,9 +15,6 @@
#include <asm/arch/ls2080a_stream_id.h>
#include <asm/arch/config.h>
-#if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2))
-#define CONFIG_SYS_HAS_SERDES
-#endif
/* Link Definitions */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
--
2.7.4
More information about the U-Boot
mailing list