[U-Boot] [PATCH v2] power: regulator: Add support for gpio regulators

[Przemyslaw Marczak]

Hello,

On 10/05/2016 06:50 PM, Simon Glass wrote:
> Hi Keerthy,
>
> On 5 October 2016 at 05:58, Keerthy <a0393675 at ti.com> wrote:
>>
>> On Monday 19 September 2016 06:29 AM, Simon Glass wrote:
>>> On 15 September 2016 at 05:34, Keerthy <j-keerthy at ti.com> wrote:
>>>> Add support for gpio regulators. As of now this driver caters
>>>> to gpio regulators with one gpio. Supports setting voltage values to gpio
>>>> regulators and retrieving the values.
>>>>
>>>> Signed-off-by: Keerthy <j-keerthy at ti.com>
>>>> ---
>>>>
>>>> Changes in v2:
>>>>
>>>>    * Added states and voltages as part of plat data to have
>>>>      a generic state to voltage mapping removing any assumptions.
>>>>
>>>>   drivers/power/regulator/Kconfig          |   8 ++
>>>>   drivers/power/regulator/Makefile         |   1 +
>>>>   drivers/power/regulator/gpio-regulator.c | 137
>>>> +++++++++++++++++++++++++++++++
>>>>   include/power/regulator.h                |   1 +
>>>>   4 files changed, 147 insertions(+)
>>>>   create mode 100644 drivers/power/regulator/gpio-regulator.c
>>>
>>> Reviewed-by: Simon Glass <sjg at chromium.org>
>>
>> Simon,
>>
>> Wanted to know who is pulling this patch.
> Looking in patchwork it is assigned to Przemyslaw.
>
> Regards,
> Simon
>
>
>

I'm sorry for the silence, I have very limited time for open source at 
present, and now it's hard for me to watch the list.
Simon, I will assign it to you in patchwork, since you have already done 
the review.

Best regards,

-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com