[U-Boot] [PATCH v2] power: regulator: Add support for gpio regulators

[Simon Glass]

On 6 October 2016 at 08:28, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
> Hello,
>
>
> On 10/05/2016 06:50 PM, Simon Glass wrote:
>>
>> Hi Keerthy,
>>
>> On 5 October 2016 at 05:58, Keerthy <a0393675 at ti.com> wrote:
>>>
>>>
>>> On Monday 19 September 2016 06:29 AM, Simon Glass wrote:
>>>>
>>>> On 15 September 2016 at 05:34, Keerthy <j-keerthy at ti.com> wrote:
>>>>>
>>>>> Add support for gpio regulators. As of now this driver caters
>>>>> to gpio regulators with one gpio. Supports setting voltage values to
>>>>> gpio
>>>>> regulators and retrieving the values.
>>>>>
>>>>> Signed-off-by: Keerthy <j-keerthy at ti.com>
>>>>> ---
>>>>>
>>>>> Changes in v2:
>>>>>
>>>>>    * Added states and voltages as part of plat data to have
>>>>>      a generic state to voltage mapping removing any assumptions.
>>>>>
>>>>>   drivers/power/regulator/Kconfig          |   8 ++
>>>>>   drivers/power/regulator/Makefile         |   1 +
>>>>>   drivers/power/regulator/gpio-regulator.c | 137
>>>>> +++++++++++++++++++++++++++++++
>>>>>   include/power/regulator.h                |   1 +
>>>>>   4 files changed, 147 insertions(+)
>>>>>   create mode 100644 drivers/power/regulator/gpio-regulator.c
>>>>
>>>>
>>>> Reviewed-by: Simon Glass <sjg at chromium.org>
>>>
>>>
>>> Simon,
>>>
>>> Wanted to know who is pulling this patch.
>>
>> Looking in patchwork it is assigned to Przemyslaw.
>>
>> Regards,
>> Simon
>>
>>
>>
>
> I'm sorry for the silence, I have very limited time for open source at
> present, and now it's hard for me to watch the list.
> Simon, I will assign it to you in patchwork, since you have already done the
> review.

Applied to u-boot-dm, thanks!