[U-Boot] [PicoZed] Error in NET and SD Card

[Jaehoon Chung]

On 10/12/2016 05:36 PM, Oscar Gomez Fuente wrote:
> Hi Jaehoon,
> 
> 
> How can I enable the CONFG_MMC_TRACE? I couldn't find this option in the menuconfig.
> 
> Is it enough to add "CONFIG_MMC_TRACE=y" in the .config file?

Yes..CONFIG_MMC_TRACE=y or add the CONFIG_MMC_TRACE in your config file.

Best Regards,
Jaehoon Chung

> 
> 
> Best regards.
> 
> Oscar Gomez Fuente.
> 
> On 12 October 2016 at 06:46, Jaehoon Chung <jh80.chung at samsung.com <mailto:jh80.chung at samsung.com>> wrote:
> 
>     Hi
> 
>     On 10/11/2016 11:08 PM, Oscar Gomez Fuente wrote:
>     > Hi everyone,
>     >
>     > I've just compiled u-boot for a picoZed platform with
>     > the zynq_picozed_defconfig, and I've realised that the NET and SD Card
>     > aren't recognised. In the init I see these messages:
>     >
>     > I boot from the SD Card and I see these messages from my uart terminal:
>     >
>     > ---------------------
>     > U-Boot 2016.11-rc1-00139-gf5fd45f (Oct 11 2016 - 15:48:54 +0200)
>     >
>     > Model: Zynq PicoZed Board
>     > Board: Xilinx Zynq
>     > DRAM:  ECC disabled 1 GiB
>     > MMC:
>     > Using default environment
>     >
>     > In:    serial at e0001000
>     > Out:   serial at e0001000
>     > Err:   serial at e0001000
>     > Model: Zynq PicoZed Board
>     > Board: Xilinx Zynq
>     > Net:   No ethernet found.
>     > ** Bad device mmc 0 **
>     > Checking if uenvcmd is set ...
>     > Hit any key to stop autoboot:  0
>     > ---------------------
>     >
>     > So, I think something has broken. Could anyone chek this issue?
> 
>     Could you enable the CONFIG_MMC_TRACE? then we can see more information.
>     And which config do you use?
> 
>     Best Regards,
>     Jaehoon Chung
> 
>     >
>     >
>     > Thank you very much. Best regards.
>     >
>     > Oscar Gomez Fuente
>     > _______________________________________________
>     > U-Boot mailing list
>     > U-Boot at lists.denx.de <mailto:U-Boot at lists.denx.de>
>     > http://lists.denx.de/mailman/listinfo/u-boot <http://lists.denx.de/mailman/listinfo/u-boot>
>     >
>     >
>     >
> 
>