[U-Boot] [PATCH] spi: kirkwood_spi: implement mvebu_spi_set_mode()

[Chris Packham]

Set the appropriate bits in the interface config register based
on the SPI_ mode flags.

Signed-off-by: Chris Packham <judge.packham at gmail.com>
---

 arch/arm/include/asm/arch-mvebu/spi.h |  4 ++++
 drivers/spi/kirkwood_spi.c            | 13 +++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/arch/arm/include/asm/arch-mvebu/spi.h b/arch/arm/include/asm/arch-mvebu/spi.h
index 78869a253d1f..3545aed17347 100644
--- a/arch/arm/include/asm/arch-mvebu/spi.h
+++ b/arch/arm/include/asm/arch-mvebu/spi.h
@@ -52,6 +52,10 @@ struct kwspi_registers {
 #define KWSPI_ADRLEN_3BYTE	(2 << 8)
 #define KWSPI_ADRLEN_4BYTE	(3 << 8)
 #define KWSPI_ADRLEN_MASK	(3 << 8)
+#define KWSPI_CPOL		(1 << 11)
+#define KWSPI_CPHA		(1 << 12)
+#define KWSPI_TXLSBF		(1 << 13)
+#define KWSPI_RXLSBF		(1 << 14)
 
 #define KWSPI_IRQUNMASK		1 /* unmask SPI interrupt */
 #define KWSPI_IRQMASK		0 /* mask SPI interrupt */
diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
index 6851ba942f51..69a0be9ea5b2 100644
--- a/drivers/spi/kirkwood_spi.c
+++ b/drivers/spi/kirkwood_spi.c
@@ -271,6 +271,19 @@ static int mvebu_spi_set_speed(struct udevice *bus, uint hz)
 
 static int mvebu_spi_set_mode(struct udevice *bus, uint mode)
 {
+	struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
+	struct kwspi_registers *reg = plat->spireg;
+	u32 data = readl(&reg->cfg);
+
+	if (mode & SPI_CPHA)
+		data |= KWSPI_CPHA;
+	if (mode & SPI_CPOL)
+		data |= KWSPI_CPOL;
+	if (mode & SPI_LSB_FIRST)
+		data |= (KWSPI_RXLSBF | KWSPI_TXLSBF);
+
+	writel(data, &reg->cfg);
+
 	return 0;
 }
 
-- 
2.10.0.479.g7c56b16