[U-Boot] [U-Boot, v2, 3/4] board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC

[Andreas Bießmann]

Hi Wenyou,

On Tue, Sep 13, 2016 at 10:49:04AM +0800, Wenyou Yang wrote:
> If 'ethaddr' is not set, we will get the ethernet address from AT24MAC,
> and set it to 'ethaddr' variable.
> 
> Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
> Signed-off-by: Songjun Wu <songjun.wu at microchip.com>
> Reviewed-by: Andreas Bießmann <andreas at biessmann.org>
> ---
> 
> Changes in v2: None
> 
>  board/atmel/sama5d2_xplained/sama5d2_xplained.c | 51 +++++++++++++++++++++++++
>  include/configs/sama5d2_xplained.h              |  6 +++
>  2 files changed, 57 insertions(+)
> 

<snip>

> diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
> index 77757a3..cada04f 100644
> --- a/include/configs/sama5d2_xplained.h
> +++ b/include/configs/sama5d2_xplained.h
> @@ -15,6 +15,8 @@
>  
>  #include "at91-sama5_common.h"
>  
> +#define CONFIG_MISC_INIT_R
> +
>  /* SDRAM */
>  #define CONFIG_NR_DRAM_BANKS		1
>  #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
> @@ -54,6 +56,10 @@
>  #define CONFIG_DOS_PARTITION
>  #endif
>  
> +/* I2C */
> +#define CONFIG_AT24MAC_ADDR		0x5c
> +#define CONFIG_AT24MAC_REG		0x9a

these two configs produce compile warnings due to the lately introduced check
for new config options outside Kconfig.

Please resend with these two options moved to Kconfig of sama5d2_xplained
board.

Andreas

> +
>  /* Ethernet Hardware */
>  #define CONFIG_MACB
>  #define CONFIG_RMII