[U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC

[Stefano Babic]

On 07/10/2016 18:14, linux-kernel-dev at beckhoff.com wrote:
> From: Patrick Bruenn <p.bruenn at beckhoff.com>
> 
> Add CX9020 board based on mx53loco.
> Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
> serial_mxc with DTE and prepare for device tree migration of other
> functions and imx53 devices.
> 
> The CX9020 differs from i.MX53 Quick Start Board by:
> - use uart2 instead of uart1
> - DVI-D connector instead of VGA
> - no audio
> - CCAT FPGA connected to emi
> - enable rtc
> 
> Signed-off-by: Patrick Bruenn <p.bruenn at beckhoff.com>
> 
> ---

> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define CONFIG_MX53
> +
> +#define CONFIG_DISPLAY_BOARDINFO
> +

This results to be defined twice (default is enabled, resulting in a
warning by building the board. If you agree, I fix it myself before
applying.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================