[U-Boot] [PATCH 2/2] sunxi: A64: enable USB support
Andre Przywara
andre.przywara at arm.com
Fri Oct 21 03:24:30 CEST 2016
From: Amit Singh Tomar <amittomer25 at gmail.com>
Mostly by adding MACH_SUN50I to some existing #ifdefs enable support
for the the HCI0 USB host controller on the A64.
Fix up some minor 64-bit hiccups on the way.
Add the bare minimum DT bits to the A64 .dtsi and enable the controllers
and the PHY on the Pine64.
This is limited to the first USB controller at the moment, which is
connected to the lower USB socket on the Pine64 board.
[Andre: remove unneeded defines, enable OHCI, add commit message]
Signed-off-by: Amit Singh Tomar <amittomer25 at gmail.com>
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
arch/arm/dts/sun50i-a64-pine64-common.dtsi | 12 ++++++++++++
arch/arm/dts/sun50i-a64.dtsi | 29 +++++++++++++++++++++++++++++
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 2 +-
arch/arm/mach-sunxi/usb_phy.c | 5 +++--
configs/pine64_plus_defconfig | 1 +
drivers/usb/host/ehci-sunxi.c | 7 ++++---
drivers/usb/host/ohci-sunxi.c | 1 +
include/configs/sun50i.h | 5 +++++
8 files changed, 56 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/sun50i-a64-pine64-common.dtsi b/arch/arm/dts/sun50i-a64-pine64-common.dtsi
index c0fde44..9ec81c6 100644
--- a/arch/arm/dts/sun50i-a64-pine64-common.dtsi
+++ b/arch/arm/dts/sun50i-a64-pine64-common.dtsi
@@ -79,3 +79,15 @@
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
+
+&usbphy {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
index 7d0dc76..bef0d00 100644
--- a/arch/arm/dts/sun50i-a64.dtsi
+++ b/arch/arm/dts/sun50i-a64.dtsi
@@ -653,5 +653,34 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ usbphy: phy at 1c1b810 {
+ compatible = "allwinner,sun50i-a64-usb-phy",
+ "allwinner,sun8i-a33-usb-phy";
+ reg = <0x01c1b810 0x14>, <0x01c1b800 0x4>;
+ reg-names = "phy_ctrl", "pmu1";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci1: usb at 01c1b000 {
+ compatible = "allwinner,sun50i-a64-ehci",
+ "generic-ehci";
+ reg = <0x01c1b000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb at 01c1b400 {
+ compatible = "allwinner,sun50i-a64-ohci",
+ "generic-ohci";
+ reg = <0x01c1b400 0x100>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "enabled";
+ };
};
};
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index 5f93830..7232f6d 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -56,7 +56,7 @@
#define SUNXI_USB2_BASE 0x01c1c000
#endif
#ifdef CONFIG_SUNXI_GEN_SUN6I
-#ifdef CONFIG_MACH_SUN8I_H3
+#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
#define SUNXI_USBPHY_BASE 0x01c19000
#define SUNXI_USB0_BASE 0x01c1a000
#define SUNXI_USB1_BASE 0x01c1b000
diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c
index bd1bbee..278587b 100644
--- a/arch/arm/mach-sunxi/usb_phy.c
+++ b/arch/arm/mach-sunxi/usb_phy.c
@@ -146,12 +146,13 @@ __maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
}
}
-#if defined CONFIG_MACH_SUN8I_H3
+#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
{
+#if defined CONFIG_MACH_SUN8I_H3
if (phy->id == 0)
clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
-
+#endif
clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02);
}
#elif defined CONFIG_MACH_SUN8I_A83T
diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig
index 6f82190..bd3e2e6 100644
--- a/configs/pine64_plus_defconfig
+++ b/configs/pine64_plus_defconfig
@@ -10,3 +10,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index f2d83e3..5bb97ff 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -45,10 +45,10 @@ static int ehci_usb_probe(struct udevice *dev)
* clocks resp. phys.
*/
priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
-#ifdef CONFIG_MACH_SUN8I_H3
+#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
#endif
- priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / BASE_DIST;
+ priv->phy_index = ((uintptr_t)hccr - SUNXI_USB1_BASE) / BASE_DIST;
priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
extra_ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
priv->phy_index++; /* Non otg phys start at 1 */
@@ -63,7 +63,7 @@ static int ehci_usb_probe(struct udevice *dev)
sunxi_usb_phy_init(priv->phy_index);
sunxi_usb_phy_power_on(priv->phy_index);
- hcor = (struct ehci_hcor *)((uint32_t)hccr +
+ hcor = (struct ehci_hcor *)((uintptr_t)hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
return ehci_register(dev, hccr, hcor, NULL, 0, plat->init_type);
@@ -98,6 +98,7 @@ static const struct udevice_id ehci_usb_ids[] = {
{ .compatible = "allwinner,sun8i-a83t-ehci", },
{ .compatible = "allwinner,sun8i-h3-ehci", },
{ .compatible = "allwinner,sun9i-a80-ehci", },
+ { .compatible = "allwinner,sun50i-a64-ehci", },
{ }
};
diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c
index 0689374..0c45eec 100644
--- a/drivers/usb/host/ohci-sunxi.c
+++ b/drivers/usb/host/ohci-sunxi.c
@@ -101,6 +101,7 @@ static const struct udevice_id ohci_usb_ids[] = {
{ .compatible = "allwinner,sun8i-a83t-ohci", },
{ .compatible = "allwinner,sun8i-h3-ohci", },
{ .compatible = "allwinner,sun9i-a80-ohci", },
+ { .compatible = "allwinner,sun50i-a64-ohci", },
{ }
};
diff --git a/include/configs/sun50i.h b/include/configs/sun50i.h
index 0fdb4c7..3e5708b 100644
--- a/include/configs/sun50i.h
+++ b/include/configs/sun50i.h
@@ -11,6 +11,11 @@
* A64 specific configuration
*/
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_SUNXI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#endif
+
#define CONFIG_SUNXI_USB_PHYS 1
#define COUNTER_FREQUENCY CONFIG_TIMER_CLK_FREQ
--
2.8.2
More information about the U-Boot
mailing list