[U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support

[Jagan Teki]

On Mon, Oct 24, 2016 at 7:31 PM, Stefano Babic <sbabic at denx.de> wrote:
> On 24/10/2016 15:15, Jagan Teki wrote:
>> On Mon, Oct 24, 2016 at 6:04 PM, Stefano Babic <sbabic at denx.de> wrote:
>>> Hi Jagan,
>
>>>
>>> Please wait, I am confused. You have sent a complete V8, but as far as I
>>> understand the oinly changes are reported above (Patch 14/15).
>>>
>>> However, even if I have not tested, this would break bisecting, because
>>> patch 4/23 introduces the board and building with that commit leads to
>>> the error. So changes should be respective in patch 4 for mmc and patch
>>> 21 for NAND taking as reference V8.
>>
>> Yes, I've added 14/23 and 15/23 for new changes so the previous 14/21
>> becomes 16/23 now and the only missing one is 21/23. So I will update
>> this 21/23 for v9. Hope this make clear for you.
>
> It is ok if you feel better to send V9 - what I meant it is just that
> entries for CONFIG_DM_MM and CONFIG_DM_MMC_OPS should be done in the
> same patch where the defconfig is added to avoid breaking bisecting.

OK, then I will send the 14/23 with squash of 14/23 and 15/23 to 16/23
and 21/23 v9.
Does it fine?

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.