[U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support

[Jagan Teki]

Hi Stefano,

On Mon, Oct 24, 2016 at 7:51 PM, Jagan Teki <jagan at openedev.com> wrote:
> On Mon, Oct 24, 2016 at 7:31 PM, Stefano Babic <sbabic at denx.de> wrote:
>> On 24/10/2016 15:15, Jagan Teki wrote:
>>> On Mon, Oct 24, 2016 at 6:04 PM, Stefano Babic <sbabic at denx.de> wrote:
>>>> Hi Jagan,
>>
>>>>
>>>> Please wait, I am confused. You have sent a complete V8, but as far as I
>>>> understand the oinly changes are reported above (Patch 14/15).
>>>>
>>>> However, even if I have not tested, this would break bisecting, because
>>>> patch 4/23 introduces the board and building with that commit leads to
>>>> the error. So changes should be respective in patch 4 for mmc and patch
>>>> 21 for NAND taking as reference V8.
>>>
>>> Yes, I've added 14/23 and 15/23 for new changes so the previous 14/21
>>> becomes 16/23 now and the only missing one is 21/23. So I will update
>>> this 21/23 for v9. Hope this make clear for you.
>>
>> It is ok if you feel better to send V9 - what I meant it is just that
>> entries for CONFIG_DM_MM and CONFIG_DM_MMC_OPS should be done in the
>> same patch where the defconfig is added to avoid breaking bisecting.
>
> OK, then I will send the 14/23 with squash of 14/23 and 15/23 to 16/23
> and 21/23 v9.
> Does it fine?

Sent these two patches with v9, please let me know for any issues.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.