[U-Boot] [PATCH v9 21/23] imx6: icorem6: Add NAND support

[Jagan Teki]

On Wed, Oct 26, 2016 at 8:38 PM, Stefano Babic <sbabic at denx.de> wrote:
> Hi Jagan,
>
>
> On 25/10/2016 08:23, Jagan Teki wrote:
>> From: Jagan Teki <jagan at amarulasolutions.com>
>>
>> Add NAND support for Engicam i.CoreM6 qdl board.
>>
>> Boot Log:
>> --------
>>
>> U-Boot SPL 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43)
>> Trying to boot from NAND
>> NAND : 512 MiB
>>
>> U-Boot 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43 +0530)
>>
>> CPU:   Freescale i.MX6SOLO rev1.3 at 792MHz
>> CPU:   Industrial temperature grade (-40C to 105C) at 55C
>> Reset cause: WDOG
>> Model: Engicam i.CoreM6 DualLite/Solo Starter Kit
>> DRAM:  256 MiB
>> NAND:  512 MiB
>> MMC:   FSL_SDHC: 0
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   FEC [PRIME]
>> Hit any key to stop autoboot:  0
>> icorem6qdl>
>>
>> Cc: Scott Wood <oss at buserror.net>
>> Cc: Stefano Babic <sbabic at denx.de>
>> Cc: Peng Fan <peng.fan at nxp.com>
>> Cc: Matteo Lisi <matteo.lisi at engicam.com>
>> Cc: Michael Trimarchi <michael at amarulasolutions.com>
>> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>> ---
>> Changes for v9:
>> - Add below configs on defconfig
>>   # CONFIG_BLK is not set
>>   # CONFIG_DM_MMC_OPS is not set
>
> It was nice if it was set. But if you simply grep in this poathc, they
> are not.  Just changelog was touched.
>
> But let's see what we can do to improve. I have merged patches up to 14
> (without NAND support). I will push them to the server and they are part
> of my next PR.
>
> As I propose, I could fix this myself in this patch if you agree - or
> then please post the rest of patches, but after checking the board can
> be built.

I am OK, please fix from you side and also please apply this [1]
series as well, all Acked-by Jeo

[1] [PATCH v7 0/5] net: fec_mxc: Convert to DM

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.