[U-Boot] [PATCH v9 21/23] imx6: icorem6: Add NAND support

[Stefano Babic]

On 26/10/2016 18:35, Jagan Teki wrote:
> On Wed, Oct 26, 2016 at 8:38 PM, Stefano Babic <sbabic at denx.de> wrote:
>> Hi Jagan,
>>
>>
>> On 25/10/2016 08:23, Jagan Teki wrote:
>>> From: Jagan Teki <jagan at amarulasolutions.com>
>>>
>>> Add NAND support for Engicam i.CoreM6 qdl board.
>>>
>>> Boot Log:
>>> --------
>>>
>>> U-Boot SPL 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43)
>>> Trying to boot from NAND
>>> NAND : 512 MiB
>>>
>>> U-Boot 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43 +0530)
>>>
>>> CPU:   Freescale i.MX6SOLO rev1.3 at 792MHz
>>> CPU:   Industrial temperature grade (-40C to 105C) at 55C
>>> Reset cause: WDOG
>>> Model: Engicam i.CoreM6 DualLite/Solo Starter Kit
>>> DRAM:  256 MiB
>>> NAND:  512 MiB
>>> MMC:   FSL_SDHC: 0
>>> In:    serial
>>> Out:   serial
>>> Err:   serial
>>> Net:   FEC [PRIME]
>>> Hit any key to stop autoboot:  0
>>> icorem6qdl>
>>>
>>> Cc: Scott Wood <oss at buserror.net>
>>> Cc: Stefano Babic <sbabic at denx.de>
>>> Cc: Peng Fan <peng.fan at nxp.com>
>>> Cc: Matteo Lisi <matteo.lisi at engicam.com>
>>> Cc: Michael Trimarchi <michael at amarulasolutions.com>
>>> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>>> ---
>>> Changes for v9:
>>> - Add below configs on defconfig
>>>   # CONFIG_BLK is not set
>>>   # CONFIG_DM_MMC_OPS is not set
>>
>> It was nice if it was set. But if you simply grep in this poathc, they
>> are not.  Just changelog was touched.
>>
>> But let's see what we can do to improve. I have merged patches up to 14
>> (without NAND support). I will push them to the server and they are part
>> of my next PR.
>>
>> As I propose, I could fix this myself in this patch if you agree - or
>> then please post the rest of patches, but after checking the board can
>> be built.
> 
> I am OK, please fix from you side and also please apply this [1]
> series as well, all Acked-by Jeo

All series applied to u-boot-imx, thanks !

> 
> [1] [PATCH v7 0/5] net: fec_mxc: Convert to DM

This is the next...

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================