[U-Boot] [PATCH 07/11] ARM: uniphier: do not run harmful code for USB boot mode of LD11 ES3

[Masahiro Yamada]

The USB boot without the stand-by MPU is available on ES3 or later
of LD11 SoC, but the code in this if-conditional block must not be
run when booting from USB.  Check if the boot device is USB, and
skip the code in the case.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 arch/arm/mach-uniphier/clk/clk-ld11.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-uniphier/clk/clk-ld11.c b/arch/arm/mach-uniphier/clk/clk-ld11.c
index ca8737d..58069cb 100644
--- a/arch/arm/mach-uniphier/clk/clk-ld11.c
+++ b/arch/arm/mach-uniphier/clk/clk-ld11.c
@@ -5,18 +5,20 @@
  */
 
 #include <common.h>
+#include <spl.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
 
+#include "../boot-mode/boot-device.h"
 #include "../init.h"
 #include "../sc64-regs.h"
 #include "../sg-regs.h"
 
 void uniphier_ld11_clk_init(void)
 {
-	if (readl(SG_PINMON0) & BIT(27)) {
-		/* if booted without stand-by MPU */
-
+	/* if booted from a device other than USB, without stand-by MPU */
+	if ((readl(SG_PINMON0) & BIT(27)) &&
+	    spl_boot_device_raw() != BOOT_DEVICE_USB) {
 		writel(1, SG_ETPHYPSHUT);
 		writel(1, SG_ETPHYCNT);
 
-- 
1.9.1