[U-Boot] [PATCH v1 4/7] board: sama5d3_xplained: move config options to defconfig

[Wenyou Yang]

Enable CONFIG_CLK and CONFIG_PINCTRL to support at91 clock
driver and at91 pinctrl driver.

Move some config options to configs/sama5d3xek_*_defconfig.

Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
---

 configs/sama5d3_xplained_mmc_defconfig       | 21 ++++++++++++++++++++-
 configs/sama5d3_xplained_nandflash_defconfig | 21 ++++++++++++++++++++-
 include/configs/sama5d3_xplained.h           |  7 -------
 3 files changed, 40 insertions(+), 9 deletions(-)

diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig
index 4f4e51b..8940f16 100644
--- a/configs/sama5d3_xplained_mmc_defconfig
+++ b/configs/sama5d3_xplained_mmc_defconfig
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3
@@ -29,6 +30,24 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig
index e83d047..6020513 100644
--- a/configs/sama5d3_xplained_nandflash_defconfig
+++ b/configs/sama5d3_xplained_nandflash_defconfig
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
@@ -27,6 +28,24 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 5e661741..fe5d19a 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -15,11 +15,6 @@
 
 #include "at91-sama5_common.h"
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_DBGU
-
 /*
  * This needs to be defined for the OHCI code to work but it is defined as
  * ATMEL_ID_UHPHS in the CPU specific header files.
@@ -83,8 +78,6 @@
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_ATMEL_MCI_8BIT
 #endif
 
 /* USB */
-- 
2.7.4