[U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux
Jagan Teki
jagan at openedev.com
Mon Oct 31 09:54:28 CET 2016
On Mon, Oct 31, 2016 at 8:48 AM, Vignesh R <vigneshr at ti.com> wrote:
>
>
> On Sunday 30 October 2016 11:16 PM, Jagan Teki wrote:
> [...]
>> + {"S25FL128P_64K", INFO(0x012018, 0x0301, 64 * 1024, 256, RD_FULL | WR_QPP) },
>> + {"S25FL032P", INFO(0x010215, 0x4d00, 64 * 1024, 64, RD_FULL | WR_QPP) },
>> + {"S25FL064P", INFO(0x010216, 0x4d00, 64 * 1024, 128, RD_FULL | WR_QPP) },
>> + {"S25FL128S_256K", INFO(0x012018, 0x4d00, 256 * 1024, 64, RD_FULL | WR_QPP) },
>> + {"S25FL128S_64K", INFO(0x012018, 0x4d01, 64 * 1024, 256, RD_FULL | WR_QPP) },
>> + {"S25FL256S_256K", INFO(0x010219, 0x4d00, 256 * 1024, 128, RD_FULL | WR_QPP) },
>> + {"S25FL256S_64K", INFO(0x010219, 0x4d01, 64 * 1024, 512, RD_FULL | WR_QPP) },
>> + {"S25FS512S", INFO(0x010220, 0x4D00, 128 * 1024, 512, RD_FULL | WR_QPP) },
>> + {"S25FL512S_256K", INFO(0x010220, 0x4d00, 256 * 1024, 256, RD_FULL | WR_QPP) },
>
> Could you change above S25FS512S and S25FL512S_256K to use INFO6 macro?
> Right now, S25FL512S_256K gets detected as S25FS512S and sf update fails
> due as erasesizes are different.
I think this seems to be an existing issue, even before these changes.
after this [1] I will prepare a patch to use INFO6 for S25FS512S.
[1] http://git.denx.de/?p=u-boot-spi.git;a=commitdiff;h=13c17cad45ad9040fd0f6ebadf76554eb6353381
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the U-Boot
mailing list