[U-Boot] [PATCH v4 0/4] rk3399: enable dwc3 gadget and fastboot

[Kever Yang]

This patch set enable rk3399 dwc3 controller and gadget driver
for fastboot.


Changes in v4:
- parse DT for quirk, base address and maximum speed
- use 1 bit for usb2_phyif_utmi_width instead of 5bit

Changes in v3:
- remove utmi width DT parse from borad init
- Parse the DT for utmi+ interface width in dwc3 driver
- move the config into Kconfig file.

Changes in v2:
- parse dt for utmi width
- use a variable to identify utmi+ bus width instead of CONFIG MACRO
- remove config for USB2PHY UTMI BITS

Kever Yang (4):
  rk3399: add a empty "sys_proto.h" header file
  board: evb-rk3399: add api to support dwc3 gadget
  usb: dwc3: add support for 16 bit UTMI+ interface
  config: rk3399: add support for dwc3 gadget

 arch/arm/include/asm/arch-rockchip/sys_proto.h | 10 +++++
 board/rockchip/evb_rk3399/evb-rk3399.c         | 51 ++++++++++++++++++++++++++
 configs/evb-rk3399_defconfig                   | 17 +++++++++
 drivers/usb/dwc3/core.c                        | 19 ++++++++++
 drivers/usb/dwc3/core.h                        | 12 ++++++
 5 files changed, 109 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-rockchip/sys_proto.h

-- 
1.9.1