September 2016 Archives by author

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

Starting: Thu Sep 1 02:38:51 CEST 2016
Ending: Fri Sep 30 23:19:12 CEST 2016
Messages: 3239

[U-Boot] [PATCH 0/6] Add support for the BK4R1 variant of PCM052 Albert ARIBAUD (3ADEV)
[U-Boot] [PATCH 1/6] pcm052: fix MTD partitioning Albert ARIBAUD (3ADEV)
[U-Boot] [PATCH 2/6] pcm052: remove target-specific dtb name from env Albert ARIBAUD (3ADEV)
[U-Boot] [PATCH 3/6] pcm052: add 'm4go' command Albert ARIBAUD (3ADEV)
[U-Boot] [PATCH 4/6] tools: mkimage: add support for Vybrid image format Albert ARIBAUD (3ADEV)
[U-Boot] [PATCH 5/6] pcm052: allow specifying onboard DDR size in configs Albert ARIBAUD (3ADEV)
[U-Boot] [PATCH 6/6] pcm052: add new BK4r1 target based on PCM052 SoM Albert ARIBAUD (3ADEV)
[U-Boot] [PATCH] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Jon Medhurst (Tixy)
[U-Boot] [PATCH v2] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Jon Medhurst (Tixy)
[U-Boot] [PATCH v2] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Jon Medhurst (Tixy)
[U-Boot] [PATCH v2] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Jon Medhurst (Tixy)
[U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one Thomas Abraham
[U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one Thomas Abraham
[U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one Thomas Abraham
[U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one Thomas Abraham
[U-Boot] [PATCH] imx: mx6: fix USB bmode to use reserved value Stefan Agner
[U-Boot] [PATCH 0/5] Secure EMIF firewall and memory reservation on DRA7xx/AM57x devices Daniel Allred
[U-Boot] [PATCH 1/5] ti: omap5: Add Kconfig options for secure EMIF reservations Daniel Allred
[U-Boot] [PATCH 2/5] arm: omap5: secure API for EMIF memory reservations Daniel Allred
[U-Boot] [PATCH 3/5] ARM: DRA7: Add secure emif setup calls Daniel Allred
[U-Boot] [PATCH 4/5] ti_omap5_common: mark region of DRAM protected on HS parts Daniel Allred
[U-Boot] [PATCH 5/5] ARM: omap5: add fdt secure dram reservation fixup Daniel Allred
[U-Boot] [PATCH 4/5] ti_omap5_common: mark region of DRAM protected on HS parts Allred, Daniel
[U-Boot] [PATCH 3/5] ARM: DRA7: Add secure emif setup calls Allred, Daniel
[U-Boot] [PATCH 3/5] ARM: DRA7: Add secure emif setup calls Allred, Daniel
[U-Boot] [PATCH 1/5] ti: omap5: Add Kconfig options for secure EMIF reservations Allred, Daniel
[U-Boot] [PATCH] nds32: Support relocation. Andes
[U-Boot] Disabling Auto Negotiation Arno
[U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works Steve Arnold
[U-Boot] [PATCH] dra7x: dfu: qspi: increase the qspi spl partition to 256K B, Ravi
[U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL B, Ravi
[U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL B, Ravi
[U-Boot] Building u-boot.imx and SPL simultaneously Stefano Babic
[U-Boot] Building u-boot.imx and SPL simultaneously Stefano Babic
[U-Boot] [PATCH v2 2/3] warp7: Use PARTUUID to specify the rootfs location Stefano Babic
[U-Boot] Building u-boot.imx and SPL simultaneously Stefano Babic
[U-Boot] Building u-boot.imx and SPL simultaneously Stefano Babic
[U-Boot] [PATCH v2 1/3] warp7: Add a secure mode target Stefano Babic
[U-Boot] [PATCH v2 2/3] warp7: Use PARTUUID to specify the rootfs location Stefano Babic
[U-Boot] [PATCH] ARM: board: cm_fx6: fix mtd partition fixup Stefano Babic
[U-Boot] [PATCH 1/3] pico-imx6ul: Directly write to register LDOGCTL Stefano Babic
[U-Boot] [PATCH 2/3] mx7dsabresd: Directly write to register LDOGCTL Stefano Babic
[U-Boot] [PATCH 3/3] mx7dsabresd: Directly write to register LDOGCTL Stefano Babic
[U-Boot] [PATCH v4 2/4] mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang Stefano Babic
[U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
[U-Boot] [PATCH] treewide: compress lines for immediate return Stefano Babic
[U-Boot] [PATCH v2 1/3] warp7: Add a secure mode target Stefano Babic
[U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
[U-Boot] [PULL] Resend: Please pull u-boot-imx Stefano Babic
[U-Boot] Building u-boot.imx and SPL simultaneously Stefano Babic
[U-Boot] i.MX6: NAND boot with SPL Stefano Babic
[U-Boot] i.MX6: NAND boot with SPL Stefano Babic
[U-Boot] [PATCH] dra7xx: config: cleanup: moved to kconfig for CONFIG_SPL_ENV_SUPPORT Ravi Babu
[U-Boot] [PATCH] dra7x: dfu: qspi: increase the qspi spl partition to 256K Ravi Babu
[U-Boot] [PATCH] dra7x: dfu: qspi: increase the qspi spl partition to 256K Ravi Babu
[U-Boot] [PATCH] env: tool: add command line option to input lockfile path Ravi Babu
[U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL Ravi Babu
[U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL Ravi Babu
[U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL Ravi Babu
[U-Boot] [PATCH v1] spl: saveenv: adding saveenv support in SPL Ravi Babu
[U-Boot] [PATCH] eth: asix88179: Reset device during probe with DM_ETH enabled Alban Bedel
[U-Boot] [PATCH] board: ge: bx50v3: Pass video bootargs for b850v3 Akshay Bhat
[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller Michael Brandl
[U-Boot] ?==?utf-8?q? ?==?utf-8?q? [PATCH v6]?==?utf-8?q? spi:?==?utf-8?q? pl022_spi: Add support for ARM PL022 spi controller Michael Brandl
[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller Michael Brandl
[U-Boot] [PATCH] arc: Use -mcpu=XXX instead of obsolete -marcXXX Alexey Brodkin
[U-Boot] Please pull ARC changes Alexey Brodkin
[U-Boot] [PATCH 2/8] Remove arch/${ARCH}/include/asm/errno.h Alexey Brodkin
[U-Boot] [RESEND PATCH 04/10] Remove arch/${ARCH}/include/asm/errno.h Alexey Brodkin
[U-Boot] [PATCH] arm: imx6: configure NoC on i.MX6DQP Filip Brozovic
[U-Boot] [PATCH] imx: iomux-v3: fix pad setup on i.MX6DQP when CONFIG_MX6QDL is defined Filip Brozovic
[U-Boot] [PATCH v3 3/4] ext4: fix endianess problems in ext4 write support Stefan Bruens
[U-Boot] [PATCH v3 13/13] ext4: initialize full inode for inodes bigger than 128 bytes Stefan Bruens
[U-Boot] [PATCH 3/3 v2] test/fs: strip carriage-return from sandbox output Stefan Bruens
[U-Boot] [PATCH 2/3] test/fs: Check ext4 behaviour if dirent is first entry in directory block Stefan Bruens
[U-Boot] [PATCH 3/3] test/fs: Check writes using "." (same dir) relative path Stefan Bruens
[U-Boot] [PATCH] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC Patrick Brünn
[U-Boot] [PATCH v4 06/13] ext4: scan all directory blocks when looking up an entry Stefan Brüns
[U-Boot] ext4 delete file fails when ext4 extents enabled in filesystem Brüns, Stefan
[U-Boot] ext4 delete file fails when ext4 extents enabled in filesystem Brüns, Stefan
[U-Boot] [PATCH v5 00/16] Fix several possible crashes/corruptions in ext4 Stefan Brüns
[U-Boot] [PATCH v5 01/16] ext4: fix possible crash on directory traversal, ignore deleted entries Stefan Brüns
[U-Boot] [PATCH v5 02/16] ext4: propagate error if creation of directory entry fails Stefan Brüns
[U-Boot] [PATCH v5 03/16] ext4: Do not crash when trying to grow a directory using extents Stefan Brüns
[U-Boot] [PATCH v5 04/16] ext4: Scan all directory blocks for space when inserting a new entry Stefan Brüns
[U-Boot] [PATCH v5 05/16] ext4: Avoid corruption of directories with hash tree indexes Stefan Brüns
[U-Boot] [PATCH v5 06/16] ext4: Scan all directory blocks when looking up an entry Stefan Brüns
[U-Boot] [PATCH v5 07/16] ext4: Only update number of of unused inodes if GDT_CSUM feature is set Stefan Brüns
[U-Boot] [PATCH v5 08/16] ext4: Do not clear zalloc'ed buffers a second time Stefan Brüns
[U-Boot] [PATCH v5 09/16] ext4: After completely filled group, scan next group from the beginning Stefan Brüns
[U-Boot] [PATCH v5 10/16] ext4: Avoid out-of-bounds access of block bitmap Stefan Brüns
[U-Boot] [PATCH v5 11/16] ext4: Fix memory leak in case of failure Stefan Brüns
[U-Boot] [PATCH v5 12/16] ext4: Use correct value for inode size even on revision 0 filesystems Stefan Brüns
[U-Boot] [PATCH v5 13/16] ext4: initialize full inode for inodes bigger than 128 bytes Stefan Brüns
[U-Boot] [PATCH v5 14/16] ext4: remove duplicated block release code for extents Stefan Brüns
[U-Boot] [PATCH v5 15/16] ext4: Correct block number handling, empty block vs. error code Stefan Brüns
[U-Boot] [PATCH v5 16/16] ext4: Fix memory leak of journal buffer if block is updated multiple times Stefan Brüns
[U-Boot] [PATCH 2/2] fs/fat: Optimizes memory size with single global variable instead of 3 Brüns, Stefan
[U-Boot] [PATCH] ext4: fix possible crash on directory traversal, ignore deleted entries Brüns, Stefan
[U-Boot] [PATCH 0/3] Enhance fs tests Stefan Brüns
[U-Boot] [PATCH 1/3] test/fs: Restructure file path specification to allow some flexibility Stefan Brüns
[U-Boot] [PATCH 2/3] test/fs: Check ext4 behaviour if dirent is first entry in directory block Stefan Brüns
[U-Boot] [PATCH 3/3] test/fs: Check writes using "." (same dir) relative path Stefan Brüns
[U-Boot] [PATCH 0/4] Fat filesystem enhancements Stefan Brüns
[U-Boot] [PATCH 1/4] fs/fat: Remove two statements without effect Stefan Brüns
[U-Boot] [PATCH 2/4] fs/fat: Do not write unmodified fat entries to disk Stefan Brüns
[U-Boot] [PATCH 3/4] fs/fat: Correct description of determine_fatent function Stefan Brüns
[U-Boot] [PATCH 4/4] cmd/fat: Do not crash on write when <bytes> is not specified Stefan Brüns
[U-Boot] [PATCH 3/3] test/fs: Check writes using "." (same dir) relative path Brüns, Stefan
[U-Boot] [PATCH 2/3] test/fs: Check ext4 behaviour if dirent is first entry in directory block Brüns, Stefan
[U-Boot] [PATCH v2 0/5] Enhance fs tests Stefan Brüns
[U-Boot] [PATCH v2 1/5] test/fs: Restructure file path specification to allow some flexibility Stefan Brüns
[U-Boot] [PATCH v2 2/5] test/fs: remove use of undefined WRITE_FILE variable Stefan Brüns
[U-Boot] [PATCH v2 3/5] test/fs: strip noise from filesystem code prior to checking results Stefan Brüns
[U-Boot] [PATCH v2 4/5] test/fs: Check ext4 behaviour if dirent is first entry in directory block Stefan Brüns
[U-Boot] [PATCH v2 5/5] test/fs: Check writes using "." (same dir) relative path Stefan Brüns
[U-Boot] [PATCH 0/7] Add support for ext4 with enabled 64bit feature Stefan Brüns
[U-Boot] [PATCH 1/7] ext4: Update ext2/3/4 superblock, group descriptor and inode structures Stefan Brüns
[U-Boot] [PATCH 2/7] ext4: determine group descriptor size for 64bit feature Stefan Brüns
[U-Boot] [PATCH 3/7] ext4: Add helper functions for block group descriptor field access Stefan Brüns
[U-Boot] [PATCH 4/7] ext4: Use correct descriptor size when reading the block group descriptor Stefan Brüns
[U-Boot] [PATCH 5/7] ext4: Use helper function to access group descriptor and its fields Stefan Brüns
[U-Boot] [PATCH 6/7] ext4: Respect group descriptor size when adjusting free counts Stefan Brüns
[U-Boot] [PATCH 7/7] ext4: Revert rejection of 64bit enabled ext4 fs Stefan Brüns
[U-Boot] [PATCH v2 3/7] ext4: Add helper functions for block group descriptor field access Stefan Brüns
[U-Boot] [PATCH v2 6/7] ext4: Respect group descriptor size when adjusting free counts Stefan Brüns
[U-Boot] [PATCH 0/6] efi_loader: implement BS.FreePages()/BS.FreePool, some cleanup Stefan Brüns
[U-Boot] [PATCH 1/6] efi_loader: Update description of internal efi_mem_carve_out Stefan Brüns
[U-Boot] [PATCH 2/6] efi_loader: Fix memory map size check to avoid out-of-bounds access Stefan Brüns
[U-Boot] [PATCH 3/6] efi_loader: Track size of pool allocations to allow freeing Stefan Brüns
[U-Boot] [PATCH 4/6] efi_loader: Readd freed pages to memory pool Stefan Brüns
[U-Boot] [PATCH 5/6] efi_loader: Keep memory mapping sorted when splitting an entry Stefan Brüns
[U-Boot] [PATCH 6/6] efi_loader: Do not leak memory when unlinking a mapping Stefan Brüns
[U-Boot] [PATCH 2/6] efi_loader: Fix memory map size check to avoid out-of-bounds access Brüns, Stefan
[U-Boot] [PATCH 0/9] MIPS L2 cache support Paul Burton
[U-Boot] [PATCH 1/9] MIPS: Add arch-wide arch_cpu_init Paul Burton
[U-Boot] [PATCH 2/9] MIPS: Probe cache line sizes once during boot Paul Burton
[U-Boot] [PATCH 3/9] MIPS: Enable use of the instruction cache earlier Paul Burton
[U-Boot] [PATCH 4/9] MIPS: Preserve Config implementation-defined bits Paul Burton
[U-Boot] [PATCH 5/9] MIPS: If we don't need DDR for cache init, init cache first Paul Burton
[U-Boot] [PATCH 6/9] MIPS: Define register names for cache init Paul Burton
[U-Boot] [PATCH 7/9] MIPS: Map CM Global Control Registers Paul Burton
[U-Boot] [PATCH 8/9] MIPS: L2 cache support Paul Burton
[U-Boot] [PATCH 9/9] MIPS: Malta: Enable CM & L2 support Paul Burton
[U-Boot] [PATCH v7 00/12] MIPS Boston Development Board Support Paul Burton
[U-Boot] [PATCH v7 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Paul Burton
[U-Boot] [PATCH v7 02/12] serial: ns16550: Support clocks via phandle Paul Burton
[U-Boot] [PATCH v7 03/12] dt-bindings: Add interrupt-controller/mips-gic.h header Paul Burton
[U-Boot] [PATCH v7 04/12] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge Paul Burton
[U-Boot] [PATCH v7 05/12] pci: Flip condition for detecting non-PCI parent devices Paul Burton
[U-Boot] [PATCH v7 06/12] net: pch_gbe: Use dm_pci_map_bar to discover MMIO base Paul Burton
[U-Boot] [PATCH v7 07/12] net: pch_gbe: Make 64 bit safe Paul Burton
[U-Boot] [PATCH v7 08/12] dm: regmap: Implement simple regmap_read & regmap_write Paul Burton
[U-Boot] [PATCH v7 09/12] dm: core: Match compatible strings in order of priority Paul Burton
[U-Boot] [PATCH v7 10/12] dm: syscon: Provide a generic syscon driver Paul Burton
[U-Boot] [PATCH v7 11/12] clk: boston: Providea simple driver for Boston board clocks Paul Burton
[U-Boot] [PATCH v7 12/12] boston: Introduce support for the MIPS Boston development board Paul Burton
[U-Boot] [PATCH 8/9] MIPS: L2 cache support Paul Burton
[U-Boot] [PATCH 1/9] MIPS: Add arch-wide arch_cpu_init Paul Burton
[U-Boot] [PATCH 8/9] MIPS: L2 cache support Paul Burton
[U-Boot] [PATCH 1/9] MIPS: Add arch-wide arch_cpu_init Paul Burton
[U-Boot] [PATCH 8/9] MIPS: L2 cache support Paul Burton
[U-Boot] [PATCH v7 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Paul Burton
[U-Boot] [PATCH v2 00/10] MIPS L2 cache support Paul Burton
[U-Boot] [PATCH v2 01/10] board_f: Add a mach_cpu_init callback Paul Burton
[U-Boot] [PATCH v2 02/10] MIPS: ath79: Use mach_cpu_init instead of arch_cpu_init Paul Burton
[U-Boot] [PATCH v2 03/10] MIPS: Probe cache line sizes once during boot Paul Burton
[U-Boot] [PATCH v2 04/10] MIPS: Enable use of the instruction cache earlier Paul Burton
[U-Boot] [PATCH v2 05/10] MIPS: Preserve Config implementation-defined bits Paul Burton
[U-Boot] [PATCH v2 06/10] MIPS: If we don't need DDR for cache init, init cache first Paul Burton
[U-Boot] [PATCH v2 07/10] MIPS: Define register names for cache init Paul Burton
[U-Boot] [PATCH v2 08/10] MIPS: Map CM Global Control Registers Paul Burton
[U-Boot] [PATCH v2 09/10] MIPS: L2 cache support Paul Burton
[U-Boot] [PATCH v2 10/10] MIPS: Malta: Enable CM & L2 support Paul Burton
[U-Boot] [PATCH v7 12/12] boston: Introduce support for the MIPS Boston development board Paul Burton
[U-Boot] [PATCH v2 09/10] MIPS: L2 cache support Paul Burton
[U-Boot] [PATCH v7 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Paul Burton
[U-Boot] [PATCH] Revert "image-fit: switch ENOLINK to ENOENT" Paul Burton
[U-Boot] [PATCH] Repair image-fit: switch ENOLINK to ENOENT Paul Burton
[U-Boot] [PATCH] image-fit: Fix fit_get_node_from_config semantics Paul Burton
[U-Boot] [PATCH] MIPS: Hang if run on a secondary CPU Paul Burton
[U-Boot] [PATCH] MIPS: Fix cache maintenance in relocate_code & simplify Paul Burton
[U-Boot] [PATCH v3 00/14] MIPS L2 cache support Paul Burton
[U-Boot] [PATCH v3 01/14] board_f: Add a mach_cpu_init callback Paul Burton
[U-Boot] [PATCH v3 02/14] MIPS: ath79: Use mach_cpu_init instead of arch_cpu_init Paul Burton
[U-Boot] [PATCH v3 03/14] MIPS: Probe cache line sizes once during boot Paul Burton
[U-Boot] [PATCH v3 04/14] MIPS: Enable use of the instruction cache earlier Paul Burton
[U-Boot] [PATCH v3 05/14] MIPS: Preserve Config implementation-defined bits Paul Burton
[U-Boot] [PATCH v3 06/14] MIPS: If we don't need DDR for cache init, init cache first Paul Burton
[U-Boot] [PATCH v3 07/14] MIPS: Define register names for cache init Paul Burton
[U-Boot] [PATCH v3 08/14] MIPS: Map CM Global Control Registers Paul Burton
[U-Boot] [PATCH v3 09/14] MIPS: L2 cache support Paul Burton
[U-Boot] [PATCH v3 10/14] MIPS: Join the coherent domain when a CM is present Paul Burton
[U-Boot] [PATCH v3 11/14] MIPS: Malta: Enable CM & L2 support Paul Burton
[U-Boot] [PATCH v3 12/14] MIPS: Ensure Config.K0=2 applies before any memory accesses Paul Burton
[U-Boot] [PATCH v3 13/14] MIPS: Clear hazard between TagLo writes & cache ops Paul Burton
[U-Boot] [PATCH v3 14/14] MIPS: Ensure cache ops complete in mips_cache_reset Paul Burton
[U-Boot] [PATCH] MIPS: Hang if run on a secondary CPU Paul Burton
[U-Boot] [PATCH v2] MIPS: Hang if run on a secondary CPU Paul Burton
[U-Boot] [PATCH] MIPS: Hang if run on a secondary CPU Paul Burton
[U-Boot] [PATCH] MIPS: Fix boston L2 cache Kconfig selection Paul Burton
[U-Boot] [PATCH v2] MIPS: Hang if run on a secondary CPU Paul Burton
[U-Boot] [PATCH v4] MIPS: Hang if run on a secondary CPU Paul Burton
[U-Boot] [PATCH v4] MIPS: Hang if run on a secondary CPU Paul Burton
[U-Boot] [PATCH v7 10/12] dm: syscon: Provide a generic syscon driver Paul Burton
[U-Boot] [PATCH 8/9] MIPS: add handling for generic and EJTAG exceptions Paul Burton
[U-Boot] [PATCH 0/9] Python 3.x support for patman & dtoc Paul Burton
[U-Boot] [PATCH 1/9] patman: Replace tabs with spaces Paul Burton
[U-Boot] [PATCH 2/9] patman: Make print statements python 3.x safe Paul Burton
[U-Boot] [PATCH 3/9] patman: Make exception handling python 3.x safe Paul Burton
[U-Boot] [PATCH 4/9] patman: Import 'configparser' lower case to be python 3.x safe Paul Burton
[U-Boot] [PATCH 5/9] patman: Decode stdout/stderr as utf8, be python 3.x safe Paul Burton
[U-Boot] [PATCH 6/9] patman: Use items() to iterate over dictionaries in python 3.x Paul Burton
[U-Boot] [PATCH 7/9] dtoc: Use items() to iterate over dictionaries in python 3.x Paul Burton
[U-Boot] [PATCH 8/9] dtoc: Decode strings for struct.unpack on python 3.x Paul Burton
[U-Boot] [PATCH 9/9] dtoc: Make integer division python 3.x safe Paul Burton
[U-Boot] [PATCH 8/9] MIPS: add handling for generic and EJTAG exceptions Paul Burton
[U-Boot] [PATCH 00/23] MIPS Boston fixes, ethernet support & cleanup Paul Burton
[U-Boot] [PATCH 01/23] image: Use ram_top, not bi_memsize, in getenv_bootm_size Paul Burton
[U-Boot] [PATCH 02/23] MIPS: Use ram_top, not bi_memsize, in arch_lmb_reserve Paul Burton
[U-Boot] [PATCH 03/23] MIPS: Fix map_physmem for cached mappings Paul Burton
[U-Boot] [PATCH 04/23] pci: xilinx: Initialise the root bridge during probe Paul Burton
[U-Boot] [PATCH 05/23] pci: xilinx: Avoid writing memory base or limit registers Paul Burton
[U-Boot] [PATCH 06/23] pci: Set of_offset for devices not probed via DT compatible strings Paul Burton
[U-Boot] [PATCH 07/23] pci: Handle MIPS systems with virtual CONFIG_SYS_SDRAM_BASE Paul Burton
[U-Boot] [PATCH 08/23] pci: Make PCI bridge memory alignment configurable Paul Burton
[U-Boot] [PATCH 09/23] boston: Disable PCI bridge memory space alignment Paul Burton
[U-Boot] [PATCH 10/23] net: pch_gbe: Reset during probe Paul Burton
[U-Boot] [PATCH 11/23] net: pch_gbe: Fix rx descriptor buffer addresses Paul Burton
[U-Boot] [PATCH 12/23] net: pch_gbe: CPU accessible addresses are virtual Paul Burton
[U-Boot] [PATCH 13/23] net: pch_gbe: Add cache maintenance Paul Burton
[U-Boot] [PATCH 14/23] gpio: Provide dummy get/request & is_valid functions Paul Burton
[U-Boot] [PATCH 15/23] gpio: eg20t: Add driver for Intel EG20T GPIO controllers Paul Burton
[U-Boot] [PATCH 16/23] net: pch_gbe: Support PHY reset GPIOs Paul Burton
[U-Boot] [PATCH 17/23] MIPS: Make CM GCR base configurable Paul Burton
[U-Boot] [PATCH 18/23] boston: Move CM GCRs away from flash Paul Burton
[U-Boot] [PATCH 19/23] boston: Setup memory ranges in FDT provided to Linux Paul Burton
[U-Boot] [PATCH 20/23] boston: Bump CONFIG_SYS_BOOTM_LEN to 64MiB Paul Burton
[U-Boot] [PATCH 21/23] boston: Enable Realtek ethernet PHY support Paul Burton
[U-Boot] [PATCH 22/23] boston: Probe ethernet controller during boot Paul Burton
[U-Boot] [PATCH 23/23] boston: Enable CONFIG_DISTRO_DEFAULTS in defconfigs Paul Burton
[U-Boot] [PATCH 15/23] gpio: eg20t: Add driver for Intel EG20T GPIO controllers Paul Burton
[U-Boot] [PATCH v2 00/10] Python 3.x support for patman & dtoc Paul Burton
[U-Boot] [PATCH v2 01/10] patman: Replace tabs with spaces Paul Burton
[U-Boot] [PATCH v2 02/10] patman: Make print statements python 3.x safe Paul Burton
[U-Boot] [PATCH v2 03/10] patman: Make exception handling python 3.x safe Paul Burton
[U-Boot] [PATCH v2 04/10] patman: Import 'configparser' lower case to be python 3.x safe Paul Burton
[U-Boot] [PATCH v2 05/10] patman: Decode stdout/stderr as utf8, be python 3.x safe Paul Burton
[U-Boot] [PATCH v2 06/10] patman: Use items() to iterate over dictionaries Paul Burton
[U-Boot] [PATCH v2 07/10] patman: Fix doctest StringIO import for python 3.x Paul Burton
[U-Boot] [PATCH v2 08/10] dtoc: Use items() to iterate over dictionaries in python 3.x Paul Burton
[U-Boot] [PATCH v2 09/10] dtoc: Decode strings for struct.unpack on python 3.x Paul Burton
[U-Boot] [PATCH v2 10/10] dtoc: Make integer division python 3.x safe Paul Burton
[U-Boot] [PATCH 0/9] Python 3.x support for patman & dtoc Paul Burton
[U-Boot] [PATCH] serial: ns16550: Fix serial output on Tegra186 Paul Burton
[U-Boot] [PATCH 14/23] gpio: Provide dummy get/request & is_valid functions Paul Burton
[U-Boot] [PATCH] sun5i: Add defconfig and dts file for the Empire Electronix M712 tablet Ian Campbell
[U-Boot] [PATCH v2] sunxi: display: Use PWM to drive backlight where applicable Ian Campbell
[U-Boot] [PATCH 1/3] sunxi: Sync h3-orangepi dts files with kernel Ian Campbell
[U-Boot] [PATCH] sunxi: musb: Power off OTG port VBUS when disabled Ian Campbell
[U-Boot] [PATCH] sunxi: axp2xx: disable ldoio0/1 at boot Ian Campbell
[U-Boot] [PATCH v2] sunxi: axp2xx: disable ldoio0/1 at boot Ian Campbell
[U-Boot] [PATCH] sunxi: musb: Re-init musb controller on repeated probe calls Ian Campbell
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Vagrant Cascadian
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Vagrant Cascadian
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Vagrant Cascadian
[U-Boot] [PATCH v2] rtl8169: fix cache misalignment message on transmit. Nicolas Chauvet
[U-Boot] [PATCH] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc Tien Fong Chee
[U-Boot] [PATCH] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc Tien Fong Chee
[U-Boot] [PATCH] mmc: cat u8 to u64 to avoid unexpected error Haibo Chen
[U-Boot] [PATCH 0/4] boot-mode support in rockchip platform Jacob Chen
[U-Boot] [PATCH 1/4] rockchip: move partitons define from 3036-kylin to 3036-common Jacob Chen
[U-Boot] [PATCH 2/4] rockchip: rename board.c to rk3288-board.c Jacob Chen
[U-Boot] [PATCH 3/4] rockchip: move common function from board-file to rk3036-board.c Jacob Chen
[U-Boot] [PATCH 4/4] rockchip: add boot-mode support for rk3288, rk3036 Jacob Chen
[U-Boot] [PATCH] clk: rk3399: fix rockchip_get_cru Jacob Chen
[U-Boot] [PATCH] rockchip: enable SPL_OF_PLATDATA for rk3288 board Jacob Chen
[U-Boot] [PATCH 1/2] rockchip: use rockchip linux partitions layout Jacob Chen
[U-Boot] [PATCH 2/2] rockchip: doc: add GPT partition layout Jacob Chen
[U-Boot] rk3288 u-boot Andrea Di Chiara
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode Jaehoon Chung
[U-Boot] [PATCH V4 1/2] mmc: sd: extracting erase related information from sd status Jaehoon Chung
[U-Boot] [PATCH V4 1/2] mmc: sd: extracting erase related information from sd status Jaehoon Chung
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode Jaehoon Chung
[U-Boot] [PATCH v3 1/8] mmc: squash lines for immediate return Jaehoon Chung
[U-Boot] [PATCH V4 1/2] mmc: sd: extracting erase related information from sd status Jaehoon Chung
[U-Boot] [PATCH v2] mmc: s5p_sdhci: support the Driver model for Exynos Jaehoon Chung
[U-Boot] [PATCH] cmd: usb: run 'usb start' when USB is stopped Jaehoon Chung
[U-Boot] [v2, 1/5] mmc: fsl_esdhc: don't set XFERTYP_RSPTYP_48_BUSY for CMD with busy response Jaehoon Chung
[U-Boot] [v2, 2/5] mmc: send STOP command when the READ/WRITE commands fail Jaehoon Chung
[U-Boot] [v2, 4/5] mmc: add workaround for eSDHC erratum A009620 Jaehoon Chung
[U-Boot] [v2, 1/5] mmc: fsl_esdhc: don't set XFERTYP_RSPTYP_48_BUSY for CMD with busy response Jaehoon Chung
[U-Boot] [PATCH 02/21] mmc: tegra: use correct alias for SDHCI/MMC nodes Jaehoon Chung
[U-Boot] [PATCH] mmc: cat u8 to u64 to avoid unexpected error Jaehoon Chung
[U-Boot] [PATCH] mmc: dw_mmc: push/pop all FIFO data if any data request Jaehoon Chung
[U-Boot] [bug report] sunxi: booting from eMMC Jaehoon Chung
[U-Boot] [PATCH v1] dm/mmc: gen_atmel_mci: Add driver model support for mci Jaehoon Chung
[U-Boot] [PATCH] mmc: cat u8 to u64 to avoid unexpected error Jaehoon Chung
[U-Boot] [PATCH v2 7/7] mmc: atmel_sdhci: Remove unneccessary clock calling Jaehoon Chung
[U-Boot] [PATCH v2 0/6] mmc: sdhci: some fixes for CONFIG_BLK migration and macro renaming Jaehoon Chung
[U-Boot] Please pull u-boot-mmc Jaehoon Chung
[U-Boot] [PATCH] mmc: dw_mmc: remove the unnecessary arguments for dwmci_setup_cfg Jaehoon Chung
[U-Boot] [PATCH 1/2] mmc: sdhci: use the host version value in sdhci_setup_cfg Jaehoon Chung
[U-Boot] [PATCH 2/2] mmc: sdhci: use the generic error number Jaehoon Chung
[U-Boot] [PATCH 2/2] mmc: sdhci: use the generic error number Jaehoon Chung
[U-Boot] [PATCH v2 1/2] mmc: sdhci: use the host version value in sdhci_setup_cfg Jaehoon Chung
[U-Boot] [PATCH v2 2/2] mmc: sdhci: use the generic error number Jaehoon Chung
[U-Boot] [PATCH v2] mmc: sdhci: Add the programmable clock mode support Jaehoon Chung
[U-Boot] [PATCH] serial: ns16550: Handle -ENOENT when requesting clock Alexandre Courbot
[U-Boot] [PATCH] serial: ns16550: Fix serial output on Tegra186 Alexandre Courbot
[U-Boot] [PATCH] serial: ns16550: Handle -ENOENT when requesting clock Alexandre Courbot
[U-Boot] [PATCH] serial: ns16550: Fix serial output on Tegra186 Alexandre Courbot
[U-Boot] Curses from u-boot Daniel.
[U-Boot] Curses from u-boot Daniel.
[U-Boot] [PATCH v3] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree Sriram Dash
[U-Boot] [PATCH v3] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree Sriram Dash
[U-Boot] [PATCH v3] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree Sriram Dash
[U-Boot] [PATCH v3] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v3] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree Sriram Dash
[U-Boot] [PATCH 0/2] Renaming the fsl/nxp specific functions Sriram Dash
[U-Boot] [PATCH 1/2] usb: fsl: Rename fdt_fixup_dr_usb Sriram Dash
[U-Boot] [PATCH 2/2] usb: fsl: Renaming fdt_fixup_erratum and fdt_fixup_usb_erratum Sriram Dash
[U-Boot] [PATCH v4] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH 2/2] usb: fsl: Renaming fdt_fixup_erratum and fdt_fixup_usb_erratum Sriram Dash
[U-Boot] [PATCH 0/2] Enable DM support for USB in LS2080 Sriram Dash
[U-Boot] [PATCH 1/2] armv8: ls2080: Enable CONFIG_DM_USB in defconfigs Sriram Dash
[U-Boot] [PATCH 2/2] armv8: ls2080: Add USB node in dts for ls2080 Sriram Dash
[U-Boot] [PATCH 0/2] Enable DM support for USB in LS1043 Sriram Dash
[U-Boot] [PATCH 1/2] armv8: ls1043: Enable CONFIG_DM_USB in defconfigs Sriram Dash
[U-Boot] [PATCH 2/2] armv8: ls1043: Add USB node in dts for ls1043 Sriram Dash
[U-Boot] [PATCH v2 5/7] arm: mach-keystone: config.mk: Adds support for secure images on K2 Andrew F. Davis
[U-Boot] [PATCH v4 10/10] defconfig: Add a config for AM335x High Security EVM with SD Boot support Andrew F. Davis
[U-Boot] [PATCH 1/5] ti: omap5: Add Kconfig options for secure EMIF reservations Andrew F. Davis
[U-Boot] [PATCH 3/5] ARM: DRA7: Add secure emif setup calls Andrew F. Davis
[U-Boot] [PATCH 4/5] ti_omap5_common: mark region of DRAM protected on HS parts Andrew F. Davis
[U-Boot] [PATCH v4 10/10] defconfig: Add a config for AM335x High Security EVM with SD Boot support Andrew F. Davis
[U-Boot] [PATCH 5/5] ARM: omap5: add fdt secure dram reservation fixup Andrew F. Davis
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Andrew F. Davis
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Andrew F. Davis
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Andrew F. Davis
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Andrew F. Davis
[U-Boot] [PATCH] common/xyzModem.c: Fix delay timeout calculation Andrew F. Davis
[U-Boot] [PATCH v2] common/xyzModem.c: Fix delay timeout calculation Andrew F. Davis
[U-Boot] [PATCH v2] common/xyzModem.c: Fix delay timeout calculation Andrew F. Davis
[U-Boot] [PATCH] global_data.h: Format with proper tabs so comments line up. Robert P. J. Day
[U-Boot] when does default env get written to flash on a new system? Robert P. J. Day
[U-Boot] when does default env get written to flash on a new system? Robert P. J. Day
[U-Boot] [PATCH] AT91: Correct misspelling of "redundent" in partition names Robert P. J. Day
[U-Boot] [PATCH v2] global_data.h: Standardize tabs and alignment for comments Robert P. J. Day
[U-Boot] any value to XTRN_DECLARE_GLOBAL_DATA_PTR these days? Robert P. J. Day
[U-Boot] is it necessary to set "gd->env_valid = 0" in getenv_default()? Robert P. J. Day
[U-Boot] is anyone using CONFIG_DELAY_ENVIRONMENT? Robert P. J. Day
[U-Boot] why does only zynqmp check GD_FLG_ENV_DEFAULT? Robert P. J. Day
[U-Boot] why does only zynqmp check GD_FLG_ENV_DEFAULT? Robert P. J. Day
[U-Boot] [PATCH] Various, accumulated typos collected from around the tree. Robert P. J. Day
[U-Boot] "_ENTRY" is both a struct and a typedef? Robert P. J. Day
[U-Boot] [PATCH] search.h: Numerous grammatical fixes, comment updates Robert P. J. Day
[U-Boot] pedantry: is a FIT image really an enhanced type of uImage? Robert P. J. Day
[U-Boot] question about himport_r() and possible separator Robert P. J. Day
[U-Boot] [PATCH] PWM: Correct misspellings of "module" in context of PWM Robert P. J. Day
[U-Boot] recommended place to add some custom settings to u-boot environment? Robert P. J. Day
[U-Boot] recommended place to add some custom settings to u-boot environment? Robert P. J. Day
[U-Boot] eb_cpu5282.c board returns failure(?) from misc_init_r() Robert P. J. Day
[U-Boot] really weird return codes in mcf5373l.c, misc_init_r() Robert P. J. Day
[U-Boot] recommended place to add some custom settings to u-boot environment? Robert P. J. Day
[U-Boot] does it make sense to define misc_init_r() not conditional on CONFIG_MISC_INIT_R? Robert P. J. Day
[U-Boot] recommended place to add some custom settings to u-boot environment? Robert P. J. Day
[U-Boot] recommended place to add some custom settings to u-boot environment? Robert P. J. Day
[U-Boot] how to programatically add a second hash table to the environment? Robert P. J. Day
[U-Boot] long-term plans to get rid of include/configs/ directory? Robert P. J. Day
[U-Boot] couple questions on driver model for gpio, and gpio in sandbox Robert P. J. Day
[U-Boot] "CONFIG_*" versus "CONFIG_SYS_*" variables in u-boot? Robert P. J. Day
[U-Boot] is there any issue with creating and using more than one hashtable? Robert P. J. Day
[U-Boot] question about bootstage and timer_init in init_sequence_f Patrick Delaunay
[U-Boot] [ANN] U-Boot v2016.09 is released Wolfgang Denk
[U-Boot] recommended place to add some custom settings to u-boot environment? Wolfgang Denk
[U-Boot] recommended place to add some custom settings to u-boot environment? Wolfgang Denk
[U-Boot] recommended place to add some custom settings to u-boot environment? Wolfgang Denk
[U-Boot] recommended place to add some custom settings to u-boot environment? Wolfgang Denk
[U-Boot] interaction between CONFIG_CMD_SAVEENV and CONFIG_BOOTCOMMAND Wolfgang Denk
[U-Boot] interaction between CONFIG_CMD_SAVEENV and CONFIG_BOOTCOMMAND Wolfgang Denk
[U-Boot] [PATCH] fsl-ifc-nand : Corrected the programming of chip select Ronak Desai
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Evgeni Dobrev
[U-Boot] [RFC PATCH] arm, Makefile: set SPL_PAYLOAD according to the SoC architecture Raghav Dogra
[U-Boot] [PATCH] arm, Makefile: set SPL_PAYLOAD according to the SoC architecture Raghav Dogra
[U-Boot] [PATCH v3 7/8] arch, board: squash lines for immediate return Angelo Dureghello
[U-Boot] [PATCH v2 1/2] board: amcore: update to use dm serial driver Angelo Dureghello
[U-Boot] [PATCH v2 2/2] board: amcore: add update scripts Angelo Dureghello
[U-Boot] Pull request: u-boot-coldfire/master Angelo Dureghello
[U-Boot] Display output in LCD Othmane Essamlali
[U-Boot] Building u-boot.imx and SPL simultaneously Fabio Estevam
[U-Boot] [PATCH] README.imx6: Fix Boundary Devices name Fabio Estevam
[U-Boot] [PATCH v2 2/3] warp7: Use PARTUUID to specify the rootfs location Fabio Estevam
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Fabio Estevam
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Fabio Estevam
[U-Boot] [PATCH 1/5] imx: mx6ul: Refactor common code as mx6ul Fabio Estevam
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Fabio Estevam
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Fabio Estevam
[U-Boot] [PATCH v2 1/3] warp7: Add a secure mode target Fabio Estevam
[U-Boot] [PATCH v2 1/3] warp7: Add a secure mode target Fabio Estevam
[U-Boot] [PATCH] usb: gadget: ci_udc: fix suspend/resume of USB Mass Storage Fabio Estevam
[U-Boot] [PULL] Resend: Please pull u-boot-imx Fabio Estevam
[U-Boot] [PATCH] wandboard: Fix hang when going into low frequency Fabio Estevam
[U-Boot] [PATCH] wandboard: Remove videoargs script Fabio Estevam
[U-Boot] [RFC] board/liteboard: Add support for liteSOM and liteBoard Fabio Estevam
[U-Boot] [PATCH 21/21] arm: imx: add i.MX6ULL 14x14 EVK board support Fabio Estevam
[U-Boot] [PATCH 5/5] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support Fabio Estevam
[U-Boot] [PATCH v2] Fix cache misalignment after network load operations Fabio Estevam
[U-Boot] [PATCH 21/21] arm: imx: add i.MX6ULL 14x14 EVK board support Fabio Estevam
[U-Boot] [ANN] U-Boot v2016.09.01 is released Fabio Estevam
[U-Boot] [ANN] U-Boot v2016.09.01 is released Fabio Estevam
[U-Boot] [PATCH] mx6sabresd: Make SPL DDR configuration to match the DCD table Fabio Estevam
[U-Boot] [PATCH v2] mx6sabresd: Make SPL DDR configuration to match the DCD table Fabio Estevam
[U-Boot] [PATCH v3 1/2] mx6sabresd: Make SPL DDR configuration to match the DCD table Fabio Estevam
[U-Boot] [PATCH v3 2/2] mx6sabresd: Add SPL support for the mx6dl variant Fabio Estevam
[U-Boot] i.MX6: NAND boot with SPL Fabio Estevam
[U-Boot] [PATCH v3 2/2] mx6sabresd: Add SPL support for the mx6dl variant Fabio Estevam
[U-Boot] [PATCH V3 1/2] mmc: sd: extracting erase timeout information from sd status Peng Fan
[U-Boot] [PATCH V4 1/2] mmc: sd: extracting erase related information from sd status Peng Fan
[U-Boot] [PATCH V4 2/2] mmc: sd: optimize erase Peng Fan
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Peng Fan
[U-Boot] [PATCH 21/21] arm: imx: add i.MX6ULL 14x14 EVK board support Peng Fan
[U-Boot] [PATCH V4 1/2] mmc: sd: extracting erase related information from sd status Peng Fan
[U-Boot] [PATCH V4 1/2] mmc: sd: extracting erase related information from sd status Peng Fan
[U-Boot] [PATCH] cmd: booti: fix the image runtime location Peng Fan
[U-Boot] [PATCH] cmd: booti: fix the image runtime location Peng Fan
[U-Boot] [PATCH] cmd: booti: fix the image runtime location Peng Fan
[U-Boot] [PATCH 21/21] arm: imx: add i.MX6ULL 14x14 EVK board support Peng Fan
[U-Boot] Building u-boot.imx and SPL simultaneously Peng Fan
[U-Boot] [PATCH v2 01/17] imx: iomux-v3: Fix build error with snvs base Peng Fan
[U-Boot] [PATCH v2 02/17] serial: Kconfig: Add MXC_UART entry Peng Fan
[U-Boot] [PATCH v2 03/17] thermal: Kconfig: Add IMX_THERMAL entry Peng Fan
[U-Boot] [PATCH v2 05/17] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support Peng Fan
[U-Boot] [PATCH v2 07/17] imx: s/docs\/README.imximage/doc\/README.imximage/g Peng Fan
[U-Boot] [PATCH v2 08/17] arm: dts: Add devicetree for i.MX6DL Peng Fan
[U-Boot] [PATCH v2 14/17] engicam: icorem6: Add DM_GPIO, DM_MMC support Peng Fan
[U-Boot] [PATCH v2 15/17] arm: dts: Add devicetree for i.MX6Q Peng Fan
[U-Boot] [PATCH 1/2] spi: Kconfig: Move FSL_QSPI entry to non-dm place Peng Fan
[U-Boot] [PATCH 2/2] configs: fsl: Move SPI/SPI-FLASH configs to defconfig Peng Fan
[U-Boot] [PATCH 4/5] imx: mx6ullevk: support plugin Peng Fan
[U-Boot] [PATCH 4/5] imx: mx6ullevk: support plugin Peng Fan
[U-Boot] [PATCH V2 1/8] tools: imximage: add plugin support Peng Fan
[U-Boot] [PATCH V2 2/8] imx: mx6: Add plugin support Peng Fan
[U-Boot] [PATCH V2 3/8] imx: mx7: Add plugin support Peng Fan
[U-Boot] [PATCH V2 4/8] imx-common: inctroude USE_IMXIMG_PLUGIN Kconfig Peng Fan
[U-Boot] [PATCH V2 5/8] imx-common: compile plugin code Peng Fan
[U-Boot] [PATCH V2 6/8] imx: mx6ullevk: support plugin Peng Fan
[U-Boot] [PATCH V2 7/8] imx: mx6ullevk: correct boot device macro Peng Fan
[U-Boot] [PATCH V2 8/8] imx: mx6ull_14x14_evk: add plugin defconfig Peng Fan
[U-Boot] [PATCH V2 6/8] imx: mx6ullevk: support plugin Peng Fan
[U-Boot] [PATCH] imx-common: enlarge mux width to 4 Peng Fan
[U-Boot] [PATCH] imx: imx6ul: disable POR_B internal pull up Peng Fan
[U-Boot] [PATCH] cros_ec: Fix issue with cros_ec_flash_write command Moritz Fischer
[U-Boot] [PATCH] cros_ec: Fix issue with cros_ec_flash_write command Moritz Fischer
[U-Boot] [PATCH v2] cros_ec: Fix issue with cros_ec_flash_write command Moritz Fischer
[U-Boot] [PATCH 1/2] cros_ec: Add function to read back flash parameters Moritz Fischer
[U-Boot] [PATCH 2/2] cros_ec: Add crosec flashinfo command Moritz Fischer
[U-Boot] Chrome OS keyboard not responding on snow Moritz Fischer
[U-Boot] [PATCH] cros_ec: Honor the google,remote-bus dt property Moritz Fischer
[U-Boot] [PATCH v2] MIPS: Hang if run on a secondary CPU Matthew Fortune
[U-Boot] [PATCH 0/9] MIPS: improve start.S and add exception support Matthew Fortune
[U-Boot] [PATCH 2/9] MIPS: fix ROM exception vectors Matthew Fortune
[U-Boot] [PATCH 2/9] MIPS: fix ROM exception vectors Matthew Fortune
[U-Boot] [PATCH] test: add NFS download test Guillaume GARDET
[U-Boot] [PATCH 8/9] net: nfs: Use the tx buffer to construct rpc msgs Guillaume Gardet
[U-Boot] [PATCH 8/9] net: nfs: Use the tx buffer to construct rpc msgs Guillaume Gardet
[U-Boot] [PATCH 8/9] net: nfs: Use the tx buffer to construct rpc msgs Guillaume Gardet
[U-Boot] [u-boot-release] [PATCH] fsl_sfp : Modify macros as per changes in SFP v3.4 Sumit Garg
[U-Boot] [PATCH v2 1/2] board: ls1043ardb: move sec_init to board_init Sumit Garg
[U-Boot] [PATCH v2 2/2] ls1043ardb: PPA: add PPA validation in case of secure boot Sumit Garg
[U-Boot] [PATCH v2] fsl_sfp : Modify macros as per changes in SFP v3.4 Sumit Garg
[U-Boot] [U-Boot-DM] FPGA driver over PCI bus Simon Glass
[U-Boot] [PATCH v2 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model Simon Glass
[U-Boot] [PATCH v2 2/4] ARM: dts: vf: Add device tree node for USB on Vybrid Simon Glass
[U-Boot] [PATCH v2 3/4] ARM: dts: vf-colibri: Enable USB device tree node for Colibri Vybrid Simon Glass
[U-Boot] [PATCH v2 4/4] configs: colibri_vf_defconfig: Enable USB driver model for Colibri Vybrid Simon Glass
[U-Boot] [PATCH v2 0/4] Migrate Vybrid USB driver to driver model Simon Glass
[U-Boot] [PATCH v3 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Simon Glass
[U-Boot] [PATCH v3 2/7] rockchip: select DM_USB for rockchip SoC Simon Glass
[U-Boot] [PATCH v3 3/7] config: rk3399: add usb related configs Simon Glass
[U-Boot] [PATCH v3 4/7] dts: rk3399: add dwc3_typec node for rk3399 Simon Glass
[U-Boot] [PATCH v3 5/7] dts: rk3399-evb: add regulator-fixed for usb host vbus Simon Glass
[U-Boot] [PATCH v3 6/7] board: evb-rk3399: enable usb 2.0 host vbus power on board_init Simon Glass
[U-Boot] [PATCH v3 7/7] config: evb-rk3399: enable fixed regulator Simon Glass
[U-Boot] [PATCH v3 0/7] rk3399: enable host controllers Simon Glass
[U-Boot] [RFC PATCH] rockchip: rk3288: skip lowlevel_init process Simon Glass
[U-Boot] [PATCH v4 1/4] rk3399: add a empty "sys_proto.h" header file Simon Glass
[U-Boot] [PATCH v3 1/2] Disable SPL_MMC_SUPPORT if ROCKCHIP_SPL_BACK_TO_BROM is enabled. Simon Glass
[U-Boot] [PATCH v3 2/2] Enable ROCKCHIP_SPL_BACK_TO_BROM for rock2 board Simon Glass
[U-Boot] [PATCH 1/3] rockchip: i2c: use named constant when appropriate Simon Glass
[U-Boot] [PATCH 2/3] rockchip: i2c: move register write out of inner loop Simon Glass
[U-Boot] [PATCH 3/3] rockchip: i2c: fix >32 byte writes Simon Glass
[U-Boot] [PATCH] sf: fix sf probe Simon Glass
[U-Boot] [PATCH 1/5] mmc: uniphier-sd: migrate to CONFIG_DM_MMC_OPS Simon Glass
[U-Boot] [PATCH 5/5] mmc: uniphier-sd: migrate to CONFIG_BLK Simon Glass
[U-Boot] [PATCH] rockchip: rk3288-firefly: enable boot from eMMC Simon Glass
[U-Boot] [PATCH 2/3] rockchip: add usb mass storage feature support for rk3036 Simon Glass
[U-Boot] [PATCH 3/3] rockchip: use rockchip linux partitions map Simon Glass
[U-Boot] [PATCH 1/7] rockchip: rk3399: update PPLL and pmu_pclk frequency Simon Glass
[U-Boot] [PATCH 2/7] rockchip: rkpwm: fix the register sequence Simon Glass
[U-Boot] [PATCH 3/7] power: regulator: add pwm regulator Simon Glass
[U-Boot] [PATCH 4/7] rockchip: evb_rk3399: init vdd_center regulator Simon Glass
[U-Boot] [PATCH 5/7] Kconfig: rockchip: enable DM_PWM and DM_REGULATOR Simon Glass
[U-Boot] [PATCH 6/7] dts: evb-rk3399: add init voltage node for vdd-center Simon Glass
[U-Boot] [PATCH 7/7] config: evb-rk3399: enable pwm regulator Simon Glass
[U-Boot] [PATCH v2 00/44] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v1] i2c: at91_i2c: Fix the wrong include file Simon Glass
[U-Boot] [PATCH v1 2/2] serial: atmel_usart: Support enable an early debug UART Simon Glass
[U-Boot] [PATCH v1 2/4] board: sama5d2_xplained: Clean up code Simon Glass
[U-Boot] [PATCH v1 4/4] board: sama5d2_xplained: Enable an early debug UART Simon Glass
[U-Boot] [PATCH] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Simon Glass
[U-Boot] [PATCH v1 1/2] clk: at91: Fix at91-pmc and at91-sckc's class ID Simon Glass
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH] eth: asix88179: Reset device during probe with DM_ETH enabled Simon Glass
[U-Boot] [PATCH v2] watchdog: Fix Watchdog Reset while in U-Boot Prompt Simon Glass
[U-Boot] [PATCH 1/5] clk: rk3399: add pmucru controller support Simon Glass
[U-Boot] [PATCH 2/5] clk: rk3288: add PWM clock get rate Simon Glass
[U-Boot] ZynqMP breakage Simon Glass
[U-Boot] [PATCH v2 4/7] x86: squash lines for immediate return Simon Glass
[U-Boot] [PATCH 1/7] rockchip: rk3399: update PPLL and pmu_pclk frequency Simon Glass
[U-Boot] [PATCH] eth: asix88179: Reset device during probe with DM_ETH enabled Simon Glass
[U-Boot] [PATCH 3/7] power: regulator: add pwm regulator Simon Glass
[U-Boot] [PATCH] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Simon Glass
[U-Boot] ZynqMP breakage Simon Glass
[U-Boot] ZynqMP breakage Simon Glass
[U-Boot] [PATCH v3 6/8] libfdt: simplify fdt_del_mem_rsv() Simon Glass
[U-Boot] [PATCH v3 2/8] video: squash lines for immediate return Simon Glass
[U-Boot] ZynqMP breakage Simon Glass
[U-Boot] [PATCH v2 01/44] Correct defconfigs using savedefconfig Simon Glass
[U-Boot] [PATCH v2 07/44] Use separate options for TPL support Simon Glass
[U-Boot] U-Boot memory allocation problems with ast2500 Simon Glass
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Simon Glass
[U-Boot] [RFC PATCH 2/2] Makefile: Give a build error if ad-hoc CONFIG options are added Simon Glass
[U-Boot] [PATCH] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Simon Glass
[U-Boot] [PATCH] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Simon Glass
[U-Boot] [PATCH v3 00/45] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 01/45] Correct defconfigs using savedefconfig Simon Glass
[U-Boot] [PATCH v3 02/45] moveconfig: Add an option to skip prompts Simon Glass
[U-Boot] [PATCH v3 03/45] moveconfig: Add an option to commit changes Simon Glass
[U-Boot] [PATCH v3 04/45] Kconfig: Move SPL settings into their own file Simon Glass
[U-Boot] [PATCH v3 05/45] arm: fsl: Adjust ordering of #ifndef CONFIG_SPL_BUILD Simon Glass
[U-Boot] [PATCH v3 06/45] Drop CONFIG_SPL_RAM_SUPPORT Simon Glass
[U-Boot] [PATCH v3 07/45] Use separate options for TPL support Simon Glass
[U-Boot] [PATCH v3 08/45] Kconfig: spl: Add SPL support options to Kconfig Simon Glass
[U-Boot] [PATCH v3 09/45] Kconfig: tpl: Add some TPL support options to Kconfig Simon Glass
[U-Boot] [PATCH v3 10/45] Move existing use of CONFIG_SPL_DM to Kconfig Simon Glass
[U-Boot] [PATCH v3 11/45] Move existing use of CONFIG_SPL_RSA to Kconfig Simon Glass
[U-Boot] [PATCH v3 12/45] spear: Use upper case for CONFIG options Simon Glass
[U-Boot] [PATCH v3 13/45] Convert CONFIG_SPL_CRYPTO_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 14/45] Convert CONFIG_SPL_HASH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 15/45] Convert CONFIG_SPL_DMA_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 16/45] Convert CONFIG_SPL_DRIVERS_MISC_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 17/45] Convert CONFIG_SPL_ENV_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 18/45] Convert CONFIG_SPL_ETH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 19/45] Convert CONFIG_SPL_EXT_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 20/45] Convert CONFIG_SPL_FAT_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 21/45] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 22/45] Convert CONFIG_SPL_I2C_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 23/45] Convert CONFIG_SPL_LIBCOMMON_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 24/45] Convert CONFIG_SPL_LIBDISK_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 25/45] Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 26/45] Convert CONFIG_SPL_MMC_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 27/45] Convert CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 28/45] Convert CONFIG_SPL_MTD_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 29/45] Convert CONFIG_SPL_MUSB_NEW_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 30/45] Convert CONFIG_SPL_NAND_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 31/45] Convert CONFIG_SPL_NET_VCI_STRING to Kconfig Simon Glass
[U-Boot] [PATCH v3 32/45] Convert CONFIG_SPL_NET_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 33/45] Convert CONFIG_SPL_NOR_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 34/45] Convert CONFIG_SPL_ONENAND_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 35/45] Remove CONFIG_SPL_PINCTRL_SUPPORT Simon Glass
[U-Boot] [PATCH v3 36/45] Convert CONFIG_SPL_POWER_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 37/45] Convert CONFIG_SPL_SATA_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 38/45] Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 39/45] Convert CONFIG_SPL_SPI_FLASH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 40/45] Convert CONFIG_SPL_SPI_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 41/45] Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 42/45] Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 43/45] Convert CONFIG_SPL_USB_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 44/45] Convert CONFIG_SPL_WATCHDOG_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 45/45] Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 0/2] Detect and reject new ad-hoc CONFIG options Simon Glass
[U-Boot] [PATCH v2 1/2] Kconfig: Add a whitelist of ad-hoc CONFIG options Simon Glass
[U-Boot] [PATCH v2 2/2] Makefile: Give a build error if ad-hoc CONFIG options are added Simon Glass
[U-Boot] [PATCH v4 08/45] Kconfig: spl: Add SPL support options to Kconfig Simon Glass
[U-Boot] [PATCH v4 35/45] Remove CONFIG_SPL_PINCTRL_SUPPORT Simon Glass
[U-Boot] [PATCH v3 00/45] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 35/45] Remove CONFIG_SPL_PINCTRL_SUPPORT Simon Glass
[U-Boot] [PATCH v2 0/2] Detect and reject new ad-hoc CONFIG options Simon Glass
[U-Boot] [PATCH v2 0/2] Detect and reject new ad-hoc CONFIG options Simon Glass
[U-Boot] [PATCH v3 0/2] Detect and reject new ad-hoc CONFIG options Simon Glass
[U-Boot] [PATCH v3 1/2] Kconfig: Add a whitelist of ad-hoc CONFIG options Simon Glass
[U-Boot] [PATCH v3 2/2] Makefile: Give a build error if ad-hoc CONFIG options are added Simon Glass
[U-Boot] [PATCH v3 0/2] Detect and reject new ad-hoc CONFIG options Simon Glass
[U-Boot] [PATCH v2 0/5] Enhance fs tests Simon Glass
[U-Boot] [PATCH v2 0/5] Enhance fs tests Simon Glass
[U-Boot] does it make sense to define misc_init_r() not conditional on CONFIG_MISC_INIT_R? Simon Glass
[U-Boot] U-Boot memory allocation problems with ast2500 Simon Glass
[U-Boot] [PATCH 00/27] spl: Use linker list and parameters for SPL image loading Simon Glass
[U-Boot] [PATCH 01/27] spl: Move spl_board_load_image() into a generic header Simon Glass
[U-Boot] [PATCH 02/27] spl: Add a parameter to spl_set_header_raw_uboot() Simon Glass
[U-Boot] [PATCH 03/27] spl: Add a parameter to spl_parse_image_header() Simon Glass
[U-Boot] [PATCH 04/27] spl: Add a parameter to jump_to_image_linux() Simon Glass
[U-Boot] [PATCH 05/27] spl: Add function comments to spl_start_uboot() Simon Glass
[U-Boot] [PATCH 06/27] spl: Kconfig: Move SPL_DISPLAY_PRINT to Kconfig Simon Glass
[U-Boot] [PATCH 07/27] spl: Convert boot_device into a struct Simon Glass
[U-Boot] [PATCH 08/27] spl: Add a way to declare an SPL image loader Simon Glass
[U-Boot] [PATCH 09/27] spl: Convert spl_ram_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 10/27] spl: Convert spl_mmc_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 11/27] spl: Convert spl_ubi_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 12/27] spl: Convert spl_nand_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 13/27] spl: Convert spl_onenand_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 14/27] spl: Convert spl_nor_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 15/27] spl: Convert spl_ymodem_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 16/27] spl: Convert spl_usb_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 17/27] spl: Convert spl_sata_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 18/27] spl: spi: Move the generic SPI loader into common/spl Simon Glass
[U-Boot] [PATCH 19/27] spl: Convert spl_spi_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 20/27] spi: Move freescale-specific code into a private header Simon Glass
[U-Boot] [PATCH 21/27] spl: Convert spl_net_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 22/27] spl: Convert spl_board_load_image() to use linker list Simon Glass
[U-Boot] [PATCH 23/27] spl: Pass spl_image as a parameter to load_image() methods Simon Glass
[U-Boot] [PATCH 24/27] spl: Update ext functions to take an spl_image parameter Simon Glass
[U-Boot] [PATCH 25/27] spl: Update fat functions to take an spl_image parameter Simon Glass
[U-Boot] [PATCH 26/27] spl: Update spl_load_simple_fit() to take an spl_image param Simon Glass
[U-Boot] [PATCH 27/27] spl: Make spl_boot_list a local variable Simon Glass
[U-Boot] [PATCH 00/13] buildman: Threading and output improvements Simon Glass
[U-Boot] [PATCH 01/13] Makefile: Add a target to create the .cfg files Simon Glass
[U-Boot] [PATCH 02/13] buildman: Add an option to just create the config Simon Glass
[U-Boot] [PATCH 03/13] buildman: Add documentation for CONFIG checking Simon Glass
[U-Boot] [PATCH 04/13] buildman: Squash useless output from -K Simon Glass
[U-Boot] [PATCH 05/13] patman: Flush output when there is no newline Simon Glass
[U-Boot] [PATCH 06/13] buildman: Tidy up the 'cloning' message Simon Glass
[U-Boot] [PATCH 07/13] buildman: Print a message when removing old directories Simon Glass
[U-Boot] [PATCH 08/13] buildman: Print a message indicating the build is starting Simon Glass
[U-Boot] [PATCH 09/13] buildman: Put our local libraries first in the path Simon Glass
[U-Boot] [PATCH 10/13] buildman: Allow builds to terminate cleanly Simon Glass
[U-Boot] [PATCH 11/13] buildman: Drop the 'active' flag in the builder Simon Glass
[U-Boot] [PATCH 12/13] buildman: Don't show a stacktrace on Ctrl-C Simon Glass
[U-Boot] [PATCH 13/13] buildman: Drop the 'alive' flag in BuilderThread Simon Glass
[U-Boot] [PATCH] test/py/tests/test_vboot.py: Add check that we boot the image Simon Glass
[U-Boot] [PATCH v3 00/45] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 00/27] spl: Use linker list and parameters for SPL image loading Simon Glass
[U-Boot] [PATCH] ARM: Respect CONFIG_SPL_STACK define in lowlevel_init.S Simon Glass
[U-Boot] [PATCH] cmd/fdt: add possibilty to have 'extrasize' on fdt resize Simon Glass
[U-Boot] [PATCH 1/2] sandbox, x86: select DM_KEYBOARD instead of default y entry Simon Glass
[U-Boot] [PATCH 2/2] input: specify the default of I8042_KEYB in more correct manner Simon Glass
[U-Boot] [PATCH v2 1/4] disk: part: implement generic function part_get_info_by_name() Simon Glass
[U-Boot] [PATCH v2 2/4] fastboot: add support for writing MBR Simon Glass
[U-Boot] [PATCH v2 3/4] disk: part: refactor generic name creation for DOS and ISO Simon Glass
[U-Boot] [PATCH v2 01/10] board_f: Add a mach_cpu_init callback Simon Glass
[U-Boot] [RFC v2] bootm: fix passing argc to standalone apps Simon Glass
[U-Boot] [PATCH v2 4/4] fastboot: move FASTBOOT_FLASH options into Kconfig Simon Glass
[U-Boot] [PATCH] rockchip: miniarm: remove eMMC support Simon Glass
[U-Boot] [PATCH 1/3] treewide: rename CONFIG_SPL_SERIAL_SUPPORT to CONFIG_SPL_SERIAL Simon Glass
[U-Boot] [PATCH 4/4] cmd/fat: Do not crash on write when <bytes> is not specified Simon Glass
[U-Boot] [PATCH 1/2] dt: net: add DWC EQoS binding Simon Glass
[U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device Simon Glass
[U-Boot] [PATCH 1/4] ARM: tegra: add SoC-level hook for board_late_init() Simon Glass
[U-Boot] [PATCH 2/4] ARM: tegra: configure Ethernet address on Tegra186 Simon Glass
[U-Boot] [PATCH 3/4] ARM: tegra: add DWC EQoS (ethernet) to Tegra186 DT Simon Glass
[U-Boot] [PATCH 4/4] ARM: tegra: enable Ethernet on p2771-0000 Simon Glass
[U-Boot] [PATCH 02/21] mmc: tegra: use correct alias for SDHCI/MMC nodes Simon Glass
[U-Boot] [PATCH 01/21] ARM: tegra: fdt: Add 'non-removable' property to all eMMC nodes Simon Glass
[U-Boot] [PATCH 1/2] cros_ec: Add function to read back flash parameters Simon Glass
[U-Boot] [PATCH 2/2] cros_ec: Add crosec flashinfo command Simon Glass
[U-Boot] [PATCH v1 2/3] arm: mvebu: add DB-88F6820-AMC board Simon Glass
[U-Boot] [PATCH 2/5] power: pmic: Palmas: Add the base pmic support Simon Glass
[U-Boot] [PATCH 3/5] power: regulator: palmas: Add regulator support Simon Glass
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Simon Glass
[U-Boot] [PATCH] Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL" Simon Glass
[U-Boot] [PATCH 2/3] ARM: tegra: fix USB controller aliases Simon Glass
[U-Boot] [PATCH 1/3] ARM: tegra: fix USB ULPI PHY reset signal inversion confusion Simon Glass
[U-Boot] [PATCH 3/3] ARM: tegra: fix ULPI PHY on Ventana and Seaboard Simon Glass
[U-Boot] [PATCH v2] power: regulator: Add support for gpio regulators Simon Glass
[U-Boot] [PATCH] image: Fix expected return value Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] Please pull u-boot-rockchip Simon Glass
[U-Boot] [PATCH 00/27] spl: Use linker list and parameters for SPL image loading Simon Glass
[U-Boot] [PATCH 08/27] spl: Add a way to declare an SPL image loader Simon Glass
[U-Boot] [PATCH 00/28] Kconfig: Move console options to Kconfig Simon Glass
[U-Boot] [PATCH 01/28] Remove some merge markers Simon Glass
[U-Boot] [PATCH 02/28] Convert SILENT_CONSOLE options to Kconfig Simon Glass
[U-Boot] [PATCH 03/28] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig Simon Glass
[U-Boot] [PATCH 04/28] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV et al to Kconfig Simon Glass
[U-Boot] [PATCH 05/28] config: Drop CONFIG_CONSOLE Simon Glass
[U-Boot] [PATCH 06/28] config: Drop CONFIG_CONSOLE_DEV Simon Glass
[U-Boot] [PATCH 07/28] Convert CONFIG_VIDEO to Kconfig Simon Glass
[U-Boot] [PATCH 08/28] Convert CONFIG_CFB_CONSOLE to Kconfig Simon Glass
[U-Boot] [PATCH 09/28] Convert CONFIG_CFB_CONSOLE_ANSI to Kconfig Simon Glass
[U-Boot] [PATCH 10/28] Convert CONFIG_VIDEO_CT69000 to Kconfig Simon Glass
[U-Boot] [PATCH 11/28] Convert CONFIG_SYS_CONSOLE_BG_COL et al to Kconfig Simon Glass
[U-Boot] [PATCH 12/28] video: Drop the smiLynxEM driver Simon Glass
[U-Boot] [PATCH 13/28] video: Drop the imx25lcdc driver Simon Glass
[U-Boot] [PATCH 14/28] video: Drop the s3c-fb driver Simon Glass
[U-Boot] [PATCH 15/28] video: Drop the sed13806 driver Simon Glass
[U-Boot] [PATCH 16/28] Convert CONFIG_VGA_AS_SINGLE_DEVICE to Kconfig Simon Glass
[U-Boot] [PATCH 17/28] video: Drop CONFIG_VIDEO_HW_CURSOR Simon Glass
[U-Boot] [PATCH 18/28] Convert CONFIG_VIDEO_SW_CURSOR to Kconfig Simon Glass
[U-Boot] [PATCH 19/28] video: Drop CONFIG_VIDEO_SW_CURSOR Simon Glass
[U-Boot] [PATCH 20/28] Convert CONFIG_CONSOLE_EXTRA_INFO to Kconfig Simon Glass
[U-Boot] [PATCH 21/28] video: Move video_get_info_str() prototype to a header file Simon Glass
[U-Boot] [PATCH 22/28] video: Drop CONFIG_CONSOLE_INFO_QUIET Simon Glass
[U-Boot] [PATCH 23/28] Convert CONFIG_LCD to Kconfig Simon Glass
[U-Boot] [PATCH 24/28] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig Simon Glass
[U-Boot] [PATCH 25/28] Convert CONFIG_SYS_CONSOLE_ENV_OVERWRITE to Kconfig Simon Glass
[U-Boot] [PATCH 26/28] Convert CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE to Kconfig Simon Glass
[U-Boot] [PATCH 27/28] Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig Simon Glass
[U-Boot] [PATCH 28/28] Convert CONFIG_SYS_STDIO_DEREGISTER to Kconfig Simon Glass
[U-Boot] [PATCH v3 1/6] dm: i2c: Add u8 read/write i2c functions Simon Glass
[U-Boot] [PATCH v2] cmd/fdt: add possibilty to have 'extrasize' on fdt resize Simon Glass
[U-Boot] [PATCH 1/2] usb: host: add Kconfig for USB_XHCI_ROCKCHIP Simon Glass
[U-Boot] [PATCH 2/2] rk3399: move the USB_XHCI_ROCKCHIP into Kconfig Simon Glass
[U-Boot] Please pull u-boot-rockchip Simon Glass
[U-Boot] Please pull u-boot-rockchip (take 2) Simon Glass
[U-Boot] [PATCH] rockchip: Fix SPL console output when ROCKCHIP_SPL_BACK_TO_BROM is enabled Simon Glass
[U-Boot] [PATCH] rockchip: rk3288: sdram: fix DDR address range Simon Glass
[U-Boot] [PATCH v2 1/7] rockchip: rk3399: update PPLL and pmu_pclk frequency Simon Glass
[U-Boot] [PATCH v2 3/7] power: regulator: add pwm regulator Simon Glass
[U-Boot] [PATCH v2 6/7] dts: evb-rk3399: add init voltage node for vdd-center Simon Glass
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode Simon Glass
[U-Boot] [PATCH v2 2/3] rk3288: sdram: auto-detect the capacity Simon Glass
[U-Boot] disabling mmc in spl when booting using bootrom Simon Glass
[U-Boot] [PATCH 1/4] rockchip: move partitons define from 3036-kylin to 3036-common Simon Glass
[U-Boot] [PATCH 2/4] rockchip: rename board.c to rk3288-board.c Simon Glass
[U-Boot] [PATCH 3/4] rockchip: move common function from board-file to rk3036-board.c Simon Glass
[U-Boot] [PATCH 4/4] rockchip: add boot-mode support for rk3288, rk3036 Simon Glass
[U-Boot] [PATCH v2 3/3] dts: rk3288: remove node in dmc which not need anymore Simon Glass
[U-Boot] Rockchip patches for testing Simon Glass
[U-Boot] Fw: FDT pointer value, passed by the PI firmware, is not set in u-boot Simon Glass
[U-Boot] [PATCH 06/13] buildman: Tidy up the 'cloning' message Simon Glass
[U-Boot] [PATCH] cmd: usb: run 'usb start' when USB is stopped Simon Glass
[U-Boot] [PATCH v2] cros_ec: Fix issue with cros_ec_flash_write command Simon Glass
[U-Boot] [PATCH v7 09/12] dm: core: Match compatible strings in order of priority Simon Glass
[U-Boot] [PATCH v7 10/12] dm: syscon: Provide a generic syscon driver Simon Glass
[U-Boot] [PATCH v3 2/6] power: regulator: Add ctrl_reg and volt_reg fields for pmic Simon Glass
[U-Boot] [PATCH v3 3/6] power: pmic: Palmas: Add the base pmic support Simon Glass
[U-Boot] [RESEND PATCH 01/10] treewide: use #include <...> to include public headers Simon Glass
[U-Boot] [RESEND PATCH 02/10] Add <linux/errno.h> as a wrapper of <asm-generic/errno.h> Simon Glass
[U-Boot] [PATCH v2 1/2] serial: Kconfig: Add ATMEL_USART option Simon Glass
[U-Boot] [PATCH] fpga: Add Kconfig to fpga subsystem Simon Glass
[U-Boot] [PATCH 2/2] input: specify the default of I8042_KEYB in more correct manner Simon Glass
[U-Boot] [PATCH v1] ARM: dts: Makefile: Use board to decide to compile dts Simon Glass
[U-Boot] [PATCH 1/2] Makefile: use if_change_dep for u-boot.cfg Simon Glass
[U-Boot] [PATCH 2/2] Makefile: rm u-boot.cfg dependencies are missing Simon Glass
[U-Boot] [PATCH v2] mmc: mmc-uclass: Add mmc_init() in mmc preinit phrase Simon Glass
[U-Boot] [PATCH v3 1/6] dm: i2c: Add u8 read/write i2c functions Simon Glass
[U-Boot] U-boot Driver Model - MMC - missing uclass implementation? Simon Glass
[U-Boot] [PATCH 02/28] Convert SILENT_CONSOLE options to Kconfig Simon Glass
[U-Boot] [PATCH v2 1/2] build-whitelist: do not add new options to whitelist when update Simon Glass
[U-Boot] [PATCH v2 2/2] Sync config_whitelist.txt Simon Glass
[U-Boot] [PATCH v7 10/12] dm: syscon: Provide a generic syscon driver Simon Glass
[U-Boot] U-boot Driver Model - MMC - missing uclass implementation? Simon Glass
[U-Boot] [PATCH 04/28] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV et al to Kconfig Simon Glass
[U-Boot] [PATCH 06/13] buildman: Tidy up the 'cloning' message Simon Glass
[U-Boot] [PATCH] rockchip: rk3288: sdram: fix DDR address range Simon Glass
[U-Boot] [PATCH] rockchip: Fix SPL console output when ROCKCHIP_SPL_BACK_TO_BROM is enabled Simon Glass
[U-Boot] [PATCH v3 1/2] Disable SPL_MMC_SUPPORT if ROCKCHIP_SPL_BACK_TO_BROM is enabled. Simon Glass
[U-Boot] [PATCH v3 2/2] Enable ROCKCHIP_SPL_BACK_TO_BROM for rock2 board Simon Glass
[U-Boot] [PATCH 2/3] rockchip: add usb mass storage feature support for rk3036 Simon Glass
[U-Boot] [PATCH v3 1/7] rockchip: rk3399: update PPLL and pmu_pclk frequency Simon Glass
[U-Boot] [PATCH v3 2/7] rockchip: rkpwm: fix the register sequence Simon Glass
[U-Boot] [PATCH v3 3/7] power: regulator: add pwm regulator Simon Glass
[U-Boot] [PATCH v3 4/7] rockchip: evb_rk3399: init vdd_center regulator Simon Glass
[U-Boot] [PATCH v3 5/7] Kconfig: rockchip: enable DM_PWM and DM_REGULATOR Simon Glass
[U-Boot] [PATCH v3 6/7] dts: evb-rk3399: add init voltage node for vdd-center Simon Glass
[U-Boot] [PATCH v3 7/7] config: evb-rk3399: enable pwm regulator Simon Glass
[U-Boot] [PATCH] rockchip: miniarm: remove eMMC support Simon Glass
[U-Boot] [PATCH 1/2] Makefile: use if_change_dep for u-boot.cfg Simon Glass
[U-Boot] [RFC PATCH 1/2] dm: Add support for scsi/sata based devices Simon Glass
[U-Boot] [RFC PATCH 2/2] block: Move ceva driver to DM Simon Glass
[U-Boot] [PATCH v2 00/29] Kconfig: Move console options to Kconfig Simon Glass
[U-Boot] [PATCH v2 01/29] Remove some merge markers Simon Glass
[U-Boot] [PATCH v2 02/29] Convert SILENT_CONSOLE options to Kconfig Simon Glass
[U-Boot] [PATCH v2 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig Simon Glass
[U-Boot] [PATCH v2 04/29] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV et al to Kconfig Simon Glass
[U-Boot] [PATCH v2 05/29] config: Drop CONFIG_CONSOLE Simon Glass
[U-Boot] [PATCH v2 06/29] config: Drop CONFIG_CONSOLE_DEV Simon Glass
[U-Boot] [PATCH v2 07/29] Convert CONFIG_VIDEO to Kconfig Simon Glass
[U-Boot] [PATCH v2 08/29] Convert CONFIG_CFB_CONSOLE to Kconfig Simon Glass
[U-Boot] [PATCH v2 09/29] Convert CONFIG_CFB_CONSOLE_ANSI to Kconfig Simon Glass
[U-Boot] [PATCH v2 10/29] Convert CONFIG_VIDEO_CT69000 to Kconfig Simon Glass
[U-Boot] [PATCH v2 11/29] Convert CONFIG_SYS_CONSOLE_BG_COL et al to Kconfig Simon Glass
[U-Boot] [PATCH v2 12/29] video: Drop the smiLynxEM driver Simon Glass
[U-Boot] [PATCH v2 13/29] video: Drop the imx25lcdc driver Simon Glass
[U-Boot] [PATCH v2 14/29] video: Drop the s3c-fb driver Simon Glass
[U-Boot] [PATCH v2 15/29] video: Drop the sed13806 driver Simon Glass
[U-Boot] [PATCH v2 16/29] Convert CONFIG_VGA_AS_SINGLE_DEVICE to Kconfig Simon Glass
[U-Boot] [PATCH v2 17/29] video: Drop CONFIG_VIDEO_HW_CURSOR Simon Glass
[U-Boot] [PATCH v2 18/29] Convert CONFIG_VIDEO_SW_CURSOR to Kconfig Simon Glass
[U-Boot] [PATCH v2 19/29] video: Drop CONFIG_VIDEO_SW_CURSOR Simon Glass
[U-Boot] [PATCH v2 20/29] Convert CONFIG_CONSOLE_EXTRA_INFO to Kconfig Simon Glass
[U-Boot] [PATCH v2 21/29] video: Move video_get_info_str() prototype to a header file Simon Glass
[U-Boot] [PATCH v2 22/29] video: Drop CONFIG_CONSOLE_INFO_QUIET Simon Glass
[U-Boot] [PATCH v2 23/29] Convert CONFIG_LCD to Kconfig Simon Glass
[U-Boot] [PATCH v2 24/29] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig Simon Glass
[U-Boot] [PATCH v2 25/29] Convert CONFIG_SYS_CONSOLE_ENV_OVERWRITE to Kconfig Simon Glass
[U-Boot] [PATCH v2 26/29] Convert CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE to Kconfig Simon Glass
[U-Boot] [PATCH v2 27/29] Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig Simon Glass
[U-Boot] [PATCH v2 28/29] Convert CONFIG_USB_KEYBOARD to Kconfig Simon Glass
[U-Boot] [PATCH v2 29/29] Convert CONFIG_SYS_STDIO_DEREGISTER to Kconfig Simon Glass
[U-Boot] [PATCH v2 00/27] spl: Use linker list and parameters for SPL image loading Simon Glass
[U-Boot] [PATCH v2 01/27] spl: Move spl_board_load_image() into a generic header Simon Glass
[U-Boot] [PATCH v2 02/27] spl: Add a parameter to spl_set_header_raw_uboot() Simon Glass
[U-Boot] [PATCH v2 03/27] spl: Add a parameter to spl_parse_image_header() Simon Glass
[U-Boot] [PATCH v2 04/27] spl: Add a parameter to jump_to_image_linux() Simon Glass
[U-Boot] [PATCH v2 05/27] spl: Add function comments to spl_start_uboot() Simon Glass
[U-Boot] [PATCH v2 06/27] spl: Kconfig: Move SPL_DISPLAY_PRINT to Kconfig Simon Glass
[U-Boot] [PATCH v2 07/27] spl: Convert boot_device into a struct Simon Glass
[U-Boot] [PATCH v2 08/27] spl: Add a way to declare an SPL image loader Simon Glass
[U-Boot] [PATCH v2 09/27] spl: Convert spl_ram_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 10/27] spl: Convert spl_mmc_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 11/27] spl: Convert spl_ubi_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 12/27] spl: Convert spl_nand_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 13/27] spl: Convert spl_onenand_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 14/27] spl: Convert spl_nor_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 15/27] spl: Convert spl_ymodem_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 16/27] spl: Convert spl_usb_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 17/27] spl: Convert spl_sata_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 18/27] spl: spi: Move the generic SPI loader into common/spl Simon Glass
[U-Boot] [PATCH v2 19/27] spl: Convert spl_spi_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 20/27] spi: Move freescale-specific code into a private header Simon Glass
[U-Boot] [PATCH v2 21/27] spl: Convert spl_net_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 22/27] spl: Convert spl_board_load_image() to use linker list Simon Glass
[U-Boot] [PATCH v2 23/27] spl: Pass spl_image as a parameter to load_image() methods Simon Glass
[U-Boot] [PATCH v2 24/27] spl: Update ext functions to take an spl_image parameter Simon Glass
[U-Boot] [PATCH v2 25/27] spl: Update fat functions to take an spl_image parameter Simon Glass
[U-Boot] [PATCH v2 26/27] spl: Update spl_load_simple_fit() to take an spl_image param Simon Glass
[U-Boot] [PATCH v2 27/27] spl: Make spl_boot_list a local variable Simon Glass
[U-Boot] [PATCH v2 1/8] x86: Add implementations of setjmp() and longjmp() Simon Glass
[U-Boot] [PATCH v2 2/8] efi: Use asmlinkage for EFIAPI Simon Glass
[U-Boot] [PATCH v2 3/8] efi: Fix missing EFIAPI specifiers Simon Glass
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Simon Glass
[U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program Simon Glass
[U-Boot] [PATCH v2 6/8] x86: efi: Add EFI loader support for x86 Simon Glass
[U-Boot] [PATCH v2 7/8] x86: efi: Add a hello world test program Simon Glass
[U-Boot] [PATCH v2 8/8] x86: Enable EFI loader support Simon Glass
[U-Boot] [PATCH v2 00/12] binman: A tool for creating firmware images Simon Glass
[U-Boot] [PATCH v2 01/12] dtoc: Fix bug in GetProp() Simon Glass
[U-Boot] [PATCH v2 02/12] dtoc: Adjust GetProps() in fdt_normal to use the node path Simon Glass
[U-Boot] [PATCH v2 03/12] dtoc: Add a way for tests to request the fallback library Simon Glass
[U-Boot] [PATCH v2 04/12] binman: Introduce binman, a tool for building binary images Simon Glass
[U-Boot] [PATCH v2 05/12] binman: Add basic entry types for U-Boot Simon Glass
[U-Boot] [PATCH v2 06/12] binman: Add support for building x86 ROMs Simon Glass
[U-Boot] [PATCH v2 07/12] binman: Add support for u-boot.img as an input binary Simon Glass
[U-Boot] [PATCH v2 08/12] binman: Add support for building x86 ROMs with SPL Simon Glass
[U-Boot] [PATCH v2 09/12] binman: Add a build rule for binman Simon Glass
[U-Boot] [PATCH v2 10/12] binman: Allow configuration options to be used in .dts files Simon Glass
[U-Boot] [PATCH v2 11/12] RFC: Use binman for a sunxi board Simon Glass
[U-Boot] [PATCH v2 12/12] RFC: Use binman for an x86 board Simon Glass
[U-Boot] [PATCH 00/82] x86: Add initial support for 64-bit U-Boot Simon Glass
[U-Boot] [PATCH 01/82] WIP: x86: Fix up types in smbios code Simon Glass
[U-Boot] [PATCH 02/82] Add _image_binary_end section declaration Simon Glass
[U-Boot] [PATCH 03/82] bios_emulator: Fix cast for 64-bit compilation Simon Glass
[U-Boot] [PATCH 04/82] board_f: Drop the extra fdtdec_prepare_fdt() Simon Glass
[U-Boot] [PATCH 05/82] console: Don't enable CONFIG-CONSOLE_MUX, etc. in SPL Simon Glass
[U-Boot] [PATCH 06/82] elf: Add the Elf64_Rela type Simon Glass
[U-Boot] [PATCH 07/82] mmc: Fix cast for 64-bit compilation Simon Glass
[U-Boot] [PATCH 08/82] rtc: Use CONFIG_X86 instead of __I386__ Simon Glass
[U-Boot] [PATCH 09/82] spl: spi: Add a debug message if loading fails Simon Glass
[U-Boot] [PATCH 10/82] spl: Makefile: Define SPL_ earlier Simon Glass
[U-Boot] [PATCH 11/82] spl: Allow CPU drivers to be used in SPL Simon Glass
[U-Boot] [PATCH 12/82] spl: Allow PCI drivers to be used in SPL Simon Glass
[U-Boot] [PATCH 13/82] spl: Allow RTC drivers to be used in SPL Simon Glass
[U-Boot] [PATCH 14/82] spl: Allow timer drivers to be used in SPL Simon Glass
[U-Boot] [PATCH 15/82] spl: Allow PCH drivers to be used in SPL Simon Glass
[U-Boot] [PATCH 16/82] spl: Don't create a BSS padding when it is separate Simon Glass
[U-Boot] [PATCH 17/82] tpm: Tidy up use of size_t Simon Glass
[U-Boot] [PATCH 18/82] usb: pci: Fix cast for 64-bit compilation Simon Glass
[U-Boot] [PATCH 19/82] video: Use ulong for video frame buffer address Simon Glass
[U-Boot] [PATCH 20/82] x86: Allow interrupts to be disabled in 64-bit mode Simon Glass
[U-Boot] [PATCH 21/82] x86: Correct address casts in cpu code Simon Glass
[U-Boot] [PATCH 22/82] x86: Correct address casts in interrupt code Simon Glass
[U-Boot] [PATCH 23/82] x86: Use unsigned long for address in table generation Simon Glass
[U-Boot] [PATCH 24/82] WIP: x86: Update mpspec to build on 64-bit machines Simon Glass
[U-Boot] [PATCH 25/82] x86: Add basic support for U-Boot as a 64-bit EFI application Simon Glass
[U-Boot] [PATCH 26/82] x86: ivybridge: Declare global data where it is used Simon Glass
[U-Boot] [PATCH 27/82] x86: i2c: Fix cast of address to 32-bit value Simon Glass
[U-Boot] [PATCH 28/82] x86: Don't export interrupt handlers with x86_64 Simon Glass
[U-Boot] [PATCH 29/82] x86: ivybridge: Add more debugging for failures Simon Glass
[U-Boot] [PATCH 30/82] x86: ivybridge: Fix types for 64-bit compilation Simon Glass
[U-Boot] [PATCH 31/82] x86: ivybridge: Fix PCH power setup Simon Glass
[U-Boot] [PATCH 32/82] x86: ivybridge: Tidy up enable_clock_gating() for 64-bit Simon Glass
[U-Boot] [PATCH 33/82] x86: dts: Mark serial as needed before relocation Simon Glass
[U-Boot] [PATCH 34/82] x86: fsp: Fix cast for 64-bit compilation Simon Glass
[U-Boot] [PATCH 35/82] x86: Drop unused init_helper functions Simon Glass
[U-Boot] [PATCH 36/82] x86: lib: Fix types and casts for 64-bit compilation Simon Glass
[U-Boot] [PATCH 37/82] x86: mrccache: Fix error handling in mrccache_get_region() Simon Glass
[U-Boot] [PATCH 38/82] x86: Add Kconfig options to build 64-bit U-Boot Simon Glass
[U-Boot] [PATCH 39/82] x86: Kconfig: Add location options for 16/32-bit init Simon Glass
[U-Boot] [PATCH 40/82] x86: Use X86_16BIT_INIT instead of X86_RESET_VECTOR Simon Glass
[U-Boot] [PATCH 41/82] x86: Use X86_32BIT_INIT instead of X86_RESET_VECTOR Simon Glass
[U-Boot] [PATCH 42/82] x86: ivybridge: Allow 32-bit init to move to SPL Simon Glass
[U-Boot] [PATCH 43/82] x86: Add 64-bit start-up code Simon Glass
[U-Boot] [PATCH 44/82] x86: board_f: Update init sequence for 64-bit startup Simon Glass
[U-Boot] [PATCH 45/82] x86: board_r: Set the global data pointer after relocation Simon Glass
[U-Boot] [PATCH 46/82] x86: Do relocation before clearing BSS Simon Glass
[U-Boot] [PATCH 47/82] x86: Refactor relocation to prepare for 64-bit Simon Glass
[U-Boot] [PATCH 48/82] x86: Add support for 64-bit relocation Simon Glass
[U-Boot] [PATCH 49/82] x86: Tidy up use of size_t in relocation Simon Glass
[U-Boot] [PATCH 50/82] x86: Add an SPL implementation Simon Glass
[U-Boot] [PATCH 51/82] x86: Move the i386 code into its own directory Simon Glass
[U-Boot] [PATCH 52/82] x86: Add cpu code for x86_64 Simon Glass
[U-Boot] [PATCH 53/82] x86: Support global_data on x86_64 Simon Glass
[U-Boot] [PATCH 54/82] x86: Fix up CONFIG_X86_64 check Simon Glass
[U-Boot] [PATCH 55/82] x86: Add a link script for 64-bit x86 Simon Glass
[U-Boot] [PATCH 56/82] x86: Add a link script for SPL Simon Glass
[U-Boot] [PATCH 57/82] x86: Add SPL build rules for start-up code Simon Glass
[U-Boot] [PATCH 58/82] x86: Fix up byteorder.h for x86_64 Simon Glass
[U-Boot] [PATCH 59/82] x86: Drop flag_is_changable() on x86_64 Simon Glass
[U-Boot] [PATCH 60/82] x86: Fix up type sizes for 64-bit Simon Glass
[U-Boot] [PATCH 61/82] x86: Mention the MRC region in the README Simon Glass
[U-Boot] [PATCH 62/82] x86: ivybridge: Only do graphics init in 32-bit mode Simon Glass
[U-Boot] [PATCH 63/82] x86: ivybridge: Skipt SATA init in SPL Simon Glass
[U-Boot] [PATCH 64/82] x86: ivybridge: Provide a dummy SDRAM init for 64-bit Simon Glass
[U-Boot] [PATCH 65/82] x86: Don't try to run the VGA BIOS in 64-bit mode Simon Glass
[U-Boot] [PATCH 66/82] x86: Don't build call64 and setjmp on 64-bit Simon Glass
[U-Boot] [PATCH 67/82] x86: Don't build cpu files which are not supported on 64-bit Simon Glass
[U-Boot] [PATCH 68/82] x86: Don't try to boot Linux from SPL Simon Glass
[U-Boot] [PATCH 69/82] x86: Drop interrupt support in 64-bit mode Simon Glass
[U-Boot] [PATCH 70/82] x86: Support jumping from SPL to U-Boot Simon Glass
[U-Boot] [PATCH 71/82] x86: Move pirq_routing_table to global_data Simon Glass
[U-Boot] [PATCH 72/82] x86: Move turbo_state to global_data Simon Glass
[U-Boot] [PATCH 73/82] x86: Change irq_already_routed to a local variable Simon Glass
[U-Boot] [PATCH 74/82] x86: Move call64 to the i386 directory Simon Glass
[U-Boot] [PATCH 75/82] x86: Move setjmp to the i386 directory Simon Glass
[U-Boot] [PATCH 76/82] x86: Add a dummy setjmp implementation for x86_64 Simon Glass
[U-Boot] [PATCH 77/82] x86: link: Add a text base for 64-bit U-Boot Simon Glass
[U-Boot] [PATCH 78/82] x86: link: Add SPL declarations to the binman image Simon Glass
[U-Boot] [PATCH 79/82] x86: link: Set up device tree for SPL Simon Glass
[U-Boot] [PATCH 80/82] x86: link: Add build options for SPL Simon Glass
[U-Boot] [PATCH 81/82] x86: Update compile/link flags to support 64-bit U-Boot Simon Glass
[U-Boot] [PATCH 82/82] x86: link: Switch to 64-bit U-Boot Simon Glass
[U-Boot] [PATCH] Kconfig: update FASTBOOT_FLASH_MMC_DEV Simon Glass
[U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program Simon Glass
[U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL Simon Glass
[U-Boot] [PATCH v3 3/3] config_whitelist: remove bogus options Simon Glass
[U-Boot] [PATCH 1/9] gpio: bcm2835: add device tree support Simon Glass
[U-Boot] [PATCH 1/9] patman: Replace tabs with spaces Simon Glass
[U-Boot] [PATCH 2/9] patman: Make print statements python 3.x safe Simon Glass
[U-Boot] [PATCH 3/9] patman: Make exception handling python 3.x safe Simon Glass
[U-Boot] [PATCH 4/9] patman: Import 'configparser' lower case to be python 3.x safe Simon Glass
[U-Boot] [PATCH 5/9] patman: Decode stdout/stderr as utf8, be python 3.x safe Simon Glass
[U-Boot] [PATCH 6/9] patman: Use items() to iterate over dictionaries in python 3.x Simon Glass
[U-Boot] [PATCH 8/9] dtoc: Decode strings for struct.unpack on python 3.x Simon Glass
[U-Boot] [PATCH 9/9] dtoc: Make integer division python 3.x safe Simon Glass
[U-Boot] [PATCH 7/9] dtoc: Use items() to iterate over dictionaries in python 3.x Simon Glass
[U-Boot] [PATCH 0/9] Python 3.x support for patman & dtoc Simon Glass
[U-Boot] [PATCH v4 1/6] dm: i2c: Add u8 read/write i2c functions Simon Glass
[U-Boot] [PATCH v2] mmc: s5p_sdhci: support the Driver model for Exynos Simon Glass
[U-Boot] building u-boot x86 with device tree disabled , still refers to device tree function Simon Glass
[U-Boot] [PATCHv2] scripts: Add script to extract default environment Simon Glass
[U-Boot] [RFC PATCH v1] common/console.c: ensure GD_FLG_SILENT is set or cleared Simon Glass
[U-Boot] [PATCH] mmc: dw_mmc: remove the unnecessary arguments for dwmci_setup_cfg Simon Glass
[U-Boot] [PATCH 1/2] mmc: sdhci: use the host version value in sdhci_setup_cfg Simon Glass
[U-Boot] [PATCH v2 2/2] mmc: sdhci: use the generic error number Simon Glass
[U-Boot] [PATCH] ARM: tegra: fix clock_get_periph_rate() for UART clocks Simon Glass
[U-Boot] [PATCH] ARM: tegra: flush caches via SMC call Simon Glass
[U-Boot] [PATCH 9/9] common/board_f: enable initr_trap for MIPS Simon Glass
[U-Boot] [PATCH 1/5] check-config: fix wrong comment about how to build whitelist Simon Glass
[U-Boot] [PATCH 2/5] kbuild: move no_new_adhoc_configs_check to "all" target command Simon Glass
[U-Boot] [PATCH 3/5] kbuild: make dependencies in scripts/Makefile.autoconf more readable Simon Glass
[U-Boot] [PATCH 4/5] kbuild: generate u-boot.cfg as a byproduct of include/autoconf.mk Simon Glass
[U-Boot] [PATCH 5/5] check-config: allow to complete build even with ad-hoc CONFIG options Simon Glass
[U-Boot] [PATCH 1/2] power: pmic: lp873x: Add the base pmic support Simon Glass
[U-Boot] [PATCH 2/2] power: regulator: lp873x: Add regulator support Simon Glass
[U-Boot] [PATCH v2 1/8] x86: Add implementations of setjmp() and longjmp() Simon Glass
[U-Boot] [PATCH 2/3] ARM: keystone: rename clk_get_rate() to ks_clk_get_rate() Simon Glass
[U-Boot] [PATCH 3/3] Revert "ns16650: Make sure we have CONFIG_CLK set before using infrastructure" Simon Glass
[U-Boot] [PATCH 2/9] serial: bcm283x_mu: add device tree support Simon Glass
[U-Boot] [PATCH 3/9] serial: pl01x: expose skip_init platdata option in DT Simon Glass
[U-Boot] [PATCH 4/9] fdt: add dt-bindings for bcm2835 Simon Glass
[U-Boot] [PATCH 5/9] fdt: import bcm283x device tree sources from the linux kernel tree Simon Glass
[U-Boot] [PATCH 6/9] fdt: adjust bcm283x device tree for u-boot Simon Glass
[U-Boot] [PATCH 7/9] serial: bcm283x_mu: support disabling after initialization Simon Glass
[U-Boot] [PATCH 9/9] ARM: bcm283x: use OF_CONTROL for bcm283x Simon Glass
[U-Boot] [PATCH 8/9] board: rpi: move uart deactivation to board_init Simon Glass
[U-Boot] [PATCH 06/23] pci: Set of_offset for devices not probed via DT compatible strings Simon Glass
[U-Boot] [PATCH 07/23] pci: Handle MIPS systems with virtual CONFIG_SYS_SDRAM_BASE Simon Glass
[U-Boot] [PATCH 08/23] pci: Make PCI bridge memory alignment configurable Simon Glass
[U-Boot] [PATCH 09/23] boston: Disable PCI bridge memory space alignment Simon Glass
[U-Boot] [PATCH 14/23] gpio: Provide dummy get/request & is_valid functions Simon Glass
[U-Boot] [PATCH 16/23] net: pch_gbe: Support PHY reset GPIOs Simon Glass
[U-Boot] [PATCH 15/23] gpio: eg20t: Add driver for Intel EG20T GPIO controllers Simon Glass
[U-Boot] [RFC PATCH 1/2] dm: Add support for scsi/sata based devices Simon Glass
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Simon Glass
[U-Boot] [RFC] Rearrange CONFIG_* macros Simon Glass
[U-Boot] [PATCH 0/9] Python 3.x support for patman & dtoc Simon Glass
[U-Boot] [PATCH v2 06/10] patman: Use items() to iterate over dictionaries Simon Glass
[U-Boot] [PATCH v2 07/10] patman: Fix doctest StringIO import for python 3.x Simon Glass
[U-Boot] [PATCH v2 08/10] dtoc: Use items() to iterate over dictionaries in python 3.x Simon Glass
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Simon Glass
[U-Boot] [PATCH 2/2] power: regulator: lp873x: Add regulator support Simon Glass
[U-Boot] [PATCH v3 1/7] clk: clk-uclass: Assign clk->dev before call .of_xlate Simon Glass
[U-Boot] [PATCH] arm: Add return value argument to longjmp Simon Glass
[U-Boot] [PATCH] clk: rk3399: fix rockchip_get_cru Simon Glass
[U-Boot] ccache and buildman Simon Glass
[U-Boot] [PATCH 15/23] gpio: eg20t: Add driver for Intel EG20T GPIO controllers Simon Glass
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Simon Glass
[U-Boot] [PATCHv2] scripts: Add script to extract default environment Simon Glass
[U-Boot] [PATCH] rockchip: enable SPL_OF_PLATDATA for rk3288 board Simon Glass
[U-Boot] [PATCH v2 11/12] RFC: Use binman for a sunxi board Simon Glass
[U-Boot] ccache and buildman Simon Glass
[U-Boot] [PATCH v5 2/6] power: pmic: Palmas: Add the base pmic support Simon Glass
[U-Boot] [PATCH v2 1/2] power: pmic: lp873x: Add the base pmic support Simon Glass
[U-Boot] [PATCH v2 2/2] power: regulator: lp873x: Add regulator support Simon Glass
[U-Boot] [PATCH 2/2] power: regulator: lp873x: Add regulator support Simon Glass
[U-Boot] [RFC v2] bootm: fix passing argc to standalone apps Simon Glass
[U-Boot] [PATCH] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC Simon Glass
[U-Boot] ccache and buildman Simon Glass
[U-Boot] [RFC] Rearrange CONFIG_* macros Simon Glass
[U-Boot] [PATCH v3 00/29] Kconfig: Move console options to Kconfig Simon Glass
[U-Boot] [PATCH v3 01/29] Remove some merge markers Simon Glass
[U-Boot] [PATCH v3 02/29] Convert SILENT_CONSOLE options to Kconfig Simon Glass
[U-Boot] [PATCH v3 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig Simon Glass
[U-Boot] [PATCH v3 04/29] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV et al to Kconfig Simon Glass
[U-Boot] [PATCH v3 05/29] config: Drop CONFIG_CONSOLE Simon Glass
[U-Boot] [PATCH v3 06/29] config: Drop CONFIG_CONSOLE_DEV Simon Glass
[U-Boot] [PATCH v3 07/29] Convert CONFIG_VIDEO to Kconfig Simon Glass
[U-Boot] [PATCH v3 08/29] Convert CONFIG_CFB_CONSOLE to Kconfig Simon Glass
[U-Boot] [PATCH v3 09/29] Convert CONFIG_CFB_CONSOLE_ANSI to Kconfig Simon Glass
[U-Boot] [PATCH v3 10/29] Convert CONFIG_VIDEO_CT69000 to Kconfig Simon Glass
[U-Boot] [PATCH v3 11/29] Convert CONFIG_SYS_CONSOLE_BG_COL et al to Kconfig Simon Glass
[U-Boot] [PATCH v3 12/29] video: Drop the smiLynxEM driver Simon Glass
[U-Boot] [PATCH v3 13/29] video: Drop the imx25lcdc driver Simon Glass
[U-Boot] [PATCH v3 14/29] video: Drop the s3c-fb driver Simon Glass
[U-Boot] [PATCH v3 15/29] video: Drop the sed13806 driver Simon Glass
[U-Boot] [PATCH v3 16/29] Convert CONFIG_VGA_AS_SINGLE_DEVICE to Kconfig Simon Glass
[U-Boot] [PATCH v3 17/29] video: Drop CONFIG_VIDEO_HW_CURSOR Simon Glass
[U-Boot] [PATCH v3 18/29] Convert CONFIG_VIDEO_SW_CURSOR to Kconfig Simon Glass
[U-Boot] [PATCH v3 19/29] video: Drop CONFIG_VIDEO_SW_CURSOR Simon Glass
[U-Boot] [PATCH v3 20/29] Convert CONFIG_CONSOLE_EXTRA_INFO to Kconfig Simon Glass
[U-Boot] [PATCH v3 21/29] video: Move video_get_info_str() prototype to a header file Simon Glass
[U-Boot] [PATCH v3 22/29] video: Drop CONFIG_CONSOLE_INFO_QUIET Simon Glass
[U-Boot] [PATCH v3 23/29] Convert CONFIG_LCD to Kconfig Simon Glass
[U-Boot] [PATCH v3 24/29] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig Simon Glass
[U-Boot] [PATCH v3 25/29] Convert CONFIG_SYS_CONSOLE_ENV_OVERWRITE to Kconfig Simon Glass
[U-Boot] [PATCH v3 26/29] Convert CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE to Kconfig Simon Glass
[U-Boot] [PATCH v3 27/29] Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig Simon Glass
[U-Boot] [PATCH v3 28/29] Convert CONFIG_USB_KEYBOARD to Kconfig Simon Glass
[U-Boot] [PATCH v3 29/29] Convert CONFIG_SYS_STDIO_DEREGISTER to Kconfig Simon Glass
[U-Boot] [PATCH] x86: Fix Linux v4.7+ zimage booting (update bootparam.h) Simon Glass
[U-Boot] [PATCH v5 2/6] power: pmic: Palmas: Add the base pmic support Simon Glass
[U-Boot] [PATCH] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC Simon Glass
[U-Boot] [PATCH 0/6] sunxi: sun5/7i: add the psci suspend function Hans de Goede
[U-Boot] [PATCH 3/6] ARM: PSCI: protect GIC specific code with ARM_GIC Hans de Goede
[U-Boot] [PATCH 6/6] sun5i: boot in HYP mode by default Hans de Goede
[U-Boot] [PATCH] sunxi: Fix H3 EMAC syscon register address Hans de Goede
[U-Boot] [PATCH v2] sunxi: Add support for A33-OLinuXino board Hans de Goede
[U-Boot] Please pull u-boot-sunxi master (v2016.09 fixes) Hans de Goede
[U-Boot] [PATCH 1/3] sunxi: Sync h3-orangepi dts files with kernel Hans de Goede
[U-Boot] [PATCH 2/3] sunxi: Enable emac on H3 orangepi boards Hans de Goede
[U-Boot] [PATCH 3/3] sunxi: Add defconfig and dts file for the Orange Pi Plus2E SBC Hans de Goede
[U-Boot] Please pull u-boot-sunxi master (v2016.09 fixes) Hans de Goede
[U-Boot] [PATCH 0/4] sunxi: Pine64 fixes Hans de Goede
[U-Boot] [PATCH 0/4] sunxi: Pine64 fixes Hans de Goede
[U-Boot] [PATCH 0/4] sunxi: Pine64 fixes Hans de Goede
[U-Boot] [PATCH 1/3] sunxi: Sync h3-orangepi dts files with kernel Hans de Goede
[U-Boot] Sdcard boot for a generic allwinner q8 clone A33 tablet not work. Hans de Goede
[U-Boot] u-boot v2016.09-rc2: cache alignment issues on sunxi-based systems Hans de Goede
[U-Boot] [PATCH] sunxi: axp2xx: disable ldoio0/1 at boot Hans de Goede
[U-Boot] [PATCH] sunxi: axp2xx: disable ldoio0/1 at boot Hans de Goede
[U-Boot] [PATCH v2] sunxi: axp2xx: disable ldoio0/1 at boot Hans de Goede
[U-Boot] [bug report] sunxi: booting from eMMC Hans de Goede
[U-Boot] [bug report] sunxi: booting from eMMC Hans de Goede
[U-Boot] [PATCH] sunxi: musb: Power off OTG port VBUS when disabled Hans de Goede
[U-Boot] [PATCH 2/3] sunxi: Enable USB host support for Sinlinx SinA33 Hans de Goede
[U-Boot] [PATCH] sunxi: musb: Re-init musb controller on repeated probe calls Hans de Goede
[U-Boot] Please pull u-boot-sunxi master Hans de Goede
[U-Boot] [PATCH] sunxi: musb: Re-init musb controller on repeated probe calls Hans de Goede
[U-Boot] [PATCH] A20-OLinuXino-Lime2: Enable USB gadget support Hans de Goede
[U-Boot] [PATCH] A20-OLinuXino-Lime2: Enable USB gadget support Hans de Goede
[U-Boot] [bug report] sunxi: booting from eMMC Hans de Goede
[U-Boot] [PATCH] armv8: ls1043a: Extend the size for SPL Q.Y. Gong
[U-Boot] [PATCH] armv8: ls1043a: Extend the size for SPL Q.Y. Gong
[U-Boot] [Patch v6 5/9] armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r Q.Y. Gong
[U-Boot] [Patch v6 5/9] armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r Q.Y. Gong
[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support Q.Y. Gong
[U-Boot] [Patch v2 7/7] armv8: ls1046ardb: Add LS1046ARDB board support Qianyu Gong
[U-Boot] [PATCH v2 0/4] ARM: move ARMV7_PSCI and ARMV7_PSCI_NR_CPUS to Kconfig Alexander Graf
[U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel Alexander Graf
[U-Boot] ZynqMP breakage Alexander Graf
[U-Boot] ZynqMP breakage Alexander Graf
[U-Boot] [PATCH] efi_loader: Allow bouncing for network Alexander Graf
[U-Boot] ZynqMP breakage Alexander Graf
[U-Boot] [PATCH] efi_loader: Fix crash on 32-bit systems Alexander Graf
[U-Boot] [PATCH] efi: console: Correctly report modes Alexander Graf
[U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one Alexander Graf
[U-Boot] [PATCH v6 1/2] armv8: Support loading 32-bit OS in AArch32 execution state Alexander Graf
[U-Boot] [PATCH v6 2/2] armv8: fsl-layerscape: SMP support for loading 32-bit OS Alexander Graf
[U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one Alexander Graf
[U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one Alexander Graf
[U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one Alexander Graf
[U-Boot] [PATCH v2 1/8] x86: Add implementations of setjmp() and longjmp() Alexander Graf
[U-Boot] [PATCH v2 1/8] x86: Add implementations of setjmp() and longjmp() Alexander Graf
[U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program Alexander Graf
[U-Boot] [PATCH] arm: Add return value argument to longjmp Alexander Graf
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Alexander Graf
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Alexander Graf
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Alexander Graf
[U-Boot] [PATCH 2/6] efi_loader: Fix memory map size check to avoid out-of-bounds access Alexander Graf
[U-Boot] [PATCH 3/6] efi_loader: Track size of pool allocations to allow freeing Alexander Graf
[U-Boot] [PATCH 4/6] efi_loader: Readd freed pages to memory pool Alexander Graf
[U-Boot] [PATCH 5/6] efi_loader: Keep memory mapping sorted when splitting an entry Alexander Graf
[U-Boot] [PATCH 6/6] efi_loader: Do not leak memory when unlinking a mapping Alexander Graf
[U-Boot] [PATCH 2/6] efi_loader: Fix memory map size check to avoid out-of-bounds access Alexander Graf
[U-Boot] [PATCH] compiler.h: use system endian macros on OpenBSD Jonathan Gray
[U-Boot] [PATCH] image-fit: switch ENOLINK to ENOENT Jonathan Gray
[U-Boot] image-fit: switch ENOLINK to ENOENT Jonathan Gray
[U-Boot] image-fit: switch ENOLINK to ENOENT Jonathan Gray
[U-Boot] image-fit: switch ENOLINK to ENOENT Jonathan Gray
[U-Boot] image-fit: switch ENOLINK to ENOENT Jonathan Gray
[U-Boot] [PATCH] image-fit: switch ENOLINK to ENOENT Jonathan Gray
[U-Boot] [PATCH] Revert "image-fit: switch ENOLINK to ENOENT" Jonathan Gray
[U-Boot] [PATCH] Revert "image-fit: switch ENOLINK to ENOENT" Jonathan Gray
[U-Boot] [PATCH] armv8: ls1043a: Extend the size for SPL Ruchika Gupta
[U-Boot] [PATCH V2 2/8] imx: mx6: Add plugin support Utkarsh Gupta
[U-Boot] [PATCH v2 2/7] video: squash lines for immediate return Anatolij Gustschin
[U-Boot] [PATCH v1 2/5] simple panel: fix spelling of debug message Anatolij Gustschin
[U-Boot] [PATCH 1/2] at91: video: Support driver-model for the HLCD driver Anatolij Gustschin
[U-Boot] [PATCH 2/2] at91: video: DT binding for HLCDC driver Anatolij Gustschin
[U-Boot] [PATCH 1/2] at91: video: Support driver-model for the HLCD driver Anatolij Gustschin
[U-Boot] ddr: Invalid SPD module type definitions for SO-DIMM with ECC Ralf Göbel
[U-Boot] Patch v1 - Update to support MSCC VSC8530/31 and VSC8540/41 PHY's John Haechten
[U-Boot] [arm] Where to put files for armv8 ThunderX Tim Harvey
[U-Boot] [PATCH v1 1/2] net: Add support for mv88e609x switches Joe Hershberger
[U-Boot] [PATCH v1 2/2] net: mv88e61xx: Add support for fixed links Joe Hershberger
[U-Boot] [PATCH] net: write enetaddr down to hardware on env_callback Joe Hershberger
[U-Boot] [PATCH 1/2] rtl8169: fix cache misalignment message on transmit. Joe Hershberger
[U-Boot] [PATCH 2/2] Fix cache misalignment after network load operations Joe Hershberger
[U-Boot] [PATCH 8/9] net: nfs: Use the tx buffer to construct rpc msgs Joe Hershberger
[U-Boot] [PATCH] net: asix: Fix AX88772B when used with DriverModel Joe Hershberger
[U-Boot] [PATCH] net: mvneta: fix typo in comment Joe Hershberger
[U-Boot] Pull request: u-boot-net.git master Joe Hershberger
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Joe Hershberger
[U-Boot] [PATCH] Revert "net: asix: Fix AX88772B when used with DriverModel" Joe Hershberger
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Joe Hershberger
[U-Boot] [PATCH] colibri_t30: fix usb ethernet functionality Joe Hershberger
[U-Boot] [PATCH v2] net: asix: Fix ASIX 88772B with driver model Joe Hershberger
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Joe Hershberger
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Joe Hershberger
[U-Boot] [PATCH v2] apalis_t30: colibri_imx7: colibri_t30: fix ethernet functionality Joe Hershberger
[U-Boot] [PATCH] net: smsc95xx: fix DM MAC address reading Joe Hershberger
[U-Boot] [PATCH 03/15] net: mvneta: Make driver 64bit safe Joe Hershberger
[U-Boot] [PATCH 04/15] net: mvneta: Add support for Armada 3700 SoC Joe Hershberger
[U-Boot] [PATCH 03/15] net: mvneta: Make driver 64bit safe Joe Hershberger
[U-Boot] [PATCH 04/15 v2] net: mvneta: Add support for Armada 3700 SoC Joe Hershberger
[U-Boot] [PATCH] net: smsc95xx: fix DM MAC address reading Joe Hershberger
[U-Boot] Patch v1 - Update to support MSCC VSC8530/31 and VSC8540/41 PHY's Joe Hershberger
[U-Boot] [PATCH] test: add NFS download test Joe Hershberger
[U-Boot] [PATCH v3] net: Fix cache misalignment message after network load operations Joe Hershberger
[U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device Joe Hershberger
[U-Boot] [PATCH RESEND] phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID Joe Hershberger
[U-Boot] [PATCH RESEND] phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID Joe Hershberger
[U-Boot] [PATCH RESEND] phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID Joe Hershberger
[U-Boot] [PATCH v5 06/21] imx6: icorem6: Add ENET support Joe Hershberger
[U-Boot] [PATCH RESEND] phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID Joe Hershberger
[U-Boot] [PATCH v5 06/21] imx6: icorem6: Add ENET support Joe Hershberger
[U-Boot] [PATCH v5 06/21] imx6: icorem6: Add ENET support Joe Hershberger
[U-Boot] [PATCH v5 06/21] imx6: icorem6: Add ENET support Joe Hershberger
[U-Boot] [PATCH] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Sudeep Holla
[U-Boot] [PATCH] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Sudeep Holla
[U-Boot] [PATCH v2] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Sudeep Holla
[U-Boot] [PATCH v2] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Sudeep Holla
[U-Boot] [PATCH v2] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Sudeep Holla
[U-Boot] [PATCH v2] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Sudeep Holla
[U-Boot] [PATCH v2] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Sudeep Holla
[U-Boot] [PATCH 1/2] armv8/fsl-lsch2: refactor the clock system initialization Z.Q. Hou
[U-Boot] [PATCH 2/2] armv8/fsl-lsch3: consolidate the clock system initialization Z.Q. Hou
[U-Boot] [PATCH 2/2] armv8/fsl-lsch3: consolidate the clock system initialization Z.Q. Hou
[U-Boot] [PATCH 2/2] armv8/fsl-lsch3: consolidate the clock system initialization Z.Q. Hou
[U-Boot] [PATCH 4/7] Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig option Z.Q. Hou
[U-Boot] [Patch v2 0/7] Add LS1046ARDB board support Zhiqiang Hou
[U-Boot] [PATCH] ARMv8/sec-firmware: fix a compile error Zhiqiang Hou
[U-Boot] [PATCH 1/2] armv8/fsl-lsch2: refactor the clock system initialization Zhiqiang Hou
[U-Boot] [PATCH 2/2] armv8/fsl-lsch3: consolidate the clock system initialization Zhiqiang Hou
[U-Boot] [PATCHv2 1/2] armv8/fsl-lsch2: refactor the clock system initialization Zhiqiang Hou
[U-Boot] [PATCHv2 2/2] armv8/fsl-lsch3: consolidate the clock system initialization Zhiqiang Hou
[U-Boot] [PATCH] armv8/fsl-lsch2: Implement workaround for PIN MUX erratum A010539 Zhiqiang Hou
[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support Mingkai Hu
[U-Boot] [PATCH 00/12] sh: change arch and boards code to generic board Nobuhiro Iwamatsu
[U-Boot] [PATCH] tools: imximage: use 'new style' header length for imximage v1 Martin Kaiser
[U-Boot] [RFC] bootm: fix passing argc to standalone apps Zubair Lutfullah Kakakhel
[U-Boot] [RFC] bootm: fix passing argc to standalone apps Zubair Lutfullah Kakakhel
[U-Boot] [RFC v2] bootm: fix passing argc to standalone apps Zubair Lutfullah Kakakhel
[U-Boot] [RFC v2] bootm: fix passing argc to standalone apps Zubair Lutfullah Kakakhel
[U-Boot] [PATCH v3 7/8] arch, board: squash lines for immediate return Minkyu Kang
[U-Boot] [PATCH 14/28] video: Drop the s3c-fb driver Minkyu Kang
[U-Boot] [PATCH v2 1/2] mmc: sdhci: use the host version value in sdhci_setup_cfg Minkyu Kang
[U-Boot] [PATCH] efi_loader: provide efi_mem_desc version Mian Yousaf Kaukab
[U-Boot] [PATCH] efi_loader: provide efi_mem_desc version Mian Yousaf Kaukab
[U-Boot] [PATCH v3 3/5] regulator: fixed: honour optionality of enable gpio John Keeping
[U-Boot] [PATCH] fastboot: avoid printing invalid data John Keeping
[U-Boot] [PATCH 0/5] power: pmic: Add support for Palmas family of PMICs Keerthy
[U-Boot] [PATCH 1/5] power: regulator: Add ctrl_reg and volt_reg fields for pmic Keerthy
[U-Boot] [PATCH 2/5] power: pmic: Palmas: Add the base pmic support Keerthy
[U-Boot] [PATCH 3/5] power: regulator: palmas: Add regulator support Keerthy
[U-Boot] [PATCH 4/5] configs: am57xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH 5/5] configs: dra7xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH 0/6] ARM: Introduce function to switch to hypervisor mode and enable LPAE Keerthy
[U-Boot] [PATCH 1/6] omap: Remove hardcoding of mmu section shift to 20 Keerthy
[U-Boot] [PATCH 2/6] omap: Set appropriate cache configuration for LPAE and non-LAPE cases Keerthy
[U-Boot] [PATCH 3/6] configs: am57xx_evm_defconfig: Enable LPAE mode Keerthy
[U-Boot] [PATCH 4/6] configs: dra7xx_evm_defconfig: Enable LPAE mode Keerthy
[U-Boot] [PATCH 5/6] ARM: Introduce function to switch to hypervisor mode Keerthy
[U-Boot] [PATCH 6/6] ARM: OMAP5+: Override switch_to_hypervisor function Keerthy
[U-Boot] [PATCH 1/5] power: regulator: Add ctrl_reg and volt_reg fields for pmic Keerthy
[U-Boot] [PATCH 1/5] power: regulator: Add ctrl_reg and volt_reg fields for pmic Keerthy
[U-Boot] [PATCH] power: regulator: Add support for gpio regulators Keerthy
[U-Boot] [PATCH] power: regulator: Add limits checking while setting voltage and current Keerthy
[U-Boot] [PATCH] power: regulator: Add support for gpio regulators Keerthy
[U-Boot] [PATCH] power: regulator: Add limits checking while setting voltage and current Keerthy
[U-Boot] [PATCH] power: regulator: Add limits checking while setting voltage and current Keerthy
[U-Boot] [PATCH v2] power: regulator: Add support for gpio regulators Keerthy
[U-Boot] [PATCH] power: regulator: Add support for gpio regulators Keerthy
[U-Boot] [PATCH 3/5] power: regulator: palmas: Add regulator support Keerthy
[U-Boot] [PATCH v2 0/5] power: pmic: Add support for Palmas family of PMICs Keerthy
[U-Boot] [PATCH v2 1/5] power: regulator: Add ctrl_reg and volt_reg fields for pmic Keerthy
[U-Boot] [PATCH v2 2/5] power: pmic: Palmas: Add the base pmic support Keerthy
[U-Boot] [PATCH v2 3/5] power: regulator: palmas: Add regulator support Keerthy
[U-Boot] [PATCH v2 4/5] configs: am57xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH v2 5/5] configs: dra7xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH v2 3/5] power: regulator: palmas: Add regulator support Keerthy
[U-Boot] [PATCH v3 0/6] power: pmic: Add support for Palmas family of PMICs Keerthy
[U-Boot] [PATCH v3 1/6] dm: i2c: Add u8 read/write i2c functions Keerthy
[U-Boot] [PATCH v3 2/6] power: regulator: Add ctrl_reg and volt_reg fields for pmic Keerthy
[U-Boot] [PATCH v3 3/6] power: pmic: Palmas: Add the base pmic support Keerthy
[U-Boot] [PATCH v3 4/6] power: regulator: palmas: Add regulator support Keerthy
[U-Boot] [PATCH v3 5/6] configs: am57xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH v3 6/6] configs: dra7xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH v3 1/6] dm: i2c: Add u8 read/write i2c functions Keerthy
[U-Boot] [PATCH v3 3/6] power: pmic: Palmas: Add the base pmic support Keerthy
[U-Boot] [PATCH v3 2/6] power: regulator: Add ctrl_reg and volt_reg fields for pmic Keerthy
[U-Boot] [PATCH v4 0/6] power: pmic: Add support for Palmas family of PMICs Keerthy
[U-Boot] [PATCH v4 1/6] dm: i2c: Add u8 read/write i2c functions Keerthy
[U-Boot] [PATCH v4 2/6] power: regulator: Add ctrl_reg and volt_reg fields for pmic Keerthy
[U-Boot] [PATCH v4 3/6] power: pmic: Palmas: Add the base pmic support Keerthy
[U-Boot] [PATCH v4 4/6] power: regulator: palmas: Add regulator support Keerthy
[U-Boot] [PATCH v4 5/6] configs: dra7xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH v4 6/6] configs: am57xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH 0/2] power: pmic: Add support for LP873X family of PMICs Keerthy
[U-Boot] [PATCH 1/2] power: pmic: lp873x: Add the base pmic support Keerthy
[U-Boot] [PATCH 2/2] power: regulator: lp873x: Add regulator support Keerthy
[U-Boot] [PATCH v4 1/6] dm: i2c: Add u8 read/write i2c functions Keerthy
[U-Boot] [PATCH 1/2] power: pmic: lp873x: Add the base pmic support Keerthy
[U-Boot] [PATCH 2/2] power: regulator: lp873x: Add regulator support Keerthy
[U-Boot] [PATCH 2/2] power: regulator: lp873x: Add regulator support Keerthy
[U-Boot] [PATCH v4 4/6] power: regulator: palmas: Add regulator support Keerthy
[U-Boot] [PATCH v5 0/6] power: pmic: Add support for Palmas family of PMICs Keerthy
[U-Boot] [PATCH v5 1/6] power: regulator: Add ctrl_reg and volt_reg fields for pmic Keerthy
[U-Boot] [PATCH v5 2/6] power: pmic: Palmas: Add the base pmic support Keerthy
[U-Boot] [PATCH v5 3/6] power: regulator: palmas: Add regulator support Keerthy
[U-Boot] [PATCH v5 4/6] configs: dra7xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH v5 5/6] configs: am57xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH v5 6/6] configs: am57xx_evm_defconfig: Enable CMD_REG option Keerthy
[U-Boot] [PATCH v5 0/6] power: pmic: Add support for Palmas family of PMICs Keerthy
[U-Boot] [PATCH v2 0/2] power: pmic: Add support for LP873X family of PMICs Keerthy
[U-Boot] [PATCH v2 1/2] power: pmic: lp873x: Add the base pmic support Keerthy
[U-Boot] [PATCH v2 2/2] power: regulator: lp873x: Add regulator support Keerthy
[U-Boot] [PATCH 2/2] power: regulator: lp873x: Add regulator support Keerthy
[U-Boot] [PATCH v5 2/6] power: pmic: Palmas: Add the base pmic support Keerthy
[U-Boot] [PATCH v5 2/6] power: pmic: Palmas: Add the base pmic support Keerthy
[U-Boot] [PATCH v5 2/6] power: pmic: Palmas: Add the base pmic support Keerthy
[U-Boot] [PATCH v6 0/6] power: pmic: Add support for Palmas family of PMICs Keerthy
[U-Boot] [PATCH v6 1/6] power: regulator: Add ctrl_reg and volt_reg fields for pmic Keerthy
[U-Boot] [PATCH v6 2/6] power: pmic: Palmas: Add the base pmic support Keerthy
[U-Boot] [PATCH v6 3/6] power: regulator: palmas: Add regulator support Keerthy
[U-Boot] [PATCH v6 4/6] configs: dra7xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH v6 5/6] configs: am57xx_evm_defconfig: Enable PALMAS options Keerthy
[U-Boot] [PATCH v6 6/6] configs: am57xx_evm_defconfig: Enable CMD_REG option Keerthy
[U-Boot] [PATCH v3 0/2] power: pmic: Add support for LP873X family of PMICs Keerthy
[U-Boot] [PATCH v3 1/2] power: pmic: lp873x: Add the base pmic support Keerthy
[U-Boot] [PATCH v3 2/2] power: regulator: lp873x: Add regulator support Keerthy
[U-Boot] [PATCH] imx: mx6: fix USB bmode to use reserved value Troy Kisky
[U-Boot] [PATCH 1/2] fastboot: more support for reboot-bootloader command Paul Kocialkowski
[U-Boot] [PATCH] i.MX6 nand bootupdate, reworked Sergey Kubushyn
[U-Boot] [PATCH] i.MX6 nand bootupdate, reworked Sergey Kubushyn
[U-Boot] Building u-boot.imx and SPL simultaneously Petr Kulhavy
[U-Boot] Building u-boot.imx and SPL simultaneously Petr Kulhavy
[U-Boot] Building u-boot.imx and SPL simultaneously Petr Kulhavy
[U-Boot] Building u-boot.imx and SPL simultaneously Petr Kulhavy
[U-Boot] Building u-boot.imx and SPL simultaneously Petr Kulhavy
[U-Boot] [PATCH 0/3] Fastboot MBR and generic partition support Petr Kulhavy
[U-Boot] [PATCH 1/3] disk: part: implement generic function part_get_info_by_name() Petr Kulhavy
[U-Boot] [PATCH 2/3] fastboot: add support for writing MBR Petr Kulhavy
[U-Boot] [PATCH 3/3] disk: part: refactor generic name creation for DOS and ISO Petr Kulhavy
[U-Boot] [PATCH v2 0/4] Fastboot MBR and generic partition support Petr Kulhavy
[U-Boot] [PATCH v2 1/4] disk: part: implement generic function part_get_info_by_name() Petr Kulhavy
[U-Boot] [PATCH v2 2/4] fastboot: add support for writing MBR Petr Kulhavy
[U-Boot] [PATCH v2 3/4] disk: part: refactor generic name creation for DOS and ISO Petr Kulhavy
[U-Boot] [PATCH v2 4/4] fastboot: move FASTBOOT_FLASH options into Kconfig Petr Kulhavy
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Prabhakar Kushwaha
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Prabhakar Kushwaha
[U-Boot] [PATCH v3 2/2] pbl: use "wait" command instead of "flush" command Prabhakar Kushwaha
[U-Boot] [PATCH v3 1/2] Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand. Prabhakar Kushwaha
[U-Boot] [PATCH 1/2][v2] arch: powerpc: update the IFC IP input clock Prabhakar Kushwaha
[U-Boot] [PATCH 2/2][v2] arch: arm: update the IFC IP input clock Prabhakar Kushwaha
[U-Boot] [PATCH] arch: powerpc: update the eLBC IP input clock Prabhakar Kushwaha
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Prabhakar Kushwaha
[U-Boot] [PATCH v2] fsl-ifc-nand : Corrected the programming of chip select Prabhakar Kushwaha
[U-Boot] [PATCH] armv8: ls1043a: Extend the size for SPL Prabhakar Kushwaha
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Prabhakar Kushwaha
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Prabhakar Kushwaha
[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support Prabhakar Kushwaha
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Prabhakar Kushwaha
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Prabhakar Kushwaha
[U-Boot] [PATCH 1/2] armv8/fsl-lsch2: refactor the clock system initialization Prabhakar Kushwaha
[U-Boot] [PATCH 2/2] armv8/fsl-lsch3: consolidate the clock system initialization Prabhakar Kushwaha
[U-Boot] [PATCH 2/2] armv8/fsl-lsch3: consolidate the clock system initialization Prabhakar Kushwaha
[U-Boot] [PATCH 2/2] armv8/fsl-lsch3: consolidate the clock system initialization Prabhakar Kushwaha
[U-Boot] [RFC Patch 2/5] driver: ddr: fsl_mmdc: Pass board parameters through data structure Prabhakar Kushwaha
[U-Boot] [RFC Patch 0/5] Resolve conflict for merging Prabhakar Kushwaha
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Prabhakar Kushwaha
[U-Boot] [PATCH] arch: powerpc: Remove unused dts frequency fixup for lbc_clk Prabhakar Kushwaha
[U-Boot] [PATCH] sunxi: Fix H3 DRAM impedance calibration on rev. A chips Jens Kuske
[U-Boot] [PATCH] sunxi: Fix H3 DRAM impedance calibration on rev. A chips Jens Kuske
[U-Boot] [PATCH] sunxi: Fix H3 DRAM impedance calibration on rev. A chips Jens Kuske
[U-Boot] [PATCH 00/10] Add support for Rockchip RK3288 Ethernet Norbert Lange
[U-Boot] [PATCH] MIPS: Hang if run on a secondary CPU Langer, Thomas
[U-Boot] Standalone Application Matthew Larkin
[U-Boot] [PATCH] nand: Fix some more NULL name tests Tony Lindgren
[U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program Leif Lindholm
[U-Boot] [PATCH] armv7:ls1021a: Enable workaround for DDR erratum A-009942 Shengzhou Liu
[U-Boot] [PATCH 0/2] Add TOPIC Miami boards Mike Looijmans
[U-Boot] [PATCH 1/2] Add topic-miami board support Mike Looijmans
[U-Boot] [PATCH 2/2] Add topic_miamiplus board Mike Looijmans
[U-Boot] [PATCH 0/2] Add TOPIC Miami boards Mike Looijmans
[U-Boot] [PATCH 0/2] Add TOPIC Miami boards Mike Looijmans
[U-Boot] [PATCH 0/2] Add TOPIC Miami boards Mike Looijmans
[U-Boot] [PATCH] tools: mkimage: Add support for initialization table for Zynq and ZynqMP Mike Looijmans
[U-Boot] [PATCH] mach-zynq/Kconfig: Make SYS_VENDOR configurable Mike Looijmans
[U-Boot] [PATCH v2] tools: mkimage: Add support for initialization table for Zynq and ZynqMP Mike Looijmans
[U-Boot] [PATCH] mach-zynq/Kconfig: Make SYS_VENDOR configurable Mike Looijmans
[U-Boot] [PATCH] Add support for the topic-miami system-on-modules and carrier boards Mike Looijmans
[U-Boot] [v2, 1/5] mmc: fsl_esdhc: don't set XFERTYP_RSPTYP_48_BUSY for CMD with busy response Y.B. Lu
[U-Boot] [v2, 1/5] mmc: fsl_esdhc: don't set XFERTYP_RSPTYP_48_BUSY for CMD with busy response Y.B. Lu
[U-Boot] [v2, 2/5] mmc: send STOP command when the READ/WRITE commands fail Y.B. Lu
[U-Boot] [v2, 4/5] mmc: add workaround for eSDHC erratum A009620 Y.B. Lu
[U-Boot] [v2, 1/5] mmc: fsl_esdhc: don't set XFERTYP_RSPTYP_48_BUSY for CMD with busy response Y.B. Lu
[U-Boot] [PATCH 1/4] fs/fat: Remove two statements without effect Lukasz Majewski
[U-Boot] [PATCH 2/4] fs/fat: Do not write unmodified fat entries to disk Lukasz Majewski
[U-Boot] [PATCH 3/4] fs/fat: Correct description of determine_fatent function Lukasz Majewski
[U-Boot] [ANN] U-Boot v2016.09 is released Lukasz Majewski
[U-Boot] [PATCH] ML: SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR Lukasz Majewski
[U-Boot] [PATCH] scripts: Add script to extract default environment Lukasz Majewski
[U-Boot] [PATCHv2] scripts: Add script to extract default environment Lukasz Majewski
[U-Boot] [PATCH] ML: SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR Lukasz Majewski
[U-Boot] [PATCH] ML: SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR Lukasz Majewski
[U-Boot] [PATCH] dfu: Migrate to Kconfig Lukasz Majewski
[U-Boot] [PATCH] dfu: Migrate to Kconfig Lukasz Majewski
[U-Boot] [PATCHv2] scripts: Add script to extract default environment Lukasz Majewski
[U-Boot] [PATCH] usb:gadget: Disallow DFU in SPL for now Lukasz Majewski
[U-Boot] U-Boot DFU test and Ctrl+C Lukasz Majewski
[U-Boot] [PATCHv2] scripts: Add script to extract default environment Lukasz Majewski
[U-Boot] [bug report] sunxi: booting from eMMC Ciprian Manea
[U-Boot] [PATCH] getting ubifs to run Hoefle Marco
[U-Boot] [PATCH] getting ubifs to run Hoefle Marco
[U-Boot] [PATCH 1/5] power: regulator: Add ctrl_reg and volt_reg fields for pmic Przemyslaw Marczak
[U-Boot] [PATCH 1/5] power: regulator: Add ctrl_reg and volt_reg fields for pmic Przemyslaw Marczak
[U-Boot] [PATCH v3 3/5] regulator: fixed: honour optionality of enable gpio Przemyslaw Marczak
[U-Boot] [PATCH] power: regulator: Add support for gpio regulators Przemyslaw Marczak
[U-Boot] [PATCH] power: regulator: Add limits checking while setting voltage and current Przemyslaw Marczak
[U-Boot] [PATCH] power: regulator: Add support for gpio regulators Przemyslaw Marczak
[U-Boot] imx7 u-boot nand update from u-boot Belisko Marek
[U-Boot] Patch for OLinuXino Lime boards: default DRAM settings Josh Marshall
[U-Boot] [PATCH v2 2/4] ARM: armv7: guard memory reserve for PSCI with #ifdef CONFIG_ARMV7_PSCI Jon Masters
[U-Boot] [PATCH v2 2/4] ARM: armv7: guard memory reserve for PSCI with #ifdef CONFIG_ARMV7_PSCI Jon Masters
[U-Boot] [PATCH v2] sunxi: Add support for A33-OLinuXino board Stefan Mavrodiev
[U-Boot] [PATCH] image-fit: Fix fit_get_node_from_config semantics George McCollister
[U-Boot] Persisting data across a reset Lorna McNeill
[U-Boot] [PATCH v2 4/7] x86: squash lines for immediate return Bin Meng
[U-Boot] [PATCH] net: write enetaddr down to hardware on env_callback Bin Meng
[U-Boot] [PATCH] x86: conga-qeval20-qa3: Add README to explain the console UART options Bin Meng
[U-Boot] [PATCH] net: write enetaddr down to hardware on env_callback Bin Meng
[U-Boot] [PATCH] net: write enetaddr down to hardware on env_callback Bin Meng
[U-Boot] [PATCH v6 01/10] x86: Move table csum into separate file Bin Meng
[U-Boot] [PATCH v6 05/10] cpu: Add DMTF id and family fields Bin Meng
[U-Boot] [PATCH v6 06/10] cpu: Add get_vendor callback Bin Meng
[U-Boot] [PATCH v6 07/10] smbios: Generate type 4 on non-x86 systems Bin Meng
[U-Boot] [PATCH] x86: baytrail: Add 2nd eMMC controller to the PCI probe list Bin Meng
[U-Boot] [PATCH v2] x86: conga-qeval20-qa3: Add README to explain the console UART options Bin Meng
[U-Boot] [PATCH] x86: baytrail: Add 2nd eMMC controller to the PCI probe list Bin Meng
[U-Boot] [PATCH v2 1/8] x86: Add implementations of setjmp() and longjmp() Bin Meng
[U-Boot] [PATCH v2 1/8] x86: Add implementations of setjmp() and longjmp() Bin Meng
[U-Boot] [PATCH v2 2/8] efi: Use asmlinkage for EFIAPI Bin Meng
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Bin Meng
[U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program Bin Meng
[U-Boot] [PATCH v2] x86: baytrail: Add 2nd eMMC controller to the PCI probe list Bin Meng
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Bin Meng
[U-Boot] [PATCH v2 1/8] x86: Add implementations of setjmp() and longjmp() Bin Meng
[U-Boot] [PATCH 15/23] gpio: eg20t: Add driver for Intel EG20T GPIO controllers Bin Meng
[U-Boot] [PATCH 10/23] net: pch_gbe: Reset during probe Bin Meng
[U-Boot] [PATCH 11/23] net: pch_gbe: Fix rx descriptor buffer addresses Bin Meng
[U-Boot] [PATCH 12/23] net: pch_gbe: CPU accessible addresses are virtual Bin Meng
[U-Boot] [PATCH 13/23] net: pch_gbe: Add cache maintenance Bin Meng
[U-Boot] [PATCH v4 00/17] sf:Updates on flash detection Bin Meng
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Bin Meng
[U-Boot] [PATCH 09/23] boston: Disable PCI bridge memory space alignment Bin Meng
[U-Boot] [PATCH 16/23] net: pch_gbe: Support PHY reset GPIOs Bin Meng
[U-Boot] [PATCH 15/23] gpio: eg20t: Add driver for Intel EG20T GPIO controllers Bin Meng
[U-Boot] [PATCH v2] x86: baytrail: Add 2nd eMMC controller to the PCI probe list Bin Meng
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Bin Meng
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Bin Meng
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Bin Meng
[U-Boot] [PATCH v2 4/8] x86: Tidy up selection of building the EFI stub Bin Meng
[U-Boot] [PATCH] x86: Fix Linux v4.7+ zimage booting (update bootparam.h) Bin Meng
[U-Boot] [PATCH] board: am57xx: MAINTAINERS: Update for current maintainer Nishanth Menon
[U-Boot] [PATCH] board: am57xx: Fix missing check for beagle_x15 Nishanth Menon
[U-Boot] [PATCH] board: am57xx: Fix missing check for beagle_x15 Nishanth Menon
[U-Boot] [PATCH V2] board: am57xx: Fix missing check for beagle_x15 Nishanth Menon
[U-Boot] [PATCH v2 0/7] Adds support for secure boot on Keystone SoCs (K2E) Nishanth Menon
[U-Boot] [PATCH] TI: Rework SRAM definitions and maximums Ladislav Michl
[U-Boot] [PATCH] cmd: ubi: add option to specify volume id Ladislav Michl
[U-Boot] [PATCH] cmd/onenand.c: block align warning Ladislav Michl
[U-Boot] [PATCH 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO Ladislav Michl
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Ladislav Michl
[U-Boot] [PATCH 3/3] igep00x0: add Hynix timings Ladislav Michl
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Ladislav Michl
[U-Boot] [PATCH 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO Ladislav Michl
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Ladislav Michl
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Ladislav Michl
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Ladislav Michl
[U-Boot] [PATCH] board: tbs2910: Fix BOOTMAPSZ Soeren Moch
[U-Boot] [PATCH] board: tbs2910: Add CMD_PART Soeren Moch
[U-Boot] [PATCH 0/2] Add DRA72 Rev C support Mugunthan V N
[U-Boot] [PATCH 1/2] ARM: dts: dra72: add rev C evm support Mugunthan V N
[U-Boot] [PATCH 2/2] board: ti: dra7xx: complex definitions should be protected with parentheses Mugunthan V N
[U-Boot] Building u-boot.imx and SPL simultaneously Eric Nelson
[U-Boot] Building u-boot.imx and SPL simultaneously Eric Nelson
[U-Boot] EHCI timed out on TD - token=0x80008d80 Andreas Neubacher
[U-Boot] [PATCH v2 10/11] arm: dts: socfpga: Add dts for Stratix 10 socdk Dinh Nguyen
[U-Boot] [PATCH v2 01/11] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Dinh Nguyen
[U-Boot] [PATCH v2 09/11] arm: socfpga: stratix10: Add board directory for Stratix 10 socdk Dinh Nguyen
[U-Boot] [PATCH v2 11/11] arm: socfpga: Add support for Stratix 10 SoC dev kit Dinh Nguyen
[U-Boot] [PATCH v3 9/9] arm: socfpga: sockit: Adding handoff for SDRAM ctrlcfg.extratime1 Dinh Nguyen
[U-Boot] [PATCH] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc Dinh Nguyen
[U-Boot] [RFC] board/liteboard: Add support for liteSOM and liteBoard Marcin Niestroj
[U-Boot] [PATCH 0/2] ARM: imx6ul: Support liteSOM and liteBoard Marcin Niestroj
[U-Boot] [PATCH 1/2] ARM: imx6ul: Add support for liteSOM Marcin Niestroj
[U-Boot] [PATCH 2/2] board/liteboard: Add support for liteBoard Marcin Niestroj
[U-Boot] UBI and UBIFS on ARM64 Adam Oleksy
[U-Boot] UBI and UBIFS on ARM64 Adam Oleksy
[U-Boot] [PATCH] ARM64: Add support for some of atomic64 operations Adam Oleksy
[U-Boot] UBI and UBIFS on ARM64 Adam Oleksy
[U-Boot] [PATCH v2] ARM64: Add support for some of atomic64 operations Adam Oleksy
[U-Boot] UBI and UBIFS on ARM64 Oleksy, Adam (Nokia - PL/Wroclaw)
[U-Boot] Q on expected u-boot behavior on ping response Chris Packham
[U-Boot] is there really a "CONFIG_RAMBOOT" config option? Chris Packham
[U-Boot] [PATCH v1] mtd: nand: pxa3xx: use nand_set_controller_data Chris Packham
[U-Boot] [PATCH v1 1/3] arm: mvebu: create generic 88F6820 config option Chris Packham
[U-Boot] [PATCH v1 2/3] arm: mvebu: add DB-88F6820-AMC board Chris Packham
[U-Boot] [PATCH v1 3/3] arm: mvebu: NAND support for DB-88F6820-AMC Chris Packham
[U-Boot] [PATCH v1 2/3] arm: mvebu: add DB-88F6820-AMC board Chris Packham
[U-Boot] [PATCH v2 1/3] arm: mvebu: create generic 88F6820 config option Chris Packham
[U-Boot] [PATCH v2 2/3] arm: mvebu: add DB-88F6820-AMC board Chris Packham
[U-Boot] [PATCH v2 3/3] arm: mvebu: NAND support for DB-88F6820-AMC Chris Packham
[U-Boot] [RFC PATCH v1] common/console.c: ensure GD_FLG_SILENT is set or cleared Chris Packham
[U-Boot] [PATCH v2 1/3] arm: mvebu: create generic 88F6820 config option Chris Packham
[U-Boot] [PATCH 2/2] zynq: nand: Enable Nand flash controller driver a zynq board Siva Durga Prasad Paladugu
[U-Boot] [PATCH v2 1/2] mtd: nand : zynq_nand: Add nand driver support for zynq Siva Durga Prasad Paladugu
[U-Boot] [PATCH v2 2/2] zynq: nand: Enable Nand flash controller driver a zynq board Siva Durga Prasad Paladugu
[U-Boot] [PATCH v2 1/2] mtd: nand : zynq_nand: Add nand driver support for zynq Siva Durga Prasad Paladugu
[U-Boot] [PATCH v3 1/2] mtd: nand : zynq_nand: Add nand driver support for zynq Siva Durga Prasad Paladugu
[U-Boot] [PATCH v3 2/2] zynq: nand: Enable Nand flash controller driver a zynq board Siva Durga Prasad Paladugu
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Sandy Patterson
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Sandy Patterson
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Sandy Patterson
[U-Boot] [PATCH v2 1/3] rk3288: config change for enable dram capacity auto-detect. Sandy Patterson
[U-Boot] [PATCH v2 0/3] Add sdram capacity auto detect for rk3288 Sandy Patterson
[U-Boot] [PATCH v2 1/3] rk3288: config change for enable dram capacity auto-detect. Sandy Patterson
[U-Boot] [PATCH v2 0/3] Add sdram capacity auto detect for rk3288 Sandy Patterson
[U-Boot] disabling mmc in spl when booting using bootrom Sandy Patterson
[U-Boot] Rockchip patches for testing Sandy Patterson
[U-Boot] [PATCH] arm: dra7xx: Move fastboot options to defconfig Sam Protsenko
[U-Boot] [PATCH] arm: dra7xx: Move fastboot options to defconfig Sam Protsenko
[U-Boot] [PATCH 0/4] sunxi: Pine64 fixes Andre Przywara
[U-Boot] [PATCH 1/4] Revert "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Andre Przywara
[U-Boot] [PATCH 2/4] Revert "sunxi: Downclock AHB1 to 100MHz on Allwinner A64" Andre Przywara
[U-Boot] [PATCH 3/4] sunxi: Kconfig: rename non-existent SUN50I_A64 config symbol Andre Przywara
[U-Boot] [PATCH 4/4] sunxi: fix 64-bit compiler warning for SPL header parsing Andre Przywara
[U-Boot] [PATCH 1/4] Revert "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Andre Przywara
[U-Boot] [PATCH 2/4] Revert "sunxi: Downclock AHB1 to 100MHz on Allwinner A64" Andre Przywara
[U-Boot] [PATCH 0/4] sunxi: Pine64 fixes Andre Przywara
[U-Boot] [PATCH 0/4] sunxi: Pine64 fixes Andre Przywara
[U-Boot] [PATCH 0/4] sunxi: Pine64 fixes Andre Przywara
[U-Boot] [PATCH 1/4] Revert "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Andre Przywara
[U-Boot] [PATCH 1/2] Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand. Zhao Qiang
[U-Boot] [PATCH 2/2] pbl: use "wait" command instead of "flush" command Zhao Qiang
[U-Boot] [PATCH v3 1/2] Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand. Zhao Qiang
[U-Boot] [PATCH v3 2/2] pbl: use "wait" command instead of "flush" command Zhao Qiang
[U-Boot] [PATCH v4 1/2] Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand. Zhao Qiang
[U-Boot] [PATCH v4 2/2] pbl: use "wait" command instead of "flush" command Zhao Qiang
[U-Boot] [PATCH v5 1/2] Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand. Zhao Qiang
[U-Boot] [PATCH v5 2/2] pbl: use "wait" command instead of "flush" command Zhao Qiang
[U-Boot] [Patch v3 0/7] Add LS1046ARDB board support Gong Qianyu
[U-Boot] [Patch v3 1/7] ddr: fsl: fix a compile issue Gong Qianyu
[U-Boot] [Patch v3 2/7] armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latency Gong Qianyu
[U-Boot] [Patch v3 3/7] Export memset for standalone AQ FW load apps Gong Qianyu
[U-Boot] [Patch v3 4/7] armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for standalone app Gong Qianyu
[U-Boot] [Patch v3 5/7] armv8: ls1046a: Enable DDR erratum for ls1046a Gong Qianyu
[U-Boot] [Patch v3 6/7] armv8: ls1046a: disable SATA ECC in DCSR Gong Qianyu
[U-Boot] [Patch v3 7/7] armv8: ls1046ardb: Add LS1046ARDB board support Gong Qianyu
[U-Boot] [RESEND Patch v2] net: fm: fix spi flash probe for using driver model Gong Qianyu
[U-Boot] [Patch v4 0/8] Add LS1046ARDB&QDS board support Gong Qianyu
[U-Boot] [Patch v4 1/8] ddr: fsl: fix a compile issue Gong Qianyu
[U-Boot] [Patch v4 2/8] armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latency Gong Qianyu
[U-Boot] [Patch v4 3/8] Export memset for standalone AQ FW load apps Gong Qianyu
[U-Boot] [Patch v4 4/8] armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for standalone app Gong Qianyu
[U-Boot] [Patch v4 5/8] armv8: ls1046a: Enable DDR erratum for ls1046a Gong Qianyu
[U-Boot] [Patch v4 6/8] armv8: ls1046a: disable SATA ECC in DCSR Gong Qianyu
[U-Boot] [Patch v4 7/8] armv8: ls1046ardb: Add LS1046ARDB board support Gong Qianyu
[U-Boot] [Patch v4 8/8] armv8: ls1046aqds: Add LS1046AQDS board support Gong Qianyu
[U-Boot] [Patch v5 0/9] Add LS1046ARDB&QDS board support Gong Qianyu
[U-Boot] [Patch v5 1/9] ddr: fsl: fix a compile issue Gong Qianyu
[U-Boot] [Patch v5 2/9] Export memset for standalone AQ FW load apps Gong Qianyu
[U-Boot] [Patch v5 3/9] armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latency Gong Qianyu
[U-Boot] [Patch v5 4/9] armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for standalone app Gong Qianyu
[U-Boot] [Patch v5 5/9] armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r Gong Qianyu
[U-Boot] [Patch v5 6/9] armv8: ls1046a: Enable DDR erratum for ls1046a Gong Qianyu
[U-Boot] [Patch v5 7/9] armv8: ls1046a: disable SATA ECC in DCSR Gong Qianyu
[U-Boot] [Patch v5 8/9] armv8: ls1046ardb: Add LS1046ARDB board support Gong Qianyu
[U-Boot] [Patch v5 9/9] armv8: ls1046aqds: Add LS1046AQDS board support Gong Qianyu
[U-Boot] [Patch v6 0/9] Add LS1046ARDB&QDS board support Gong Qianyu
[U-Boot] [Patch v6 1/9] ddr: fsl: fix a compile issue Gong Qianyu
[U-Boot] [Patch v6 2/9] Export memset for standalone AQ FW load apps Gong Qianyu
[U-Boot] [Patch v6 3/9] armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latency Gong Qianyu
[U-Boot] [Patch v6 4/9] armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for standalone app Gong Qianyu
[U-Boot] [Patch v6 5/9] armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r Gong Qianyu
[U-Boot] [Patch v6 6/9] armv8: ls1046a: Enable DDR erratum for ls1046a Gong Qianyu
[U-Boot] [Patch v6 7/9] armv8: ls1046a: disable SATA ECC in DCSR Gong Qianyu
[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support Gong Qianyu
[U-Boot] [Patch v6 9/9] armv8: ls1046aqds: Add LS1046AQDS board support Gong Qianyu
[U-Boot] [PATCH] armv8: ls1043a: Extend the size for SPL Gong Qianyu
[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support Gong Qianyu
[U-Boot] [PATCH 0/2] spi: ti_qspi: Increase write speed Vignesh R
[U-Boot] [PATCH 1/2] spi: ti_qspi: use 128 bit transfer mode when writing to flash Vignesh R
[U-Boot] [PATCH 2/2] spi: ti_qspi: Remove unnecessary udelay for AM437x Vignesh R
[U-Boot] [PATCH 1/2] spi: ti_qspi: use 128 bit transfer mode when writing to flash Vignesh R
[U-Boot] [PATCH v2 0/2] spi: ti_qspi: Increase write speed Vignesh R
[U-Boot] [PATCH v2 1/2] spi: ti_qspi: use 128 bit transfer mode when writing to flash Vignesh R
[U-Boot] [PATCH v2 2/2] spi: ti_qspi: Remove unnecessary udelay for AM437x Vignesh R
[U-Boot] [PATCH v2 1/4] disk: part: implement generic function part_get_info_by_name() Steve Rae
[U-Boot] [PATCH v2 2/4] fastboot: add support for writing MBR Steve Rae
[U-Boot] [PATCH v2 3/4] disk: part: refactor generic name creation for DOS and ISO Steve Rae
[U-Boot] [PATCH v2 4/4] fastboot: move FASTBOOT_FLASH options into Kconfig Steve Rae
[U-Boot] [PATCH v2 0/4] Fastboot MBR and generic partition support Steve Rae
[U-Boot] [PATCH] Kconfig: update FASTBOOT_FLASH_MMC_DEV Steve Rae
[U-Boot] [PATCH 1/2] fastboot: more support for reboot-bootloader command Steve Rae
[U-Boot] [PATCH 2/2] bcm: fastboot: implement 'reboot-bootloader' Steve Rae
[U-Boot] Q on expected u-boot behavior on ping response John Rama
[U-Boot] [PATCH] efi_loader: Fix crash on 32-bit systems Robin Randhawa
[U-Boot] [PATCH] efi_loader: Fix crash on 32-bit systems Robin Randhawa
[U-Boot] [PATCH] serial: ns16550: Fix serial output on Tegra186 Thierry Reding
[U-Boot] [PATCH] serial: ns16550: Fix serial output on Tegra186 Thierry Reding
[U-Boot] [PATCH v2] watchdog: Fix Watchdog Reset while in U-Boot Prompt Andreas Reichel
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions Tom Rini
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Tom Rini
[U-Boot] Pull request, u-boot-tegra/master Tom Rini
[U-Boot] [PATCH] ext4: fix possible crash on directory traversal, ignore deleted entries Tom Rini
[U-Boot] [PATCH v2 1/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection Tom Rini
[U-Boot] [PATCH v2 2/3] board: am335x-icev2: add ethernet phy mode detection logic Tom Rini
[U-Boot] [PATCH v2 3/3] board: am335x: Always set eth/eth1addr environment variable Tom Rini
[U-Boot] [PATCH v4 01/10] Kconfig: Separate AM33XX SOC config from target board config Tom Rini
[U-Boot] [PATCH v4 02/10] am33xx: config.mk: Add support for additional secure boot image types Tom Rini
[U-Boot] [PATCH v4 03/10] doc: Update info on using AM33xx secure devices from TI Tom Rini
[U-Boot] [PATCH v4 04/10] am33xx: config.mk: Fix option used to enable SPI SPL image type Tom Rini
[U-Boot] [PATCH v4 05/10] board: am33xx-hs: Allow post-processing of FIT image on AM33xx Tom Rini
[U-Boot] [PATCH v4 06/10] ti: omap-common: Allow AM33xx devices to be built securely Tom Rini
[U-Boot] [PATCH v4 07/10] am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE Tom Rini
[U-Boot] [PATCH v4 08/10] config: Remove usage of CONFIG_STORAGE_EMMC Tom Rini
[U-Boot] [PATCH v4 09/10] ti_armv7_common: Disable Falcon Mode on HS devices Tom Rini
[U-Boot] [PATCH v4 10/10] defconfig: Add a config for AM335x High Security EVM with SD Boot support Tom Rini
[U-Boot] [PATCH 1/2] spi: ti_qspi: use 128 bit transfer mode when writing to flash Tom Rini
[U-Boot] [PATCH 2/2] spi: ti_qspi: Remove unnecessary udelay for AM437x Tom Rini
[U-Boot] [PATCH 1/5] ti: omap5: Add Kconfig options for secure EMIF reservations Tom Rini
[U-Boot] [PATCH 2/5] arm: omap5: secure API for EMIF memory reservations Tom Rini
[U-Boot] [PATCH 3/5] ARM: DRA7: Add secure emif setup calls Tom Rini
[U-Boot] [PATCH 4/5] ti_omap5_common: mark region of DRAM protected on HS parts Tom Rini
[U-Boot] [PATCH 5/5] ARM: omap5: add fdt secure dram reservation fixup Tom Rini
[U-Boot] [PATCH] board: am57xx: MAINTAINERS: Update for current maintainer Tom Rini
[U-Boot] [PATCH v4 10/10] defconfig: Add a config for AM335x High Security EVM with SD Boot support Tom Rini
[U-Boot] [PATCH V2] board: am57xx: Fix missing check for beagle_x15 Tom Rini
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Tom Rini
[U-Boot] [PATCH v2 1/7] include: image.h: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS Tom Rini
[U-Boot] [PATCH v2 1/7] include: image.h: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS Tom Rini
[U-Boot] [PATCH v2 3/7] arm: omap-common: adds secure image name common to OMAP and keystone Tom Rini
[U-Boot] [PATCH v2 4/7] arm: omap-common: Enable support for K2 HS devices in u-boot Tom Rini
[U-Boot] [PATCH v2 2/7] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs Tom Rini
[U-Boot] [PATCH v2 6/7] doc: Updates info on using keystone secure devices from TI Tom Rini
[U-Boot] Building u-boot.imx and SPL simultaneously Tom Rini
[U-Boot] Building u-boot.imx and SPL simultaneously Tom Rini
[U-Boot] Building u-boot.imx and SPL simultaneously Tom Rini
[U-Boot] Building u-boot.imx and SPL simultaneously Tom Rini
[U-Boot] [PULL] Please pull u-boot-imx Tom Rini
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Tom Rini
[U-Boot] Pull request: nand flash Tom Rini
[U-Boot] ARM: dts: dra72-evm: fix broken ethernet Tom Rini
[U-Boot] Please pull u-boot-sunxi master (v2016.09 fixes) Tom Rini
[U-Boot] [PATCH v2 01/44] Correct defconfigs using savedefconfig Tom Rini
[U-Boot] [PATCH v2 07/44] Use separate options for TPL support Tom Rini
[U-Boot] [PATCH 4/5] ti_omap5_common: mark region of DRAM protected on HS parts Tom Rini
[U-Boot] [PATCH v2 3/4] ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig Tom Rini
[U-Boot] [PATCH] board: ks2: README: Update to add K2G support Tom Rini
[U-Boot] [PATCH v2 01/44] Correct defconfigs using savedefconfig Tom Rini
[U-Boot] [PATCH 0/4] sunxi: Pine64 fixes Tom Rini
[U-Boot] [PULL] Resend: Please pull u-boot-imx Tom Rini
[U-Boot] [U-Boot,1/2] bcm2835_gpio: Implement GPIOF_FUNC Tom Rini
[U-Boot] image-fit: fix fit_image_load() OS check Tom Rini
[U-Boot] [U-Boot, v4, 2/2] serial: bcm283x_mu: Detect disabled serial device Tom Rini
[U-Boot] [U-Boot, 1/4] pinctrl: generic: scan for "pins" and "groups" properties in sub-nodes Tom Rini
[U-Boot] [U-Boot, 2/4] arm: dts: update DTS files for meson-gxbb and odroid-c2 Tom Rini
[U-Boot] [U-Boot, 3/4] pinctrl: add driver for meson-gxbb pin controller Tom Rini
[U-Boot] [U-Boot, 3/4] pinctrl: add driver for meson-gxbb pin controller Tom Rini
[U-Boot] [U-Boot, 4/4] meson: odroid-c2: enable Ethernet support through the device tree Tom Rini
[U-Boot] [U-Boot, 1/4] tools: moveconfig: remove document about deprecated error message Tom Rini
[U-Boot] [U-Boot, 2/4] tools: moveconfig: use sets instead of lists for failed/suspicious boards Tom Rini
[U-Boot] [U-Boot, 3/4] tools: moveconfig: warn loudly if moved option has no entry in Kconfig Tom Rini
[U-Boot] [U-Boot, 4/4] tools: moveconfig: add --spl option to move options for SPL build Tom Rini
[U-Boot] regulator: fixed: obey startup delay Tom Rini
[U-Boot] [U-Boot, 1/3] ARM: AM43xx: Enable post-processing of FIT artifacts loaded by U-Boot Tom Rini
[U-Boot] [U-Boot, 2/3] ARM: DRA7xx: Enable post-processing of FIT artifacts loaded by U-Boot Tom Rini
[U-Boot] [U-Boot, 3/3] ARM: AM57xx: Enable post-processing of FIT artifacts loaded by U-Boot Tom Rini
[U-Boot] configs: am4xhs: Modify SPL load address to fix UART boot issue Tom Rini
[U-Boot] board/BuR/common: increase NET_RETRY_COUNT to 10 Tom Rini
[U-Boot] README: add cmd directory description Tom Rini
[U-Boot] omap3logic: Fix PBIAS Bug Tom Rini
[U-Boot] TI: Rework SRAM definitions and maximums Tom Rini
[U-Boot] [U-Boot, 1/2] omap3_pandora: Fix mmc loading of autoboot script to use correct syntax. Tom Rini
[U-Boot] [U-Boot, 2/2] omap3_pandora: Switch to using "load" command to load the autoboot script. Tom Rini
[U-Boot] [U-Boot, v2, 1/4] ARM: tegra: remove wrong dependency on SPL_BUILD Tom Rini
[U-Boot] [U-Boot, v2, 2/4] ARM: armv7: guard memory reserve for PSCI with #ifdef CONFIG_ARMV7_PSCI Tom Rini
[U-Boot] [U-Boot, v2, 3/4] ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig Tom Rini
[U-Boot] [U-Boot, v2, 3/4] ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig Tom Rini
[U-Boot] [U-Boot, v2, 4/4] ARM: armv7: move ARMV7_PSCI_NR_CPUS to Kconfig Tom Rini
[U-Boot] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Tom Rini
[U-Boot] ARM: am335x: select DM_GPIO Tom Rini
[U-Boot] [U-Boot, 1/2] omap3_pandora: Switch to use config_distro_bootcmd. Tom Rini
[U-Boot] [U-Boot, 2/2] omap3_pandora: Only set bootargs if distro_bootcmd failed to load. Tom Rini
[U-Boot] common/Kconfig: Fix various innocuous typos. Tom Rini
[U-Boot] [U-Boot,v3,1/2] pxe: Fix pxe boot with FIT image Tom Rini
[U-Boot] [U-Boot, v3, 2/2] pxe: Modify README to add the description about FIT image Tom Rini
[U-Boot] [U-Boot, v2] global_data.h: Standardize tabs and alignment for comments Tom Rini
[U-Boot] board: am57xx: MAINTAINERS: Update for current maintainer Tom Rini
[U-Boot] [U-Boot, V2] board: am57xx: Fix missing check for beagle_x15 Tom Rini
[U-Boot] compiler.h: use system endian macros on OpenBSD Tom Rini
[U-Boot] image-fit: switch ENOLINK to ENOENT Tom Rini
[U-Boot] efi_loader: provide efi_mem_desc version Tom Rini
[U-Boot] board: ks2: README: Update to add K2G support Tom Rini
[U-Boot] image-fit: switch ENOLINK to ENOENT Tom Rini
[U-Boot] image-fit: switch ENOLINK to ENOENT Tom Rini
[U-Boot] image-fit: switch ENOLINK to ENOENT Tom Rini
[U-Boot] config USB_STORAGE: defconfig vs include header Tom Rini
[U-Boot] [PATCH] ARM: Respect CONFIG_SPL_STACK define in lowlevel_init.S Tom Rini
[U-Boot] RFC: 'fastboot boot' uses wrong address when calling bootm Tom Rini
[U-Boot] [PATCH 1/3] disk: part: implement generic function part_get_info_by_name() Tom Rini
[U-Boot] [PATCH 2/3] fastboot: add support for writing MBR Tom Rini
[U-Boot] [PATCH 3/3] disk: part: refactor generic name creation for DOS and ISO Tom Rini
[U-Boot] [PATCH 0/3] Fastboot MBR and generic partition support Tom Rini
[U-Boot] [RFC] bootm: fix passing argc to standalone apps Tom Rini
[U-Boot] config USB_STORAGE: defconfig vs include header Tom Rini
[U-Boot] [PATCH 3/3 v2] test/fs: strip carriage-return from sandbox output Tom Rini
[U-Boot] [PATCH] Fix fastboot boot address Tom Rini
[U-Boot] config USB_STORAGE: defconfig vs include header Tom Rini
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Tom Rini
[U-Boot] [PATCH 2/2] configs: Migrate CONFIG_USB_STORAGE Tom Rini
[U-Boot] [PATCH 1/1] cmd: Rework disk.c usage Tom Rini
[U-Boot] [PULL] Resend: Please pull u-boot-imx Tom Rini
[U-Boot] [PATCH 2/2] configs: Migrate CONFIG_USB_STORAGE Tom Rini
[U-Boot] [PATCH v2 4/4] fastboot: move FASTBOOT_FLASH options into Kconfig Tom Rini
[U-Boot] [RFC PATCH] common, kconfig: move VERSION_VARIABLE to Kconfig Tom Rini
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Tom Rini
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Tom Rini
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Tom Rini
[U-Boot] [PATCH 2/2] configs: Migrate CONFIG_USB_STORAGE Tom Rini
[U-Boot] Pull request: u-boot-net.git master Tom Rini
[U-Boot] [PATCH 1/1] cmd: Rework disk.c usage Tom Rini
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Tom Rini
[U-Boot] [RFC PATCH] common, kconfig: move VERSION_VARIABLE to Kconfig Tom Rini
[U-Boot] [PATCH] cmd: booti: fix the image runtime location Tom Rini
[U-Boot] sf: fix sf probe Tom Rini
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Tom Rini
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Tom Rini
[U-Boot] [ANN] U-Boot v2016.09 is released Tom Rini
[U-Boot] [PATCH] cmd: booti: fix the image runtime location Tom Rini
[U-Boot] [PATCH v2 0/2] Detect and reject new ad-hoc CONFIG options Tom Rini
[U-Boot] [PATCH v2 0/2] Detect and reject new ad-hoc CONFIG options Tom Rini
[U-Boot] [PATCH v2 0/5] Enhance fs tests Tom Rini
[U-Boot] [ANN] U-Boot v2016.09 is released Tom Rini
[U-Boot] [PATCH v2 0/2] Detect and reject new ad-hoc CONFIG options Tom Rini
[U-Boot] [PATCH v3 0/2] Detect and reject new ad-hoc CONFIG options Tom Rini
[U-Boot] pull request: u-boot-uniphier/master Tom Rini
[U-Boot] [ANN] U-Boot v2016.09 is released Tom Rini
[U-Boot] [PATCH] ARM: Add register defines for am33xx ePWM registers Tom Rini
[U-Boot] [PATCH 1/6] omap: Remove hardcoding of mmu section shift to 20 Tom Rini
[U-Boot] [PATCH 2/6] omap: Set appropriate cache configuration for LPAE and non-LAPE cases Tom Rini
[U-Boot] [PATCH 3/6] configs: am57xx_evm_defconfig: Enable LPAE mode Tom Rini
[U-Boot] [PATCH 4/6] configs: dra7xx_evm_defconfig: Enable LPAE mode Tom Rini
[U-Boot] [PATCH 5/6] ARM: Introduce function to switch to hypervisor mode Tom Rini
[U-Boot] [PATCH 6/6] ARM: OMAP5+: Override switch_to_hypervisor function Tom Rini
[U-Boot] [PATCH] keystone2: k2g: add env script to load firmware initramfs as part of boot flow Tom Rini
[U-Boot] [PATCH 1/2] ARM: keystone2: Add support for parsing monitor header Tom Rini
[U-Boot] [PATCH 2/2] ti_armv7_keystone2: Update addr_mon variable Tom Rini
[U-Boot] [PATCH v3 12/45] spear: Use upper case for CONFIG options Tom Rini
[U-Boot] [PATCH] test/py/tests/test_vboot.py: Add check that we boot the image Tom Rini
[U-Boot] Please pull from u-boot-i2c Tom Rini
[U-Boot] [PATCH v3 00/45] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 01/45] Correct defconfigs using savedefconfig Tom Rini
[U-Boot] [U-Boot, v3, 02/45] moveconfig: Add an option to skip prompts Tom Rini
[U-Boot] [U-Boot, v3, 03/45] moveconfig: Add an option to commit changes Tom Rini
[U-Boot] [U-Boot, v3, 04/45] Kconfig: Move SPL settings into their own file Tom Rini
[U-Boot] [U-Boot, v3, 05/45] arm: fsl: Adjust ordering of #ifndef CONFIG_SPL_BUILD Tom Rini
[U-Boot] [U-Boot,v3,06/45] Drop CONFIG_SPL_RAM_SUPPORT Tom Rini
[U-Boot] [U-Boot, v3, 07/45] Use separate options for TPL support Tom Rini
[U-Boot] [U-Boot, v4, 08/45] Kconfig: spl: Add SPL support options to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 09/45] Kconfig: tpl: Add some TPL support options to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 10/45] Move existing use of CONFIG_SPL_DM to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 11/45] Move existing use of CONFIG_SPL_RSA to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 12/45] spear: Use upper case for CONFIG options Tom Rini
[U-Boot] [U-Boot, v3, 13/45] Convert CONFIG_SPL_CRYPTO_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 14/45] Convert CONFIG_SPL_HASH_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 15/45] Convert CONFIG_SPL_DMA_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 16/45] Convert CONFIG_SPL_DRIVERS_MISC_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 17/45] Convert CONFIG_SPL_ENV_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 18/45] Convert CONFIG_SPL_ETH_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 19/45] Convert CONFIG_SPL_EXT_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 20/45] Convert CONFIG_SPL_FAT_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 21/45] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 22/45] Convert CONFIG_SPL_I2C_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 23/45] Convert CONFIG_SPL_LIBCOMMON_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 24/45] Convert CONFIG_SPL_LIBDISK_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 25/45] Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 26/45] Convert CONFIG_SPL_MMC_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 27/45] Convert CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 28/45] Convert CONFIG_SPL_MTD_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 29/45] Convert CONFIG_SPL_MUSB_NEW_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 30/45] Convert CONFIG_SPL_NAND_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 31/45] Convert CONFIG_SPL_NET_VCI_STRING to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 32/45] Convert CONFIG_SPL_NET_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 33/45] Convert CONFIG_SPL_NOR_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 34/45] Convert CONFIG_SPL_ONENAND_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot,v4,35/45] Remove CONFIG_SPL_PINCTRL_SUPPORT Tom Rini
[U-Boot] [U-Boot, v3, 36/45] Convert CONFIG_SPL_POWER_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 37/45] Convert CONFIG_SPL_SATA_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 38/45] Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 39/45] Convert CONFIG_SPL_SPI_FLASH_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 40/45] Convert CONFIG_SPL_SPI_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 41/45] Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 42/45] Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 43/45] Convert CONFIG_SPL_USB_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 44/45] Convert CONFIG_SPL_WATCHDOG_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 45/45] Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 1/2] Kconfig: Add a whitelist of ad-hoc CONFIG options Tom Rini
[U-Boot] [U-Boot, v3, 2/2] Makefile: Give a build error if ad-hoc CONFIG options are added Tom Rini
[U-Boot] [PATCH] Repair image-fit: switch ENOLINK to ENOENT Tom Rini
[U-Boot] [PATCH] mmc: cat u8 to u64 to avoid unexpected error Tom Rini
[U-Boot] [PATCH] ML: SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR Tom Rini
[U-Boot] [GIT PULL] Xilinx changes Tom Rini
[U-Boot] [PATCH v2 04/17] Kconfig: Add DEFAULT_FDT_FILE entry Tom Rini
[U-Boot] [PATCH] ML: SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR Tom Rini
[U-Boot] [PATCH 00/27] spl: Use linker list and parameters for SPL image loading Tom Rini
[U-Boot] [PATCH 01/27] spl: Move spl_board_load_image() into a generic header Tom Rini
[U-Boot] [PATCH 02/27] spl: Add a parameter to spl_set_header_raw_uboot() Tom Rini
[U-Boot] [PATCH 03/27] spl: Add a parameter to spl_parse_image_header() Tom Rini
[U-Boot] [PATCH 04/27] spl: Add a parameter to jump_to_image_linux() Tom Rini
[U-Boot] [PATCH 05/27] spl: Add function comments to spl_start_uboot() Tom Rini
[U-Boot] [PATCH 06/27] spl: Kconfig: Move SPL_DISPLAY_PRINT to Kconfig Tom Rini
[U-Boot] [PATCH 08/27] spl: Add a way to declare an SPL image loader Tom Rini
[U-Boot] [PATCH 07/27] spl: Convert boot_device into a struct Tom Rini
[U-Boot] [PATCH] Revert "image-fit: switch ENOLINK to ENOENT" Tom Rini
[U-Boot] [PATCH 18/27] spl: spi: Move the generic SPI loader into common/spl Tom Rini
[U-Boot] [PATCH 23/27] spl: Pass spl_image as a parameter to load_image() methods Tom Rini
[U-Boot] [PATCH 24/27] spl: Update ext functions to take an spl_image parameter Tom Rini
[U-Boot] [PATCH 25/27] spl: Update fat functions to take an spl_image parameter Tom Rini
[U-Boot] [PATCH 26/27] spl: Update spl_load_simple_fit() to take an spl_image param Tom Rini
[U-Boot] [PATCH 27/27] spl: Make spl_boot_list a local variable Tom Rini
[U-Boot] Please pull ARC changes Tom Rini
[U-Boot] Please pull u-boot-sunxi master Tom Rini
[U-Boot] pull request: u-boot-uniphier/master (2nd round) Tom Rini
[U-Boot] [GIT PULL] Xilinx changes Tom Rini
[U-Boot] [PATCH] mmc: cat u8 to u64 to avoid unexpected error Tom Rini
[U-Boot] [PATCH] A20-OLinuXino-Lime2: Enable USB gadget support Tom Rini
[U-Boot] [PATCH] A20-OLinuXino-Lime2: Enable USB gadget support Tom Rini
[U-Boot] ad-hoc CONFIG build error Tom Rini
[U-Boot] [ANN] U-Boot v2016.09.01 is released Tom Rini
[U-Boot] [PATCH] A20-OLinuXino-Lime2: Enable USB gadget support Tom Rini
[U-Boot] [PATCH] cmd: Make CMD_USB_MASS_STORAGE visible only with USB_GADGET and default y Tom Rini
[U-Boot] A20-OLinuXino-Lime2: Enable USB gadget support Tom Rini
[U-Boot] [ANN] U-Boot v2016.09.01 is released Tom Rini
[U-Boot] [PATCH] ti_armv7_common.h: Adjust malloc pool size in all cases. Tom Rini
[U-Boot] [PATCH] dfu: Migrate to Kconfig Tom Rini
[U-Boot] [PATCH] dfu: Migrate to Kconfig Tom Rini
[U-Boot] [PATCH 06/13] buildman: Tidy up the 'cloning' message Tom Rini
[U-Boot] [PATCH 10/13] buildman: Allow builds to terminate cleanly Tom Rini
[U-Boot] [PATCH] ARM: uniphier: move CONFIG_SPL_* to defconfig or select Tom Rini
[U-Boot] [PATCH v2] Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL" Tom Rini
[U-Boot] [PATCH 00/27] spl: Use linker list and parameters for SPL image loading Tom Rini
[U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better Tom Rini
[U-Boot] [PATCH 2/2] PowerPC: Update last users of CONFIG_ISO_STRING to Kconfig Tom Rini
[U-Boot] [PATCH v3 1/6] dm: i2c: Add u8 read/write i2c functions Tom Rini
[U-Boot] [PATCH v3 2/6] power: regulator: Add ctrl_reg and volt_reg fields for pmic Tom Rini
[U-Boot] [PATCH v3 3/6] power: pmic: Palmas: Add the base pmic support Tom Rini
[U-Boot] [PATCH v3 4/6] power: regulator: palmas: Add regulator support Tom Rini
[U-Boot] [PATCH v3 5/6] configs: am57xx_evm_defconfig: Enable PALMAS options Tom Rini
[U-Boot] [PATCH v3 6/6] configs: dra7xx_evm_defconfig: Enable PALMAS options Tom Rini
[U-Boot] [PATCH] mmc: cat u8 to u64 to avoid unexpected error Tom Rini
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Tom Rini
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Tom Rini
[U-Boot] Please pull u-boot-rockchip Tom Rini
[U-Boot] Please pull u-boot-fsl-qoriq master Tom Rini
[U-Boot] ad-hoc config error Tom Rini
[U-Boot] ad-hoc config error Tom Rini
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Tom Rini
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Tom Rini
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Tom Rini
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Tom Rini
[U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better Tom Rini
[U-Boot] [PATCH 2/2] PowerPC: Update last users of CONFIG_ISO_STRING to Kconfig Tom Rini
[U-Boot] [U-Boot, 1/3] Kconfig: zynqmp: Move config IDENT_STRING to Kconfig Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] ad-hoc config error Tom Rini
[U-Boot] ad-hoc config error Tom Rini
[U-Boot] [PATCH] clk.h: Add <asm/errno.h> Tom Rini
[U-Boot] [PATCH] clk.h: Switch to <linux/errno.h> Tom Rini
[U-Boot] [RFC Patch 1/5] armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046A Tom Rini
[U-Boot] [RFC Patch 2/5] driver: ddr: fsl_mmdc: Pass board parameters through data structure Tom Rini
[U-Boot] [RFC Patch 3/5] armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021A Tom Rini
[U-Boot] [RFC Patch 4/5] Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig option Tom Rini
[U-Boot] [RFC Patch 5/5] armv8: ls1046ardb_emmc: Fix a typo in defconfig Tom Rini
[U-Boot] [RFC Patch 2/5] driver: ddr: fsl_mmdc: Pass board parameters through data structure Tom Rini
[U-Boot] [PATCH] omap4_panda: Disable ext2/3/4 support in SPL Tom Rini
[U-Boot] Please pull u-boot-mmc Tom Rini
[U-Boot] [GIT PULL] u-boot-mips/master Tom Rini
[U-Boot] [PATCH] clk.h: Add <asm/errno.h> Tom Rini
[U-Boot] [PATCH] omap4_panda: Disable ext2/3/4 support in SPL Tom Rini
[U-Boot] [PATCH 4/5] imx: mx6ullevk: support plugin Tom Rini
[U-Boot] [PATCH 1/5] tools: imximage: add plugin support Tom Rini
[U-Boot] [PATCH] ns16650: Make sure we have CONFIG_CLK set before using infrastructure Tom Rini
[U-Boot] [GIT PULL] Xilinx changes v2 Tom Rini
[U-Boot] Pull request: u-boot-spi/master Tom Rini
[U-Boot] pull request: u-boot-uniphier/master Tom Rini
[U-Boot] Please pull u-boot-rockchip (take 2) Tom Rini
[U-Boot] [PATCH] ns16650: Make sure we have CONFIG_CLK set before using infrastructure Tom Rini
[U-Boot] [PATCH] ns16650: Make sure we have CONFIG_CLK set before using infrastructure Tom Rini
[U-Boot] [PATCH] fs-test.sh: Update expected results Tom Rini
[U-Boot] ad-hoc config error Tom Rini
[U-Boot] test/py/tests/test_vboot.py: Add check that we boot the image Tom Rini
[U-Boot] [U-Boot, 1/2] Makefile: use if_change_dep for u-boot.cfg Tom Rini
[U-Boot] [U-Boot, 2/2] Makefile: rm u-boot.cfg dependencies are missing Tom Rini
[U-Boot] image-fit: Fix fit_get_node_from_config semantics Tom Rini
[U-Boot] [PATCH 06/13] buildman: Tidy up the 'cloning' message Tom Rini
[U-Boot] [PATCH 4/5] imx: mx6ullevk: support plugin Tom Rini
[U-Boot] [PATCH] fs-test.sh: Update expected results Tom Rini
[U-Boot] [U-Boot, v3, 1/4] ext4: change structure fields to __le/__be types Tom Rini
[U-Boot] [U-Boot,v3,2/4] ext4: use kernel names for byte swaps Tom Rini
[U-Boot] [U-Boot, v4, 3/4] ext4: fix endianess problems in ext4 write support Tom Rini
[U-Boot] [U-Boot, v3, 4/4] ext4: fix wrong usage of le32_to_cpu() Tom Rini
[U-Boot] [U-Boot, 1/4] fs/fat: Remove two statements without effect Tom Rini
[U-Boot] [U-Boot, 2/4] fs/fat: Do not write unmodified fat entries to disk Tom Rini
[U-Boot] [U-Boot, 3/4] fs/fat: Correct description of determine_fatent function Tom Rini
[U-Boot] [U-Boot, 4/4] cmd/fat: Do not crash on write when <bytes> is not specified Tom Rini
[U-Boot] [U-Boot, v2, 1/5] test/fs: Restructure file path specification to allow some flexibility Tom Rini
[U-Boot] [U-Boot, v2, 2/5] test/fs: remove use of undefined WRITE_FILE variable Tom Rini
[U-Boot] [U-Boot, v2, 3/5] test/fs: strip noise from filesystem code prior to checking results Tom Rini
[U-Boot] [U-Boot, v2, 4/5] test/fs: Check ext4 behaviour if dirent is first entry in directory block Tom Rini
[U-Boot] [U-Boot, v2, 5/5] test/fs: Check writes using "." (same dir) relative path Tom Rini
[U-Boot] [U-Boot, 1/7] ext4: Update ext2/3/4 superblock, group descriptor and inode structures Tom Rini
[U-Boot] [U-Boot, 2/7] ext4: determine group descriptor size for 64bit feature Tom Rini
[U-Boot] [U-Boot, 4/7] ext4: Use correct descriptor size when reading the block group descriptor Tom Rini
[U-Boot] [U-Boot, 5/7] ext4: Use helper function to access group descriptor and its fields Tom Rini
[U-Boot] [U-Boot, 7/7] ext4: Revert rejection of 64bit enabled ext4 fs Tom Rini
[U-Boot] [U-Boot, v2, 3/7] ext4: Add helper functions for block group descriptor field access Tom Rini
[U-Boot] [U-Boot, v2, 6/7] ext4: Respect group descriptor size when adjusting free counts Tom Rini
[U-Boot] [U-Boot, v5, 01/16] ext4: fix possible crash on directory traversal, ignore deleted entries Tom Rini
[U-Boot] [U-Boot, v5, 02/16] ext4: propagate error if creation of directory entry fails Tom Rini
[U-Boot] [U-Boot, v5, 03/16] ext4: Do not crash when trying to grow a directory using extents Tom Rini
[U-Boot] [U-Boot, v5, 04/16] ext4: Scan all directory blocks for space when inserting a new entry Tom Rini
[U-Boot] [U-Boot, v5, 05/16] ext4: Avoid corruption of directories with hash tree indexes Tom Rini
[U-Boot] [U-Boot, v5, 06/16] ext4: Scan all directory blocks when looking up an entry Tom Rini
[U-Boot] [U-Boot, v5, 07/16] ext4: Only update number of of unused inodes if GDT_CSUM feature is set Tom Rini
[U-Boot] [U-Boot, v5, 08/16] ext4: Do not clear zalloc'ed buffers a second time Tom Rini
[U-Boot] [U-Boot, v5, 09/16] ext4: After completely filled group, scan next group from the beginning Tom Rini
[U-Boot] [U-Boot, v5, 10/16] ext4: Avoid out-of-bounds access of block bitmap Tom Rini
[U-Boot] [U-Boot, v5, 11/16] ext4: Fix memory leak in case of failure Tom Rini
[U-Boot] [U-Boot, v5, 12/16] ext4: Use correct value for inode size even on revision 0 filesystems Tom Rini
[U-Boot] [U-Boot, v5, 13/16] ext4: initialize full inode for inodes bigger than 128 bytes Tom Rini
[U-Boot] [U-Boot, v5, 14/16] ext4: remove duplicated block release code for extents Tom Rini
[U-Boot] [U-Boot, v5, 15/16] ext4: Correct block number handling, empty block vs. error code Tom Rini
[U-Boot] [U-Boot, v5, 16/16] ext4: Fix memory leak of journal buffer if block is updated multiple times Tom Rini
[U-Boot] [PATCH v2] common/xyzModem.c: Fix delay timeout calculation Tom Rini
[U-Boot] [PATCH 01/28] Remove some merge markers Tom Rini
[U-Boot] [PATCH 02/28] Convert SILENT_CONSOLE options to Kconfig Tom Rini
[U-Boot] [PATCH 03/28] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig Tom Rini
[U-Boot] [PATCH 05/28] config: Drop CONFIG_CONSOLE Tom Rini
[U-Boot] [PATCH 06/28] config: Drop CONFIG_CONSOLE_DEV Tom Rini
[U-Boot] [PATCH 04/28] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV et al to Kconfig Tom Rini
[U-Boot] [PATCH 07/28] Convert CONFIG_VIDEO to Kconfig Tom Rini
[U-Boot] [PATCH 08/28] Convert CONFIG_CFB_CONSOLE to Kconfig Tom Rini
[U-Boot] [PATCH 09/28] Convert CONFIG_CFB_CONSOLE_ANSI to Kconfig Tom Rini
[U-Boot] [PATCH 10/28] Convert CONFIG_VIDEO_CT69000 to Kconfig Tom Rini
[U-Boot] [PATCH 11/28] Convert CONFIG_SYS_CONSOLE_BG_COL et al to Kconfig Tom Rini
[U-Boot] [PATCH 12/28] video: Drop the smiLynxEM driver Tom Rini
[U-Boot] [PATCH 13/28] video: Drop the imx25lcdc driver Tom Rini
[U-Boot] [PATCH 14/28] video: Drop the s3c-fb driver Tom Rini
[U-Boot] [PATCH 15/28] video: Drop the sed13806 driver Tom Rini
[U-Boot] [PATCH 16/28] Convert CONFIG_VGA_AS_SINGLE_DEVICE to Kconfig Tom Rini
[U-Boot] [PATCH 18/28] Convert CONFIG_VIDEO_SW_CURSOR to Kconfig Tom Rini
[U-Boot] [PATCH 17/28] video: Drop CONFIG_VIDEO_HW_CURSOR Tom Rini
[U-Boot] [PATCH 19/28] video: Drop CONFIG_VIDEO_SW_CURSOR Tom Rini
[U-Boot] [PATCH 20/28] Convert CONFIG_CONSOLE_EXTRA_INFO to Kconfig Tom Rini
[U-Boot] [PATCH 21/28] video: Move video_get_info_str() prototype to a header file Tom Rini
[U-Boot] [PATCH 22/28] video: Drop CONFIG_CONSOLE_INFO_QUIET Tom Rini
[U-Boot] [PATCH 23/28] Convert CONFIG_LCD to Kconfig Tom Rini
[U-Boot] [PATCH 24/28] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig Tom Rini
[U-Boot] [PATCH 25/28] Convert CONFIG_SYS_CONSOLE_ENV_OVERWRITE to Kconfig Tom Rini
[U-Boot] [PATCH 26/28] Convert CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE to Kconfig Tom Rini
[U-Boot] [PATCH 27/28] Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig Tom Rini
[U-Boot] [PATCH 28/28] Convert CONFIG_SYS_STDIO_DEREGISTER to Kconfig Tom Rini
[U-Boot] [PATCH 00/28] Kconfig: Move console options to Kconfig Tom Rini
[U-Boot] [PATCH 02/28] Convert SILENT_CONSOLE options to Kconfig Tom Rini
[U-Boot] [PATCH 04/28] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV et al to Kconfig Tom Rini
[U-Boot] [PATCH 06/13] buildman: Tidy up the 'cloning' message Tom Rini
[U-Boot] [U-Boot, v3, 1/8] mmc: squash lines for immediate return Tom Rini
[U-Boot] [U-Boot, v3, 2/8] video: squash lines for immediate return Tom Rini
[U-Boot] [U-Boot, v3, 3/8] usb: replace ehci_*_remove() with usb_deregister() Tom Rini
[U-Boot] [U-Boot, v3, 4/8] usb: squash lines for immediate return Tom Rini
[U-Boot] [U-Boot, v3, 5/8] x86: squash lines for immediate return Tom Rini
[U-Boot] [U-Boot,v3,6/8] libfdt: simplify fdt_del_mem_rsv() Tom Rini
[U-Boot] [U-Boot, v3, 7/8] arch, board: squash lines for immediate return Tom Rini
[U-Boot] [U-Boot, v3, 8/8] drivers: squash lines for immediate return Tom Rini
[U-Boot] [U-Boot, RESEND, 01/10] treewide: use #include <...> to include public headers Tom Rini
[U-Boot] [U-Boot, RESEND, 02/10] Add <linux/errno.h> as a wrapper of <asm-generic/errno.h> Tom Rini
[U-Boot] [U-Boot, RESEND, 03/10] treewide: replace #include <asm/errno.h> with <linux/errno.h> Tom Rini
[U-Boot] [U-Boot, RESEND, 04/10] Remove arch/${ARCH}/include/asm/errno.h Tom Rini
[U-Boot] [U-Boot, RESEND, 05/10] treewide: replace #include <asm-generic/errno.h> with <linux/errno.h> Tom Rini
[U-Boot] [U-Boot, RESEND, 06/10] Move error macros from <asm-generic/errno.h> to <linux/errno.h> Tom Rini
[U-Boot] [U-Boot, RESEND, 07/10] Move ENOTSUPP defines to include/linux/errno.h Tom Rini
[U-Boot] [U-Boot, RESEND, 08/10] errno.h: sync error macros with linux 4.8-rc7 Tom Rini
[U-Boot] [U-Boot, RESEND, 09/10] reset: add no-op stubs for optional reset control Tom Rini
[U-Boot] [U-Boot, RESEND, 10/10] usb: ehci-generic: support reset control for generic EHCI Tom Rini
[U-Boot] Please pull u-boot-marvell/master Tom Rini
[U-Boot] [PATCH] dra7x: dfu: qspi: increase the qspi spl partition to 256K Tom Rini
[U-Boot] [PATCH 6/7] armv7: ls1021a: Convert CONFIG_LS1_DEEP_SLEEP to Kconfig option Tom Rini
[U-Boot] [PATCH 7/7] armv7: ls102xa: Rename GIC_ADDR and DCSR_RCPM_ADDR Tom Rini
[U-Boot] Please pull from u-boot-i2c Tom Rini
[U-Boot] Pull request: u-boot-coldfire/master Tom Rini
[U-Boot] Please pull fsl-qoriq master Tom Rini
[U-Boot] [U-Boot,v2] kconfig: introduce kconfig for UBI Tom Rini
[U-Boot] [PATCH] usb:gadget: Disallow DFU in SPL for now Tom Rini
[U-Boot] [PATCH 01/23] image: Use ram_top, not bi_memsize, in getenv_bootm_size Tom Rini
[U-Boot] U-Boot DFU test and Ctrl+C Tom Rini
[U-Boot] [PATCH 0/6] Add ARMv8 PSCI framework Tom Rini
[U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL Tom Rini
[U-Boot] [PATCH 1/2] ARM: dts: dra72: add rev C evm support Tom Rini
[U-Boot] [PATCH 2/2] board: ti: dra7xx: complex definitions should be protected with parentheses Tom Rini
[U-Boot] [PATCH 5/5] check-config: allow to complete build even with ad-hoc CONFIG options Tom Rini
[U-Boot] [PATCH 2/3] ARM: keystone: rename clk_get_rate() to ks_clk_get_rate() Tom Rini
[U-Boot] [PATCH 3/3] Revert "ns16650: Make sure we have CONFIG_CLK set before using infrastructure" Tom Rini
[U-Boot] [PATCH 1/3] ARM: keystone: remove declaration of unused functions Tom Rini
[U-Boot] [RFC] Rearrange CONFIG_* macros Tom Rini
[U-Boot] [RFC] Rearrange CONFIG_* macros Tom Rini
[U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program Tom Rini
[U-Boot] Pull request: u-boot-ubi/master Tom Rini
[U-Boot] Please pull u-boot-marvell/master Tom Rini
[U-Boot] Pull request, u-boot-tegra/master Tom Rini
[U-Boot] Please pull u-boot-ppc4xx/master Tom Rini
[U-Boot] dfu: Migrate to Kconfig Tom Rini
[U-Boot] ti_armv7_common.h: Adjust malloc pool size in all cases. Tom Rini
[U-Boot] [PATCH] usb:gadget: Disallow DFU in SPL for now Tom Rini
[U-Boot] [PATCH V2 1/8] tools: imximage: add plugin support Tom Rini
[U-Boot] [PATCH V2 2/8] imx: mx6: Add plugin support Tom Rini
[U-Boot] [PATCH V2 3/8] imx: mx7: Add plugin support Tom Rini
[U-Boot] [PATCH V2 4/8] imx-common: inctroude USE_IMXIMG_PLUGIN Kconfig Tom Rini
[U-Boot] [PATCH V2 5/8] imx-common: compile plugin code Tom Rini
[U-Boot] [PATCH V2 6/8] imx: mx6ullevk: support plugin Tom Rini
[U-Boot] [PATCH v2 06/27] spl: Kconfig: Move SPL_DISPLAY_PRINT to Kconfig Tom Rini
[U-Boot] [PATCH v2 07/27] spl: Convert boot_device into a struct Tom Rini
[U-Boot] [PATCH v2 08/27] spl: Add a way to declare an SPL image loader Tom Rini
[U-Boot] [PATCH v2 09/27] spl: Convert spl_ram_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 10/27] spl: Convert spl_mmc_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 11/27] spl: Convert spl_ubi_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 12/27] spl: Convert spl_nand_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 13/27] spl: Convert spl_onenand_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 14/27] spl: Convert spl_nor_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 15/27] spl: Convert spl_ymodem_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 16/27] spl: Convert spl_usb_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 17/27] spl: Convert spl_sata_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 19/27] spl: Convert spl_spi_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 20/27] spi: Move freescale-specific code into a private header Tom Rini
[U-Boot] [PATCH v2 21/27] spl: Convert spl_net_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 22/27] spl: Convert spl_board_load_image() to use linker list Tom Rini
[U-Boot] [PATCH v2 02/29] Convert SILENT_CONSOLE options to Kconfig Tom Rini
[U-Boot] [PATCH v2 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig Tom Rini
[U-Boot] [PATCH v2 04/29] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV et al to Kconfig Tom Rini
[U-Boot] [PATCH v2 08/29] Convert CONFIG_CFB_CONSOLE to Kconfig Tom Rini
[U-Boot] [PATCH v2 16/29] Convert CONFIG_VGA_AS_SINGLE_DEVICE to Kconfig Tom Rini
[U-Boot] [PATCH v2 27/29] Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig Tom Rini
[U-Boot] [PATCH v2 28/29] Convert CONFIG_USB_KEYBOARD to Kconfig Tom Rini
[U-Boot] [PATCH v2 29/29] Convert CONFIG_SYS_STDIO_DEREGISTER to Kconfig Tom Rini
[U-Boot] [PATCH V2 6/8] imx: mx6ullevk: support plugin Tom Rini
[U-Boot] [PATCH v2 11/12] RFC: Use binman for a sunxi board Tom Rini
[U-Boot] [bug report] sunxi: booting from eMMC Maxime Ripard
[U-Boot] [bug report] sunxi: booting from eMMC Maxime Ripard
[U-Boot] [bug report] sunxi: booting from eMMC Maxime Ripard
[U-Boot] [bug report] sunxi: booting from eMMC Maxime Ripard
[U-Boot] [bug report] sunxi: booting from eMMC Maxime Ripard
[U-Boot] [PATCH] x86: conga-qeval20-qa3: Add README to explain the console UART options Stefan Roese
[U-Boot] [PATCH] Various, accumulated typos collected from around the tree. Stefan Roese
[U-Boot] [PATCH v2] x86: conga-qeval20-qa3: Add README to explain the console UART options Stefan Roese
[U-Boot] [PATCH] sf: fix sf probe Stefan Roese
[U-Boot] [PATCH] image-fit: switch ENOLINK to ENOENT Stefan Roese
[U-Boot] [PATCH] x86: baytrail: Add 2nd eMMC controller to the PCI probe list Stefan Roese
[U-Boot] [PATCH 1/7] i2c: mv_i2c.c: cosmetic: Coding style cleanups Stefan Roese
[U-Boot] [PATCH 2/7] i2c: mv_i2c.c: Remove CONFIG_HARD_I2C Stefan Roese
[U-Boot] [PATCH 3/7] i2c: mv_i2c.c: Prepare driver for DM conversion Stefan Roese
[U-Boot] [PATCH 4/7] i2c: mv_i2c.c: Add DM support Stefan Roese
[U-Boot] [PATCH 5/7] i2c: mv_i2c.c: Enable runtime speed selection (standard vs fast mode) Stefan Roese
[U-Boot] [PATCH 6/7] i2c: mv_i2c.c: Validate read length in I2C command Stefan Roese
[U-Boot] [PATCH 7/7] i2c: mvtwsi.c: Add support for Marvell Armada 7K/8K Stefan Roese
[U-Boot] [PATCH 01/15] serial: Add serial_mvebu_a3700 for Armada 3700 SoC Stefan Roese
[U-Boot] [PATCH 02/15] spi: Add driver for Marvell Armada 3700 SoC Stefan Roese
[U-Boot] [PATCH 03/15] net: mvneta: Make driver 64bit safe Stefan Roese
[U-Boot] [PATCH 04/15] net: mvneta: Add support for Armada 3700 SoC Stefan Roese
[U-Boot] [PATCH 05/15] usb: xhci: Add Marvell MVEBU xHCI support Stefan Roese
[U-Boot] [PATCH 06/15] usb: ehci: ehci-marvell.c: Add Armada 3700 support (ARMv8) Stefan Roese
[U-Boot] [PATCH 07/15] drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 3k Stefan Roese
[U-Boot] [PATCH 08/15] arm64: mvebu: Armada 3700: Add Armada 37xx dts files Stefan Roese
[U-Boot] [PATCH 09/15] arm64: mvebu: Armada 3700: Add SPI device tree nodes Stefan Roese
[U-Boot] [PATCH 10/15] arm64: mvebu: Armada 3700: Add ethernet device tree nodes Stefan Roese
[U-Boot] [PATCH 11/15] arm64: mvebu: Armada 3700: Add I2C device tree nodes Stefan Roese
[U-Boot] [PATCH 12/15] arm64: mvebu: Armada 3700: Add COMPHY device tree nodes Stefan Roese
[U-Boot] [PATCH 13/15] arm64: mvebu: Armada 3700: Add USB device tree nodes Stefan Roese
[U-Boot] [PATCH 14/15] arm64: mvebu: Add support for the Marvell Armada 3700 SoC Stefan Roese
[U-Boot] [PATCH 15/15] arm64: mvebu: Add Armada 3700 db-88f3720 development board support Stefan Roese
[U-Boot] [PATCH 1/9] drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 7K/8K Stefan Roese
[U-Boot] [PATCH 2/9] usb: xhci-mvebu: Add Armada 8K to compatiblity list Stefan Roese
[U-Boot] [PATCH 3/9] ahci: Make ahci_port_base() non-static to enable overwrite Stefan Roese
[U-Boot] [PATCH 4/9] arm64: mvebu: Armada 7K/8K: Add Armada 7K/8K dts files Stefan Roese
[U-Boot] [PATCH 5/9] arm64: mvebu: Add basic support for the Marvell Armada 7K/8K SoC Stefan Roese
[U-Boot] [PATCH 6/9] arm64: mvebu: Add Armada 7K db-88f7040 development board support Stefan Roese
[U-Boot] [PATCH 7/9] arm64: mvebu: armada-ap806.dtsi: Add clock-frequency to UART DT node Stefan Roese
[U-Boot] [PATCH 8/9] arm64: mvebu: Armada 7K/8K: Add COMPHY device tree nodes Stefan Roese
[U-Boot] [PATCH 9/9] arm64: mvebu: armada-7040-db.dts: Add I2C and SPI aliases Stefan Roese
[U-Boot] [PATCH 06/15] usb: ehci: ehci-marvell.c: Add Armada 3700 support (ARMv8) Stefan Roese
[U-Boot] [PATCH] WIP: usb: xhci-pci: Add DM support Stefan Roese
[U-Boot] [PATCH 1/5] arm: mvebu: add support for Synology DS109 board Stefan Roese
[U-Boot] [PATCH v1 2/3] arm: mvebu: add DB-88F6820-AMC board Stefan Roese
[U-Boot] [PATCH] image-fit: Fix fit_get_node_from_config semantics Stefan Roese
[U-Boot] [PATCH 2/2] mmc: sdhci: use the generic error number Stefan Roese
[U-Boot] [PATCH 03/15] net: mvneta: Make driver 64bit safe Stefan Roese
[U-Boot] [PATCH 04/15 v2] net: mvneta: Add support for Armada 3700 SoC Stefan Roese
[U-Boot] [PATCH 09/15 v2] arm64: mvebu: Armada 3700: Add SPI device tree nodes Stefan Roese
[U-Boot] [PATCH 02/15] spi: Add driver for Marvell Armada 3700 SoC Stefan Roese
[U-Boot] [PATCH 02/15 v2] spi: Add driver for Marvell Armada 3700 SoC Stefan Roese
[U-Boot] [PATCH 02/15 v2] spi: Add driver for Marvell Armada 3700 SoC Stefan Roese
[U-Boot] [PATCH 02/15 v3] spi: Add driver for Marvell Armada 3700 SoC Stefan Roese
[U-Boot] [PATCH 02/15 v3] spi: Add driver for Marvell Armada 3700 SoC Stefan Roese
[U-Boot] [PATCH] arm: mvebu: theadorable: Configure board for PCIe 2.0 capability Stefan Roese
[U-Boot] [PATCH v2 1/3] arm: mvebu: create generic 88F6820 config option Stefan Roese
[U-Boot] [PATCH v2 2/3] arm: mvebu: add DB-88F6820-AMC board Stefan Roese
[U-Boot] [PATCH v2 3/3] arm: mvebu: NAND support for DB-88F6820-AMC Stefan Roese
[U-Boot] Please pull u-boot-marvell/master Stefan Roese
[U-Boot] [PATCH] x86: baytrail: Add 2nd eMMC controller to the PCI probe list Stefan Roese
[U-Boot] [PATCH v2] x86: baytrail: Add 2nd eMMC controller to the PCI probe list Stefan Roese
[U-Boot] [PATCH v2 1/3] arm: mvebu: create generic 88F6820 config option Stefan Roese
[U-Boot] x86: Booting Linux v4.7+ broken Stefan Roese
[U-Boot] Please pull u-boot-marvell/master Stefan Roese
[U-Boot] [PATCH] CPCI4052: Remove CONFIG_AUTO_COMPLETE and custom baud rate table Stefan Roese
[U-Boot] Please pull u-boot-ppc4xx/master Stefan Roese
[U-Boot] [PATCH] x86: Fix Linux v4.7+ zimage booting (update bootparam.h) Stefan Roese
[U-Boot] [PATCH v2] x86: Fix Linux v4.7+ zimage booting (update bootparam.h) Stefan Roese
[U-Boot] U-boot Driver Model - MMC - missing uclass implementation? Philipp Rossak
[U-Boot] U-boot Driver Model - MMC - missing uclass implementation? Philipp Rossak
[U-Boot] "_ENTRY" is both a struct and a typedef? Måns Rullgård
[U-Boot] U-boot bad block table Rumsey, Carl A. (GSFC-408.0)[SGT INC]
[U-Boot] [U-Boot-DM] FPGA driver over PCI bus Max Ruttenberg
[U-Boot] [U-Boot-DM] FPGA driver over PCI bus Max Ruttenberg
[U-Boot] Building u-boot.imx and SPL simultaneously Otavio Salvador
[U-Boot] Building u-boot.imx and SPL simultaneously Otavio Salvador
[U-Boot] ext4 delete file fails when ext4 extents enabled in filesystem Thomas Schaefer
[U-Boot] ext4 delete file fails when ext4 extents enabled in filesystem Thomas Schaefer
[U-Boot] [PATCHv5 0/4] Add Avionic Design Meerkat/Tegra K1 support Julian Scheel
[U-Boot] [PATCHv5 1/4] Revert "tegra: Add support for setting up a as3722 PMIC" Julian Scheel
[U-Boot] [PATCHv5 2/4] power: as3722: Allow using on any i2c bus with any address Julian Scheel
[U-Boot] [PATCHv5 3/4] ARM: tegra124: Add an option to disable CoreSight Julian Scheel
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Julian Scheel
[U-Boot] [PATCHv5 1/4] Revert "tegra: Add support for setting up a as3722 PMIC" Julian Scheel
[U-Boot] [PATCHv5 3/4] ARM: tegra124: Add an option to disable CoreSight Julian Scheel
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Julian Scheel
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Julian Scheel
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Julian Scheel
[U-Boot] [PATCHv5 1/4] Revert "tegra: Add support for setting up a as3722 PMIC" Julian Scheel
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Julian Scheel
[U-Boot] [PATCHv5 1/4] Revert "tegra: Add support for setting up a as3722 PMIC" Julian Scheel
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Julian Scheel
[U-Boot] [PATCH] net: write enetaddr down to hardware on env_callback Hannes Schmelzer
[U-Boot] [PATCH] cmd/fdt: add possibilty to have 'extrasize' on fdt resize Hannes Schmelzer
[U-Boot] [PATCH] net: write enetaddr down to hardware on env_callback Hannes Schmelzer
[U-Boot] [PATCH] net: write enetaddr down to hardware on env_callback Hannes Schmelzer
[U-Boot] Antwort: Re: Re: Re: [PATCH] net: write enetaddr down to hardware on env_callback Hannes Schmelzer
[U-Boot] [RFC PATCH] common, kconfig: move VERSION_VARIABLE to Kconfig Hannes Schmelzer
[U-Boot] Antwort: Re: [PATCH] cmd/fdt: add possibilty to have 'extrasize' on fdt resize Hannes Schmelzer
[U-Boot] [PATCH v2] cmd/fdt: add possibilty to have 'extrasize' on fdt resize Hannes Schmelzer
[U-Boot] [PATCH] getting ubifs to run Heiko Schocher
[U-Boot] [PATCH] treewide: compress lines for immediate return Heiko Schocher
[U-Boot] UBI and UBIFS on ARM64 Heiko Schocher
[U-Boot] UBI and UBIFS on ARM64 Heiko Schocher
[U-Boot] UBI and UBIFS on ARM64 Heiko Schocher
[U-Boot] [RFC PATCH] common, kconfig: move VERSION_VARIABLE to Kconfig Heiko Schocher
[U-Boot] [ANN] U-Boot v2016.09 is released Heiko Schocher
[U-Boot] [PATCH v3 00/45] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Heiko Schocher
[U-Boot] Please pull from u-boot-i2c Heiko Schocher
[U-Boot] [PATCH v3] net: Fix cache misalignment message after network load operations Heiko Schocher
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Heiko Schocher
[U-Boot] [PATCH v3 00/45] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Heiko Schocher
[U-Boot] [PATCH v2 4/7] i2c: at91_i2c: Remove unneccessary clock calling Heiko Schocher
[U-Boot] [PATCH v2 5/7] i2c: at91_i2c: Change error return -ENODEV to -EINVAL Heiko Schocher
[U-Boot] [PATCH] PWM: Correct misspellings of "module" in context of PWM Heiko Schocher
[U-Boot] [PATCH v1] ARM: dts: Makefile: Use board to decide to compile dts Heiko Schocher
[U-Boot] [PATCH v3 1/6] dm: i2c: Add u8 read/write i2c functions Heiko Schocher
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Heiko Schocher
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Heiko Schocher
[U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI Heiko Schocher
[U-Boot] [PATCH v2] kconfig: introduce kconfig for UBI Heiko Schocher
[U-Boot] [PATCH 27/82] x86: i2c: Fix cast of address to 32-bit value Heiko Schocher
[U-Boot] [PATCH] getting ubifs to run Heiko Schocher
[U-Boot] Curses from u-boot Heiko Schocher
[U-Boot] [PATCH] getting ubifs to run Heiko Schocher
[U-Boot] Please pull from u-boot-i2c Heiko Schocher
[U-Boot] Pull request: u-boot-ubi/master Heiko Schocher
[U-Boot] [PATCH v3 01/29] Remove some merge markers Heiko Schocher
[U-Boot] [PATCH v3 02/29] Convert SILENT_CONSOLE options to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 05/29] config: Drop CONFIG_CONSOLE Heiko Schocher
[U-Boot] [PATCH v3 06/29] config: Drop CONFIG_CONSOLE_DEV Heiko Schocher
[U-Boot] [PATCH v3 07/29] Convert CONFIG_VIDEO to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 08/29] Convert CONFIG_CFB_CONSOLE to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 09/29] Convert CONFIG_CFB_CONSOLE_ANSI to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 10/29] Convert CONFIG_VIDEO_CT69000 to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 11/29] Convert CONFIG_SYS_CONSOLE_BG_COL et al to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 12/29] video: Drop the smiLynxEM driver Heiko Schocher
[U-Boot] [PATCH v3 13/29] video: Drop the imx25lcdc driver Heiko Schocher
[U-Boot] [PATCH v3 14/29] video: Drop the s3c-fb driver Heiko Schocher
[U-Boot] [PATCH v3 15/29] video: Drop the sed13806 driver Heiko Schocher
[U-Boot] [PATCH v3 16/29] Convert CONFIG_VGA_AS_SINGLE_DEVICE to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 17/29] video: Drop CONFIG_VIDEO_HW_CURSOR Heiko Schocher
[U-Boot] [PATCH v3 18/29] Convert CONFIG_VIDEO_SW_CURSOR to Kconfig Heiko Schocher
[U-Boot] [PATCH 0/6] at91: at91sam9g15 improvements Heiko Schocher
[U-Boot] [PATCH v3 20/29] Convert CONFIG_CONSOLE_EXTRA_INFO to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 21/29] video: Move video_get_info_str() prototype to a header file Heiko Schocher
[U-Boot] [PATCH v3 22/29] video: Drop CONFIG_CONSOLE_INFO_QUIET Heiko Schocher
[U-Boot] [PATCH v3 23/29] Convert CONFIG_LCD to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 26/29] Convert CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE to Kconfig Heiko Schocher
[U-Boot] [PATCH v3 27/29] Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig Heiko Schocher
[U-Boot] [PATCH] eth: asix88179: Reset device during probe with DM_ETH enabled Nikolaus Schulz
[U-Boot] [PATCH 1/5] arm: mvebu: add support for Synology DS109 board Walter Schweizer
[U-Boot] [PATCH 2/5] arm: mvebu: ds109 board is maintained Walter Schweizer
[U-Boot] [PATCH 3/5] arm: mvebu: fix kirkwood initial setup Walter Schweizer
[U-Boot] [PATCH 4/5] arm: mvebu: fix output enable settings Walter Schweizer
[U-Boot] [PATCH 5/5] arm: mvebu: fix Synology board tag Walter Schweizer
[U-Boot] [PATCH v7 12/12] boston: Introduce support for the MIPS Boston development board Daniel Schwierzeck
[U-Boot] [PATCH v2 04/10] MIPS: Enable use of the instruction cache earlier Daniel Schwierzeck
[U-Boot] [PATCH v2 09/10] MIPS: L2 cache support Daniel Schwierzeck
[U-Boot] [ANN] U-Boot v2016.09 is released Daniel Schwierzeck
[U-Boot] [PATCH] MIPS: Hang if run on a secondary CPU Daniel Schwierzeck
[U-Boot] [PATCH v4] MIPS: Hang if run on a secondary CPU Daniel Schwierzeck
[U-Boot] [GIT PULL] u-boot-mips/master Daniel Schwierzeck
[U-Boot] [PATCH 0/9] MIPS: improve start.S and add exception support Daniel Schwierzeck
[U-Boot] [PATCH 1/9] MIPS: make inclusion of ROM exception vectors configurable Daniel Schwierzeck
[U-Boot] [PATCH 2/9] MIPS: fix ROM exception vectors Daniel Schwierzeck
[U-Boot] [PATCH 3/9] MIPS: fix iand optimize setup of CP0 registers Daniel Schwierzeck
[U-Boot] [PATCH 4/9] MIPS: factor out code for initial stack and global data Daniel Schwierzeck
[U-Boot] [PATCH 5/9] MIPS: add possibility to setup initial stack and global data in SRAM Daniel Schwierzeck
[U-Boot] [PATCH 6/9] MIPS: add asm-offsets for struct pt_regs Daniel Schwierzeck
[U-Boot] [PATCH 7/9] MIPS: reserve space for exception vectors Daniel Schwierzeck
[U-Boot] [PATCH 8/9] MIPS: add handling for generic and EJTAG exceptions Daniel Schwierzeck
[U-Boot] [PATCH 9/9] common/board_f: enable initr_trap for MIPS Daniel Schwierzeck
[U-Boot] [PATCH 8/9] MIPS: add handling for generic and EJTAG exceptions Daniel Schwierzeck
[U-Boot] [PATCH 2/9] MIPS: fix ROM exception vectors Daniel Schwierzeck
[U-Boot] [PATCH 17/23] MIPS: Make CM GCR base configurable Daniel Schwierzeck
[U-Boot] [PATCH 19/23] boston: Setup memory ranges in FDT provided to Linux Daniel Schwierzeck
[U-Boot] [PATCH 07/23] pci: Handle MIPS systems with virtual CONFIG_SYS_SDRAM_BASE Daniel Schwierzeck
[U-Boot] [PATCH 01/23] image: Use ram_top, not bi_memsize, in getenv_bootm_size Daniel Schwierzeck
[U-Boot] Asix USB Ethernet not working with DriverModel Joshua Scott
[U-Boot] [PATCH] net: asix: Fix AX88772B when used with DriverModel Joshua Scott
[U-Boot] [PATCH 04/11] arm: socfpga: clkmgr: Segregate the Clock Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH 05/11] arm: socfpga: fpgamgr: Segregate the FPGA Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH 06/11] arm: socfpga: misc: Segregate the misc.c for Stratix 10 Chin Liang See
[U-Boot] [PATCH 09/11] arm: socfpga: stratix10: Add board folder for Stratix 10 socdk Chin Liang See
[U-Boot] [PATCH 11/11] arm: socfpga: Add support for Stratix 10 SoC dev kit Chin Liang See
[U-Boot] [PATCH 07/11] arm: socfpga: sysmgr: Fix casting warning when enabling ARM64 Chin Liang See
[U-Boot] [PATCH v2 00/11] Add support for Stratix 10 SoC Chin Liang See
[U-Boot] [PATCH v2 01/11] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Chin Liang See
[U-Boot] [PATCH v2 02/11] arm: socfpga: rstmgr: Add Reset Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH v2 03/11] arm: socfpga: rstmgr: Separate the Reset Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH v2 04/11] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH v2 05/11] arm: socfpga: fpgamgr: Disable FPGA Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH v2 06/11] arm: socfpga: misc: Separate the misc.c for Stratix 10 Chin Liang See
[U-Boot] [PATCH v2 07/11] arm: socfpga: sysmgr: Fix casting warning when enabling ARM64 Chin Liang See
[U-Boot] [PATCH v2 08/11] arm: socfpga: mmu: Add memory map layout for Stratix 10 SoC Chin Liang See
[U-Boot] [PATCH v2 09/11] arm: socfpga: stratix10: Add board directory for Stratix 10 socdk Chin Liang See
[U-Boot] [PATCH v2 10/11] arm: dts: socfpga: Add dts for Stratix 10 socdk Chin Liang See
[U-Boot] [PATCH v2 11/11] arm: socfpga: Add support for Stratix 10 SoC dev kit Chin Liang See
[U-Boot] [PATCH 04/11] arm: socfpga: clkmgr: Segregate the Clock Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH 06/11] arm: socfpga: misc: Segregate the misc.c for Stratix 10 Chin Liang See
[U-Boot] [PATCH 07/11] arm: socfpga: sysmgr: Fix casting warning when enabling ARM64 Chin Liang See
[U-Boot] [PATCH 11/11] arm: socfpga: Add support for Stratix 10 SoC dev kit Chin Liang See
[U-Boot] [PATCH v2 01/11] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Chin Liang See
[U-Boot] [PATCH v2 09/11] arm: socfpga: stratix10: Add board directory for Stratix 10 socdk Chin Liang See
[U-Boot] [PATCH v2 10/11] arm: dts: socfpga: Add dts for Stratix 10 socdk Chin Liang See
[U-Boot] [PATCH v2 11/11] arm: socfpga: Add support for Stratix 10 SoC dev kit Chin Liang See
[U-Boot] [PATCH 1/9] ddr: altera: Configuring SDRAM extra cycles timing parameters Chin Liang See
[U-Boot] [PATCH 2/9] arm: socfpga: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 3/9] arm: socfpga: mcvevk: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 4/9] arm: socfpga: socrates: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 5/9] arm: socfpga: is1: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 6/9] arm: socfpga: vining_fpga: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 7/9] arm: socfpga: sr1500: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 8/9] arm: socfpga: de0-nano-soc: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 9/9] arm: socfpga: sockit: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 1/9] ddr: altera: Configuring SDRAM extra cycles timing parameters Chin Liang See
[U-Boot] [PATCH 2/9] arm: socfpga: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 3/9] arm: socfpga: mcvevk: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 4/9] arm: socfpga: socrates: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 2/9] arm: socfpga: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH 1/9] ddr: altera: Configuring SDRAM extra cycles timing parameters Chin Liang See
[U-Boot] [PATCH v2] ddr: altera: Configuring SDRAM extra cycles timing parameters Chin Liang See
[U-Boot] [PATCH 2/9] arm: socfpga: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH v2] ddr: altera: Configuring SDRAM extra cycles timing parameters Chin Liang See
[U-Boot] [PATCH v3 1/9] ddr: altera: Configuring SDRAM extra cycles timing parameters Chin Liang See
[U-Boot] [PATCH v3 2/9] arm: socfpga: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH v3 3/9] arm: socfpga: mcvevk: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH v3 4/9] arm: socfpga: socrates: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH v3 5/9] arm: socfpga: is1: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH v3 6/9] arm: socfpga: vining_fpga: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH v3 7/9] arm: socfpga: sr1500: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH v3 8/9] arm: socfpga: de0-nano-soc: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH v3 9/9] arm: socfpga: sockit: Adding handoff for SDRAM ctrlcfg.extratime1 Chin Liang See
[U-Boot] [PATCH] doc: socfpga: Update README.socfpga for Preloader development flow Chin Liang See
[U-Boot] [PATCH] doc: socfpga: Update README.socfpga for Preloader development flow Chin Liang See
[U-Boot] [PATCH 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO Enric Balletbo Serra
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Enric Balletbo Serra
[U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Enric Balletbo Serra
[U-Boot] [PATCH] ARM: Respect CONFIG_SPL_STACK define in lowlevel_init.S Siarhei Siamashka
[U-Boot] [PATCH 1/4] Revert "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Siarhei Siamashka
[U-Boot] [PATCH 2/4] Revert "sunxi: Downclock AHB1 to 100MHz on Allwinner A64" Siarhei Siamashka
[U-Boot] [PATCH 4/4] sunxi: fix 64-bit compiler warning for SPL header parsing Siarhei Siamashka
[U-Boot] [PATCH 1/4] Revert "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Siarhei Siamashka
[U-Boot] [PATCH v3 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig Siarhei Siamashka
[U-Boot] [PATCH] ARM64: zynqmp: Force certain bootmode for SPL Michal Simek
[U-Boot] [PATCH] ARM64: zynqmp: Fix usb_gadget_handle_interrupt routine Michal Simek
[U-Boot] [PATCH] spi: zynq: Use variable to remove u32 to u64 conversions Michal Simek
[U-Boot] [PATCH] ARM64: zynqmp: Move BSS location to the beginning of ram Michal Simek
[U-Boot] [PATCH 1/4] ARM64: zynqmp: Add USB boot mode Michal Simek
[U-Boot] [PATCH 2/4] ARM64: zynqmp: Add support for DFU from SPL Michal Simek
[U-Boot] [PATCH 3/4] ARM64: zynqmp: Add support for USB ulpi phy reset via mode pins Michal Simek
[U-Boot] [PATCH 4/4] ARM64: zynqmp: Fix USB ulpi phy sequence Michal Simek
[U-Boot] [PATCH 1/2] fpga: xilinx: zynqmp: Add PL bitstream download support for ZynqMP Michal Simek
[U-Boot] [PATCH 2/2] ARM64: zynqmp: Add support for chip ID detection Michal Simek
[U-Boot] ZynqMP breakage Michal Simek
[U-Boot] why does only zynqmp check GD_FLG_ENV_DEFAULT? Michal Simek
[U-Boot] [RFC PATCH 1/2] dm: Add support for scsi/sata based devices Michal Simek
[U-Boot] [RFC PATCH 2/2] block: Move ceva driver to DM Michal Simek
[U-Boot] ZynqMP breakage Michal Simek
[U-Boot] [ANN] U-Boot v2016.09 is released Michal Simek
[U-Boot] [GIT PULL] Xilinx changes Michal Simek
[U-Boot] [PATCH 0/2] Add TOPIC Miami boards Michal Simek
[U-Boot] [PATCH 1/2] Add topic-miami board support Michal Simek
[U-Boot] [ANN] U-Boot v2016.09 is released Michal Simek
[U-Boot] [PATCH] fpga: Add Kconfig to fpga subsystem Michal Simek
[U-Boot] [GIT PULL] Xilinx changes Michal Simek
[U-Boot] [PATCH] ARM64: zynqmp: Resync with savedefconfig Michal Simek
[U-Boot] [PATCH v2] fpga: xilinx: zynqmp: Add PL bitstream download support for ZynqMP Michal Simek
[U-Boot] [PATCH 0/2] Add TOPIC Miami boards Michal Simek
[U-Boot] [PATCH] ARM64: zynqmp: Use the same name for atf image everywhere Michal Simek
[U-Boot] [GIT PULL] Xilinx changes v2 Michal Simek
[U-Boot] [PATCH] tools: mkimage: Add support for initialization table for Zynq and ZynqMP Michal Simek
[U-Boot] [RFC PATCH 1/2] dm: Add support for scsi/sata based devices Michal Simek
[U-Boot] [PATCH] tools: mkimage: Add support for initialization table for Zynq and ZynqMP Michal Simek
[U-Boot] [PATCH v2 1/2] mtd: nand : zynq_nand: Add nand driver support for zynq Michal Simek
[U-Boot] [RFC PATCH 2/2] block: Move ceva driver to DM Michal Simek
[U-Boot] [RFC PATCH 1/2] dm: Add support for scsi/sata based devices Michal Simek
[U-Boot] [RFC PATCH 1/2] dm: Add support for scsi/sata based devices Michal Simek
[U-Boot] [PATCH RESEND] phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID Michal Simek
[U-Boot] [PATCH] mach-zynq/Kconfig: Make SYS_VENDOR configurable Michal Simek
[U-Boot] [PATCH v2] tools: mkimage: Add support for initialization table for Zynq and ZynqMP Michal Simek
[U-Boot] [PATCH] image-fit: switch ENOLINK to ENOENT Mario Six
[U-Boot] [PATCH] image-fit: switch ENOLINK to ENOENT Mario Six
[U-Boot] [PATCH] image: Fix expected return value Mario Six
[U-Boot] U-Boot memory allocation problems with ast2500 Maxim Sloyko
[U-Boot] U-Boot memory allocation problems with ast2500 Maxim Sloyko
[U-Boot] U-Boot memory allocation problems with ast2500 Maxim Sloyko
[U-Boot] [PATCH v2 0/7] Adds support for secure boot on Keystone SoCs (K2E) Madan Srinivas
[U-Boot] [PATCH v2 1/7] include: image.h: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS Madan Srinivas
[U-Boot] [PATCH v2 2/7] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs Madan Srinivas
[U-Boot] [PATCH v2 3/7] arm: omap-common: adds secure image name common to OMAP and keystone Madan Srinivas
[U-Boot] [PATCH v2 4/7] arm: omap-common: Enable support for K2 HS devices in u-boot Madan Srinivas
[U-Boot] [PATCH v2 5/7] arm: mach-keystone: config.mk: Adds support for secure images on K2 Madan Srinivas
[U-Boot] [PATCH v2 6/7] doc: Updates info on using keystone secure devices from TI Madan Srinivas
[U-Boot] [PATCH v2 7/7] configs: Adds a defconfig for K2E High Security EVM Madan Srinivas
[U-Boot] [PATCH v2 0/7] Adds support for secure boot on Keystone SoCs (K2E) Srinivas, Madan
[U-Boot] [PATCH v2 2/7] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs Srinivas, Madan
[U-Boot] [PATCH v3 0/7] Adds support for secure boot on Keystone SoCs (K2E) Srinivas, Madan
[U-Boot] [PATCH v3 1/7] include: image.h: Fixes build warning with, CONFIG_FIT_IMAGE_POST_PROCESS Srinivas, Madan
[U-Boot] [PATCH RESEND v3 2/7] arm: mach-keystone: Implements FIT post-processing, call for keystone SoCs Srinivas, Madan
[U-Boot] [PATCH v3 3/7] arm: omap-common: adds secure image name common to, OMAP and keystone Srinivas, Madan
[U-Boot] [PATCH v3 4/7] arm: omap-common: Enable support for K2 HS devices in, u-boot Srinivas, Madan
[U-Boot] [PATCH v3 5/7] arm: mach-keystone: config.mk: Adds support for secure, images on K2 Srinivas, Madan
[U-Boot] [PATCH v3 6/7] doc: Updates info on using keystone secure devices, from TI Srinivas, Madan
[U-Boot] [PATCH v3 7/7] configs: Adds a defconfig for K2E High Security EVM Srinivas, Madan
[U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288 Heiko Stübner
[U-Boot] [PATCH] armv8: fsl-layerscape: Fix "cpu status" command York Sun
[U-Boot] [RFC Patch 0/5] Resolve conflict for merging York Sun
[U-Boot] [RFC Patch 1/5] armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046A York Sun
[U-Boot] [RFC Patch 2/5] driver: ddr: fsl_mmdc: Pass board parameters through data structure York Sun
[U-Boot] [RFC Patch 3/5] armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021A York Sun
[U-Boot] [RFC Patch 4/5] Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig option York Sun
[U-Boot] [RFC Patch 5/5] armv8: ls1046ardb_emmc: Fix a typo in defconfig York Sun
[U-Boot] [Patch 0/7] Resolve conflict for merging York Sun
[U-Boot] [PATCH 1/7] armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046A York Sun
[U-Boot] [PATCH 2/7] driver: ddr: fsl_mmdc: Pass board parameters through data structure York Sun
[U-Boot] [PATCH 3/7] armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021A York Sun
[U-Boot] [PATCH 4/7] Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig option York Sun
[U-Boot] [PATCH 5/7] armv8: ls1046ardb_emmc: Fix a typo in defconfig York Sun
[U-Boot] [PATCH 6/7] armv7: ls1021a: Convert CONFIG_LS1_DEEP_SLEEP to Kconfig option York Sun
[U-Boot] [PATCH 7/7] armv7: ls102xa: Rename GIC_ADDR and DCSR_RCPM_ADDR York Sun
[U-Boot] [[RFC Patch] 1/2] tools: buildmand: Remove duplicated code York Sun
[U-Boot] [[RFC Patch] 2/2] tools: buildman: Add compiler wrapper York Sun
[U-Boot] [RFC PATCH 0/6] Move some config macros to Kconfig York Sun
[U-Boot] [RFC PATCH 1/6] arm: Fix Kconfig for proper display menu York Sun
[U-Boot] [RFC PATCH 2/6] arm: Move FSL_LSCH2 FSL_LSCH3 to Kconfig York Sun
[U-Boot] [RFC PATCH 3/6] arm: Move MAX_CPUS to Kconfig York Sun
[U-Boot] [RFC PATCH 4/6] arm: Move SYS_FSL_IFC_BANK_COUNT to Kconfig York Sun
[U-Boot] [RFC PATCH 5/6] arm: Move FSL_HAS_DP_DDR and NUM_DDR_CONTROLLERS to Kconfig York Sun
[U-Boot] [RFC PATCH 6/6] arm: Move SYS_FSL_SRDS_* and SYS_HAS_SERDES to Kconfig York Sun
[U-Boot] [PATCH 0/5] imx6ul: Board updates Jagan Teki
[U-Boot] [PATCH 1/5] imx: mx6ul: Refactor common code as mx6ul Jagan Teki
[U-Boot] [PATCH 2/5] configs: mx6ul: Update comment in license notes Jagan Teki
[U-Boot] [PATCH 3/5] spi: Kconfig: Move FSL_QSPI entry to non-dm place Jagan Teki
[U-Boot] [PATCH 4/5] configs: mx6ul: Move SPI/SPI-FLASH configs to defconfig Jagan Teki
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Jagan Teki
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Jagan Teki
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Jagan Teki
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Jagan Teki
[U-Boot] [PATCH 1/5] imx: mx6ul: Refactor common code as mx6ul Jagan Teki
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Jagan Teki
[U-Boot] [PATCH] spi: zynq: Use variable to remove u32 to u64 conversions Jagan Teki
[U-Boot] [PATCH 2/2] spi: ti_qspi: Remove unnecessary udelay for AM437x Jagan Teki
[U-Boot] [PATCH 1/2] spi: ti_qspi: use 128 bit transfer mode when writing to flash Jagan Teki
[U-Boot] [PATCH 21/21] arm: imx: add i.MX6ULL 14x14 EVK board support Jagan Teki
[U-Boot] [PATCH v2 1/2] spi: ti_qspi: use 128 bit transfer mode when writing to flash Jagan Teki
[U-Boot] [PATCH] Various, accumulated typos collected from around the tree. Jagan Teki
[U-Boot] [PATCH 0/5] imx: Add Engicam i.CoreM6 QDL modules support Jagan Teki
[U-Boot] [PATCH 1/5] imx: iomux-v3: Fix build error with snvs base Jagan Teki
[U-Boot] [PATCH 2/5] serial: Kconfig: Add MXC_UART entry Jagan Teki
[U-Boot] [PATCH 3/5] thermal: Kconfig: Add IMX_THERMAL entry Jagan Teki
[U-Boot] [PATCH 4/5] Kconfig: Add DEFAULT_FDT_FILE entry Jagan Teki
[U-Boot] [PATCH 5/5] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support Jagan Teki
[U-Boot] [PATCH] imx: s/docs\/README.imximage/doc\/README.imximage/g Jagan Teki
[U-Boot] [PATCH 21/21] arm: imx: add i.MX6ULL 14x14 EVK board support Jagan Teki
[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller Jagan Teki
[U-Boot] [PATCH 21/21] arm: imx: add i.MX6ULL 14x14 EVK board support Jagan Teki
[U-Boot] [PATCH v2 00/17] imx6: Add Engicam i.CoreM6 QDL modules support Jagan Teki
[U-Boot] [PATCH v2 01/17] imx: iomux-v3: Fix build error with snvs base Jagan Teki
[U-Boot] [PATCH v2 02/17] serial: Kconfig: Add MXC_UART entry Jagan Teki
[U-Boot] [PATCH v2 03/17] thermal: Kconfig: Add IMX_THERMAL entry Jagan Teki
[U-Boot] [PATCH v2 04/17] Kconfig: Add DEFAULT_FDT_FILE entry Jagan Teki
[U-Boot] [PATCH v2 05/17] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support Jagan Teki
[U-Boot] [PATCH v2 06/17] imx6: icorem6: Add ENET support Jagan Teki
[U-Boot] [PATCH v2 07/17] imx: s/docs\/README.imximage/doc\/README.imximage/g Jagan Teki
[U-Boot] [PATCH v2 08/17] arm: dts: Add devicetree for i.MX6DL Jagan Teki
[U-Boot] [PATCH v2 09/17] arm: dts: Add devicetree for i.MX6DQL Jagan Teki
[U-Boot] [PATCH v2 10/17] arm: dts: imx6dl: Add pinctrl defines Jagan Teki
[U-Boot] [PATCH v2 11/17] dt-bindings: clock: imx6qdl: Add clock defines Jagan Teki
[U-Boot] [PATCH v2 12/17] arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo Jagan Teki
[U-Boot] [PATCH v2 13/17] imx6q: icorem6: Enable pinctrl driver Jagan Teki
[U-Boot] [PATCH v2 14/17] engicam: icorem6: Add DM_GPIO, DM_MMC support Jagan Teki
[U-Boot] [PATCH v2 15/17] arm: dts: Add devicetree for i.MX6Q Jagan Teki
[U-Boot] [PATCH v2 16/17] arm: dts: imx6q: Add pinctrl defines Jagan Teki
[U-Boot] [PATCH v2 17/17] arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual Jagan Teki
[U-Boot] [PATCH v2 01/17] imx: iomux-v3: Fix build error with snvs base Jagan Teki
[U-Boot] [PATCH v2 02/17] serial: Kconfig: Add MXC_UART entry Jagan Teki
[U-Boot] [PATCH v2 14/17] engicam: icorem6: Add DM_GPIO, DM_MMC support Jagan Teki
[U-Boot] [PATCH v2 05/17] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support Jagan Teki
[U-Boot] [PATCH v2 15/17] arm: dts: Add devicetree for i.MX6Q Jagan Teki
[U-Boot] [PATCH v4 0/7] spi/sf: Code removal/update Jagan Teki
[U-Boot] [PATCH v4 1/7] sf: Simplify fastest read cmd code Jagan Teki
[U-Boot] [PATCH v4 2/7] sf: Remove e_rd_cmd from param table Jagan Teki
[U-Boot] [PATCH v4 3/7] spi: Use mode for rx mode flags Jagan Teki
[U-Boot] [PATCH v4 4/7] spi: Remove SPI_RX_FAST Jagan Teki
[U-Boot] [PATCH v4 5/7] sf: Remove SECT_32K Jagan Teki
[U-Boot] [PATCH v4 6/7] sf: Add CONFIG_SPI_FLASH_USE_4K_SECTORS in spi_flash Jagan Teki
[U-Boot] [PATCH v4 7/7] sf: Move flags macro's to spi_flash_params{} members Jagan Teki
[U-Boot] [PATCH 02/15] spi: Add driver for Marvell Armada 3700 SoC Jagan Teki
[U-Boot] [PATCH 09/15] arm64: mvebu: Armada 3700: Add SPI device tree nodes Jagan Teki
[U-Boot] [PATCH v10] dm: at91: Add driver model support for the spi driver Jagan Teki
[U-Boot] [PATCH v2 0/2] spi: ti_qspi: Increase write speed Jagan Teki
[U-Boot] [PATCH 1/2] spi: Kconfig: Move FSL_QSPI entry to non-dm place Jagan Teki
[U-Boot] [PATCH 2/2] configs: fsl: Move SPI/SPI-FLASH configs to defconfig Jagan Teki
[U-Boot] [PATCH 1/2] spi: Kconfig: Move FSL_QSPI entry to non-dm place Jagan Teki
[U-Boot] [PATCH 2/2] configs: fsl: Move SPI/SPI-FLASH configs to defconfig Jagan Teki
[U-Boot] [PATCH v4 0/7] spi/sf: Code removal/update Jagan Teki
[U-Boot] Pull request: u-boot-spi/master Jagan Teki
[U-Boot] [PATCH v3 00/16] imx6: Add Engicam i.CoreM6 QDL support Jagan Teki
[U-Boot] [PATCH v3 01/16] serial: Kconfig: Add MXC_UART entry Jagan Teki
[U-Boot] [PATCH v3 02/16] thermal: Kconfig: Add IMX_THERMAL entry Jagan Teki
[U-Boot] [PATCH v3 03/16] Kconfig: Add DEFAULT_FDT_FILE entry Jagan Teki
[U-Boot] [PATCH v3 04/16] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support Jagan Teki
[U-Boot] [PATCH v3 05/16] imx6: icorem6: Add ENET support Jagan Teki
[U-Boot] [PATCH v3 06/16] imx: s/docs\/README.imximage/doc\/README.imximage/g Jagan Teki
[U-Boot] [PATCH v3 07/16] arm: dts: Add devicetree for i.MX6DL Jagan Teki
[U-Boot] [PATCH v3 08/16] arm: dts: Add devicetree for i.MX6DQL Jagan Teki
[U-Boot] [PATCH v3 09/16] arm: dts: imx6dl: Add pinctrl defines Jagan Teki
[U-Boot] [PATCH v3 10/16] dt-bindings: clock: imx6qdl: Add clock defines Jagan Teki
[U-Boot] [PATCH v3 11/16] arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo Jagan Teki
[U-Boot] [PATCH v3 12/16] imx6q: icorem6: Enable pinctrl driver Jagan Teki
[U-Boot] [PATCH v3 13/16] engicam: icorem6: Add DM_GPIO, DM_MMC support Jagan Teki
[U-Boot] [PATCH v3 14/16] arm: dts: Add devicetree for i.MX6Q Jagan Teki
[U-Boot] [PATCH v3 15/16] arm: dts: imx6q: Add pinctrl defines Jagan Teki
[U-Boot] [PATCH v3 16/16] arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual Jagan Teki
[U-Boot] [PATCH 09/15 v2] arm64: mvebu: Armada 3700: Add SPI device tree nodes Jagan Teki
[U-Boot] [PATCH 02/15 v2] spi: Add driver for Marvell Armada 3700 SoC Jagan Teki
[U-Boot] [PATCH v3 00/16] imx6: Add Engicam i.CoreM6 QDL support Jagan Teki
[U-Boot] [PATCH 02/15 v2] spi: Add driver for Marvell Armada 3700 SoC Jagan Teki
[U-Boot] [PATCH 02/15 v3] spi: Add driver for Marvell Armada 3700 SoC Jagan Teki
[U-Boot] [PATCH] net: fec_mxc: Convert into driver model Jagan Teki
[U-Boot] [PATCH v4 00/17] imx6: Add Engicam i.CoreM6 QDL support Jagan Teki
[U-Boot] [PATCH v4 01/17] serial: Kconfig: Add MXC_UART entry Jagan Teki
[U-Boot] [PATCH v4 02/17] thermal: Kconfig: Add IMX_THERMAL entry Jagan Teki
[U-Boot] [PATCH v4 03/17] Kconfig: Add DEFAULT_FDT_FILE entry Jagan Teki
[U-Boot] [PATCH v4 04/17] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support Jagan Teki
[U-Boot] [PATCH v4 05/17] net: Kconfig: Add FEC_MXC entry Jagan Teki
[U-Boot] [PATCH v4 06/17] imx6: icorem6: Add ENET support Jagan Teki
[U-Boot] [PATCH v4 07/17] imx: s/docs\/README.imximage/doc\/README.imximage/g Jagan Teki
[U-Boot] [PATCH v4 08/17] arm: dts: Add devicetree for i.MX6DL Jagan Teki
[U-Boot] [PATCH v4 09/17] arm: dts: Add devicetree for i.MX6DQL Jagan Teki
[U-Boot] [PATCH v4 10/17] arm: dts: imx6dl: Add pinctrl defines Jagan Teki
[U-Boot] [PATCH v4 11/17] dt-bindings: clock: imx6qdl: Add clock defines Jagan Teki
[U-Boot] [PATCH v4 12/17] arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo Jagan Teki
[U-Boot] [PATCH v4 13/17] imx6q: icorem6: Enable pinctrl driver Jagan Teki
[U-Boot] [PATCH v4 14/17] engicam: icorem6: Add DM_GPIO, DM_MMC support Jagan Teki
[U-Boot] [PATCH v4 15/17] arm: dts: Add devicetree for i.MX6Q Jagan Teki
[U-Boot] [PATCH v4 16/17] arm: dts: imx6q: Add pinctrl defines Jagan Teki
[U-Boot] [PATCH v4 17/17] arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual Jagan Teki
[U-Boot] [PATCH v4 00/17] sf:Updates on flash detection Jagan Teki
[U-Boot] [PATCH v4 01/17] sf: Adopt flash table INFO macro from Linux Jagan Teki
[U-Boot] [PATCH v4 02/17] sf: Simplify lock ops detection code Jagan Teki
[U-Boot] [PATCH v4 03/17] sf: sandbox: Use JEDEC_MFR|ID in id exctract Jagan Teki
[U-Boot] [PATCH v4 04/17] sf: Cleanup spi_flash_info{} Jagan Teki
[U-Boot] [PATCH v4 05/17] sf: Cleanup sf_params Jagan Teki
[U-Boot] [PATCH v4 06/17] sf: nr_sectors -> n_sectors Jagan Teki
[U-Boot] [PATCH v4 07/17] sf: Add SPI_FLASH_MAX_ID_LEN Jagan Teki
[U-Boot] [PATCH v4 08/17] sf: Increase max id length by 1 byte Jagan Teki
[U-Boot] [PATCH v4 09/17] sf: Add INFO6 flash_info macro Jagan Teki
[U-Boot] [PATCH v4 10/17] sf: params: Add S25FS256S_64K spi flash support Jagan Teki
[U-Boot] [PATCH v4 11/17] sf: Remove legacy idcode detection code Jagan Teki
[U-Boot] [PATCH v4 12/17] sf: Remove non-meaningful comments Jagan Teki
[U-Boot] [PATCH v4 13/17] sf: Rename sf_params.c to spi_flash_ids Jagan Teki
[U-Boot] [PATCH v4 14/17] sf: ids: Use small letter's with flash name Jagan Teki
[U-Boot] [PATCH v4 15/17] sf: ids: Use small letter in ext_jedec Jagan Teki
[U-Boot] [PATCH v4 16/17] sf: Rename few local functions Jagan Teki
[U-Boot] [PATCH v4 17/17] spi: Remove dual flash code Jagan Teki
[U-Boot] [PATCH v4 00/17] imx6: Add Engicam i.CoreM6 QDL support Jagan Teki
[U-Boot] [PATCH v2] net: fec_mxc: Convert into driver model Jagan Teki
[U-Boot] i.MX6: NAND boot with SPL Jagan Teki
[U-Boot] i.MX6: NAND boot with SPL Jagan Teki
[U-Boot] i.MX6: NAND boot with SPL Jagan Teki
[U-Boot] [PATCH] i.MX6 nand bootupdate, reworked Jagan Teki
[U-Boot] [PATCH] i.MX6 nand bootupdate, reworked Jagan Teki
[U-Boot] [PATCH v5 00/21] imx6: Add Engicam i.CoreM6 QDL support Jagan Teki
[U-Boot] [PATCH v5 01/21] serial: Kconfig: Add MXC_UART entry Jagan Teki
[U-Boot] [PATCH v5 02/21] thermal: Kconfig: Add IMX_THERMAL entry Jagan Teki
[U-Boot] [PATCH v5 03/21] Kconfig: Add DEFAULT_FDT_FILE entry Jagan Teki
[U-Boot] [PATCH v5 04/21] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support Jagan Teki
[U-Boot] [PATCH v5 05/21] net: Kconfig: Add FEC_MXC entry Jagan Teki
[U-Boot] [PATCH v5 06/21] imx6: icorem6: Add ENET support Jagan Teki
[U-Boot] [PATCH v5 07/21] imx: s/docs\/README.imximage/doc\/README.imximage/g Jagan Teki
[U-Boot] [PATCH v5 08/21] arm: dts: Add devicetree for i.MX6DL Jagan Teki
[U-Boot] [PATCH v5 09/21] arm: dts: Add devicetree for i.MX6DQL Jagan Teki
[U-Boot] [PATCH v5 10/21] arm: dts: imx6dl: Add pinctrl defines Jagan Teki
[U-Boot] [PATCH v5 11/21] dt-bindings: clock: imx6qdl: Add clock defines Jagan Teki
[U-Boot] [PATCH v5 12/21] arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo Jagan Teki
[U-Boot] [PATCH v5 13/21] imx6q: icorem6: Enable pinctrl driver Jagan Teki
[U-Boot] [PATCH v5 14/21] engicam: icorem6: Add DM_GPIO, DM_MMC support Jagan Teki
[U-Boot] [PATCH v5 15/21] arm: dts: Add devicetree for i.MX6Q Jagan Teki
[U-Boot] [PATCH v5 16/21] arm: dts: imx6q: Add pinctrl defines Jagan Teki
[U-Boot] [PATCH v5 17/21] arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual Jagan Teki
[U-Boot] [PATCH v5 18/21] mtd: nand: Kconfig: Add NAND_MXS entry Jagan Teki
[U-Boot] [PATCH v5 19/21] imx6: icorem6: Add NAND support Jagan Teki
[U-Boot] [PATCH v5 20/21] imx6: icorem6: Enable MTD device support Jagan Teki
[U-Boot] [PATCH v5 21/21] imx6: icorem6: Add default mtd nand partition table Jagan Teki
[U-Boot] [PATCH] i.MX6 nand bootupdate, reworked Jagan Teki
[U-Boot] [PATCH v5 06/21] imx6: icorem6: Add ENET support Jagan Teki
[U-Boot] [PATCH v5 06/21] imx6: icorem6: Add ENET support Jagan Teki
[U-Boot] [PATCH v5 06/21] imx6: icorem6: Add ENET support Jagan Teki
[U-Boot] imx7 u-boot nand update from u-boot Jagan Teki
[U-Boot] [PATCH] dm: ehci-mx6: support driver model Jagan Teki
[U-Boot] [PATCH v5 00/21] imx6: Add Engicam i.CoreM6 QDL support Jagan Teki
[U-Boot] [PATCH] sunxi: Fix H3 DRAM impedance calibration on rev. A chips Jagan Teki
[U-Boot] [PATCH] sunxi: Fix H3 DRAM impedance calibration on rev. A chips Jagan Teki
[U-Boot] [PATCH] sunxi: Fix H3 DRAM impedance calibration on rev. A chips Jagan Teki
[U-Boot] [PATCH 0/6] sunxi: sun5/7i: add the psci suspend function Antoine Tenart
[U-Boot] [PATCH 1/6] ARM: add the ARM_GIC configuration option Antoine Tenart
[U-Boot] [PATCH 2/6] sunxi: select ARM_GIC for sun[6789]i Antoine Tenart
[U-Boot] [PATCH 3/6] ARM: PSCI: protect GIC specific code with ARM_GIC Antoine Tenart
[U-Boot] [PATCH 4/6] sun5/7i: add an implementation of the psci suspend function Antoine Tenart
[U-Boot] [PATCH 5/6] sun5i: enable PSCI Antoine Tenart
[U-Boot] [PATCH 6/6] sun5i: boot in HYP mode by default Antoine Tenart
[U-Boot] [PATCH 3/6] ARM: PSCI: protect GIC specific code with ARM_GIC Antoine Tenart
[U-Boot] [PATCH 6/6] sun5i: boot in HYP mode by default Antoine Tenart
[U-Boot] [PATCH 2/2] fs/fat: Optimizes memory size with single global variable instead of 3 Benoît Thébaudeau
[U-Boot] [PATCH 1/4] fs/fat: Remove two statements without effect Benoît Thébaudeau
[U-Boot] [PATCH] usb: gadget: ci_udc: fix suspend/resume of USB Mass Storage John Tobias
[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL Michael Trimarchi
[U-Boot] [PATCH] sunxi: Fix H3 EMAC syscon register address Chen-Yu Tsai
[U-Boot] [PATCH] sunxi: musb: Power off OTG port VBUS when disabled Chen-Yu Tsai
[U-Boot] [PATCH 1/3] sunxi: Add mmc0 card detect pin for Sinlinx SinA33 Chen-Yu Tsai
[U-Boot] [PATCH 2/3] sunxi: Enable USB host support for Sinlinx SinA33 Chen-Yu Tsai
[U-Boot] [PATCH 3/3] sunxi: Enable USB gadget support for Sinlinx SinA33 Chen-Yu Tsai
[U-Boot] [PATCH] A20-OLinuXino-Lime2: Enable USB gadget support Chen-Yu Tsai
[U-Boot] [RFC PATCH] ARM: create .secure_stack section only for PSCI Chen-Yu Tsai
[U-Boot] [PATCH] efi: console: Correctly report modes Emmanuel Vadot
[U-Boot] [PATCH] efi: console: Correctly report modes Emmanuel Vadot
[U-Boot] [PATCH v3 2/4] board: evb-rk3399: add api to support dwc3 gadget Marek Vasut
[U-Boot] [PATCH v4 2/4] board: evb-rk3399: add api to support dwc3 gadget Marek Vasut
[U-Boot] [PATCH v4 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
[U-Boot] [U-Boot-DM] FPGA driver over PCI bus Marek Vasut
[U-Boot] [U-Boot-DM] FPGA driver over PCI bus Marek Vasut
[U-Boot] [PATCH] treewide: compress lines for immediate return Marek Vasut
[U-Boot] [PATCH v3 2/4] board: evb-rk3399: add api to support dwc3 gadget Marek Vasut
[U-Boot] [PATCH v4 2/4] board: evb-rk3399: add api to support dwc3 gadget Marek Vasut
[U-Boot] [PATCH] treewide: compress lines for immediate return Marek Vasut
[U-Boot] [PATCH] treewide: compress lines for immediate return Marek Vasut
[U-Boot] [PATCH v2 0/4] Migrate Vybrid USB driver to driver model Marek Vasut
[U-Boot] [PATCH 01/11] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Marek Vasut
[U-Boot] [PATCH 02/11] arm: socfpga: rstmgr: Add Reset Manager for Stratix 10 Marek Vasut
[U-Boot] [PATCH 03/11] arm: socfpga: rstmgr: Segregate the Reset Manager for Stratix 10 Marek Vasut
[U-Boot] [PATCH 04/11] arm: socfpga: clkmgr: Segregate the Clock Manager for Stratix 10 Marek Vasut
[U-Boot] [PATCH 05/11] arm: socfpga: fpgamgr: Segregate the FPGA Manager for Stratix 10 Marek Vasut
[U-Boot] [PATCH 06/11] arm: socfpga: misc: Segregate the misc.c for Stratix 10 Marek Vasut
[U-Boot] [PATCH 07/11] arm: socfpga: sysmgr: Fix casting warning when enabling ARM64 Marek Vasut
[U-Boot] [PATCH 09/11] arm: socfpga: stratix10: Add board folder for Stratix 10 socdk Marek Vasut
[U-Boot] [PATCH 10/11] arm: dts: socfpga: Add dts for Stratix 10 socdk Marek Vasut
[U-Boot] [PATCH 11/11] arm: socfpga: Add support for Stratix 10 SoC dev kit Marek Vasut
[U-Boot] [PATCH 04/11] arm: socfpga: clkmgr: Segregate the Clock Manager for Stratix 10 Marek Vasut
[U-Boot] [PATCH 06/11] arm: socfpga: misc: Segregate the misc.c for Stratix 10 Marek Vasut
[U-Boot] [PATCH 07/11] arm: socfpga: sysmgr: Fix casting warning when enabling ARM64 Marek Vasut
[U-Boot] [PATCH 11/11] arm: socfpga: Add support for Stratix 10 SoC dev kit Marek Vasut
[U-Boot] [PATCH] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Marek Vasut
[U-Boot] [PATCH 07/11] arm: socfpga: sysmgr: Fix casting warning when enabling ARM64 Marek Vasut
[U-Boot] [PATCH 11/11] arm: socfpga: Add support for Stratix 10 SoC dev kit Marek Vasut
[U-Boot] [PATCH 04/11] arm: socfpga: clkmgr: Segregate the Clock Manager for Stratix 10 Marek Vasut
[U-Boot] [PATCH 06/11] arm: socfpga: misc: Segregate the misc.c for Stratix 10 Marek Vasut
[U-Boot] [PATCH 2/2] input: specify the default of I8042_KEYB in more correct manner Marek Vasut
[U-Boot] [PATCH 1/9] MIPS: Add arch-wide arch_cpu_init Marek Vasut
[U-Boot] [PATCH 8/9] MIPS: L2 cache support Marek Vasut
[U-Boot] [PATCH 8/9] MIPS: L2 cache support Marek Vasut
[U-Boot] [PATCH 1/9] MIPS: Add arch-wide arch_cpu_init Marek Vasut
[U-Boot] [PATCH 1/9] MIPS: Add arch-wide arch_cpu_init Marek Vasut
[U-Boot] EHCI timed out on TD - token=0x80008d80 Marek Vasut
[U-Boot] [PATCH] Revert "net: asix: Fix AX88772B when used with DriverModel" Marek Vasut
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Marek Vasut
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Marek Vasut
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Marek Vasut
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Marek Vasut
[U-Boot] [PATCH] colibri_t30: fix usb ethernet functionality Marek Vasut
[U-Boot] [PATCH v2] net: asix: Fix ASIX 88772B with driver model Marek Vasut
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Marek Vasut
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Marek Vasut
[U-Boot] [PATCH] colibri_t30: fix usb ethernet functionality Marek Vasut
[U-Boot] [PATCH v3] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree Marek Vasut
[U-Boot] [PATCH v3] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH v2] apalis_t30: colibri_imx7: colibri_t30: fix ethernet functionality Marek Vasut
[U-Boot] [PATCH v3] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree Marek Vasut
[U-Boot] [PATCH v3] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH 05/15] usb: xhci: Add Marvell MVEBU xHCI support Marek Vasut
[U-Boot] [PATCH 06/15] usb: ehci: ehci-marvell.c: Add Armada 3700 support (ARMv8) Marek Vasut
[U-Boot] [PATCH 1/2] usb: fsl: Rename fdt_fixup_dr_usb Marek Vasut
[U-Boot] [PATCH] Revert "image-fit: switch ENOLINK to ENOENT" Marek Vasut
[U-Boot] [PATCH] Repair image-fit: switch ENOLINK to ENOENT Marek Vasut
[U-Boot] [PATCH 1/9] ddr: altera: Configuring SDRAM extra cycles timing parameters Marek Vasut
[U-Boot] [PATCH 2/9] arm: socfpga: Adding handoff for SDRAM ctrlcfg.extratime1 Marek Vasut
[U-Boot] [PATCH 3/9] arm: socfpga: mcvevk: Adding handoff for SDRAM ctrlcfg.extratime1 Marek Vasut
[U-Boot] [PATCH 4/9] arm: socfpga: socrates: Adding handoff for SDRAM ctrlcfg.extratime1 Marek Vasut
[U-Boot] [PATCH 2/9] arm: socfpga: Adding handoff for SDRAM ctrlcfg.extratime1 Marek Vasut
[U-Boot] [PATCH 1/9] ddr: altera: Configuring SDRAM extra cycles timing parameters Marek Vasut
[U-Boot] [PATCH 1/9] ddr: altera: Configuring SDRAM extra cycles timing parameters Marek Vasut
[U-Boot] [PATCH] Repair image-fit: switch ENOLINK to ENOENT Marek Vasut
[U-Boot] [PATCH 2/9] arm: socfpga: Adding handoff for SDRAM ctrlcfg.extratime1 Marek Vasut
[U-Boot] [PATCH] WIP: usb: xhci-pci: Add DM support Marek Vasut
[U-Boot] [PATCH 1/9] ddr: altera: Configuring SDRAM extra cycles timing parameters Marek Vasut
[U-Boot] [PATCH 2/9] arm: socfpga: Adding handoff for SDRAM ctrlcfg.extratime1 Marek Vasut
[U-Boot] [PATCH v2] ddr: altera: Configuring SDRAM extra cycles timing parameters Marek Vasut
[U-Boot] [PATCH 1/2] usb: host: add Kconfig for USB_XHCI_ROCKCHIP Marek Vasut
[U-Boot] [PATCH v2] ddr: altera: Configuring SDRAM extra cycles timing parameters Marek Vasut
[U-Boot] [PATCH] doc: socfpga: Update README.socfpga for Preloader development flow Marek Vasut
[U-Boot] [PATCH] image-fit: Fix fit_get_node_from_config semantics Marek Vasut
[U-Boot] [PATCH v3 1/9] ddr: altera: Configuring SDRAM extra cycles timing parameters Marek Vasut
[U-Boot] [PATCH v3 9/9] arm: socfpga: sockit: Adding handoff for SDRAM ctrlcfg.extratime1 Marek Vasut
[U-Boot] [PATCH 2/2] usb: fsl: Renaming fdt_fixup_erratum and fdt_fixup_usb_erratum Marek Vasut
[U-Boot] [PATCH v4] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH RESEND] phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID Marek Vasut
[U-Boot] [PATCH v4] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PATCH RESEND] phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID Marek Vasut
[U-Boot] [PATCH RESEND] phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID Marek Vasut
[U-Boot] [PATCH] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc Marek Vasut
[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller Armando Visconti
[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller Armando Visconti
[U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL Fabian Vogt
[U-Boot] [PATCH 1/9] gpio: bcm2835: add device tree support Fabian Vogt
[U-Boot] [PATCH 2/9] serial: bcm283x_mu: add device tree support Fabian Vogt
[U-Boot] [PATCH 3/9] serial: pl01x: expose skip_init platdata option in DT Fabian Vogt
[U-Boot] [PATCH 4/9] fdt: add dt-bindings for bcm2835 Fabian Vogt
[U-Boot] [PATCH 5/9] fdt: import bcm283x device tree sources from the linux kernel tree Fabian Vogt
[U-Boot] [PATCH 6/9] fdt: adjust bcm283x device tree for u-boot Fabian Vogt
[U-Boot] [PATCH 7/9] serial: bcm283x_mu: support disabling after initialization Fabian Vogt
[U-Boot] [PATCH 8/9] board: rpi: move uart deactivation to board_init Fabian Vogt
[U-Boot] [PATCH 9/9] ARM: bcm283x: use OF_CONTROL for bcm283x Fabian Vogt
[U-Boot] [PATCH v2 0/7] Adds support for secure boot on Keystone SoCs (K2E) Lokesh Vutla
[U-Boot] [PATCH] board: am57xx: Fix missing check for beagle_x15 Lokesh Vutla
[U-Boot] [PATCH V2] board: am57xx: Fix missing check for beagle_x15 Lokesh Vutla
[U-Boot] [PATCH v2 0/7] Adds support for secure boot on Keystone SoCs (K2E) Lokesh Vutla
[U-Boot] [PATCH] board: ks2: README: Update to add K2G support Lokesh Vutla
[U-Boot] [PATCH] keystone2: k2g: add env script to load firmware initramfs as part of boot flow Lokesh Vutla
[U-Boot] [PATCH 0/2] ARM: keystone2: Add support for parsing monitor header Lokesh Vutla
[U-Boot] [PATCH 1/2] ARM: keystone2: Add support for parsing monitor header Lokesh Vutla
[U-Boot] [PATCH 2/2] ti_armv7_keystone2: Update addr_mon variable Lokesh Vutla
[U-Boot] [PATCH 1/3] ARM: keystone: remove declaration of unused functions Lokesh Vutla
[U-Boot] [PATCH 2/3] ARM: keystone: rename clk_get_rate() to ks_clk_get_rate() Lokesh Vutla
[U-Boot] [PATCH] arm: dra7xx: Move fastboot options to defconfig Lokesh Vutla
[U-Boot] [PATCH] doc: typo fix addess -> address Jelle van der Waa
[U-Boot] [PATCH v4 3/4] ext4: fix endianess problems in ext4 write support Michael Walle
[U-Boot] [PATCH v6 0/2] armv8: Support loading 32-bit OS in AArch32 execution state Alison Wang
[U-Boot] [PATCH v6 1/2] armv8: Support loading 32-bit OS in AArch32 execution state Alison Wang
[U-Boot] [PATCH v6 2/2] armv8: fsl-layerscape: SMP support for loading 32-bit OS Alison Wang
[U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one Alison Wang
[U-Boot] [PATCH] arm: ls102xa: Remove reduplicate definition for Generic Timer frequency Alison Wang
[U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel Huan Wang
[U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel Huan Wang
[U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel Huan Wang
[U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works Stephen Warren
[U-Boot] ARM: tegra: jetson-tk1: Increase console buffer size Stephen Warren
[U-Boot] [PATCH] treewide: compress lines for immediate return Stephen Warren
[U-Boot] [PATCH v1 2/2] clk: at91: Add .ops callback for clk_generic Stephen Warren
[U-Boot] [PATCH] treewide: compress lines for immediate return Stephen Warren
[U-Boot] [PATCHv5 1/4] Revert "tegra: Add support for setting up a as3722 PMIC" Stephen Warren
[U-Boot] [PATCHv5 2/4] power: as3722: Allow using on any i2c bus with any address Stephen Warren
[U-Boot] [PATCHv5 3/4] ARM: tegra124: Add an option to disable CoreSight Stephen Warren
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Stephen Warren
[U-Boot] [PATCH v3 2/8] video: squash lines for immediate return Stephen Warren
[U-Boot] [PATCH v3 3/8] usb: replace ehci_*_remove() with usb_deregister() Stephen Warren
[U-Boot] [PATCHv5 1/4] Revert "tegra: Add support for setting up a as3722 PMIC" Stephen Warren
[U-Boot] [PATCHv5 3/4] ARM: tegra124: Add an option to disable CoreSight Stephen Warren
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Stephen Warren
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Stephen Warren
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Stephen Warren
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Stephen Warren
[U-Boot] config USB_STORAGE: defconfig vs include header Stephen Warren
[U-Boot] config USB_STORAGE: defconfig vs include header Stephen Warren
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Stephen Warren
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Stephen Warren
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Stephen Warren
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Stephen Warren
[U-Boot] [PATCH v7 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Stephen Warren
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Stephen Warren
[U-Boot] [PATCHv5 1/4] Revert "tegra: Add support for setting up a as3722 PMIC" Stephen Warren
[U-Boot] [PATCH 1/2] dt: net: add DWC EQoS binding Stephen Warren
[U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device Stephen Warren
[U-Boot] [PATCH 1/4] ARM: tegra: add SoC-level hook for board_late_init() Stephen Warren
[U-Boot] [PATCH 2/4] ARM: tegra: configure Ethernet address on Tegra186 Stephen Warren
[U-Boot] [PATCH 3/4] ARM: tegra: add DWC EQoS (ethernet) to Tegra186 DT Stephen Warren
[U-Boot] [PATCH 4/4] ARM: tegra: enable Ethernet on p2771-0000 Stephen Warren
[U-Boot] [PATCH v1 0/5] various fixes mainly for colibri_t20 Stephen Warren
[U-Boot] [PATCH v1 1/5] tegra: usb gadget: fix ci udc operation if not hostpc capable Stephen Warren
[U-Boot] [PATCH v1 3/5] colibri_t20: fix display configuration Stephen Warren
[U-Boot] [PATCH v1 4/5] colibri_t20: fix usb operation and controller order Stephen Warren
[U-Boot] [PATCH v1 5/5] colibri_t20: enable dfu also for nand Stephen Warren
[U-Boot] [PATCHv5 1/4] Revert "tegra: Add support for setting up a as3722 PMIC" Stephen Warren
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Stephen Warren
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Stephen Warren
[U-Boot] [PATCH 1/3] test/fs: Restructure file path specification to allow some flexibility Stephen Warren
[U-Boot] [PATCH 2/3] test/fs: Check ext4 behaviour if dirent is first entry in directory block Stephen Warren
[U-Boot] [PATCH 3/3] test/fs: Check writes using "." (same dir) relative path Stephen Warren
[U-Boot] [PATCH 1/4] fs/fat: Remove two statements without effect Stephen Warren
[U-Boot] [PATCH 01/21] ARM: tegra: fdt: Add 'non-removable' property to all eMMC nodes Stephen Warren
[U-Boot] [PATCH 02/21] mmc: tegra: use correct alias for SDHCI/MMC nodes Stephen Warren
[U-Boot] [PATCH 03/21] mmc: tegra: move pad_init_mmc() into MMC driver Stephen Warren
[U-Boot] [PATCH 04/21] mmc: tegra: don't use periph_id in pad_init_mmc() Stephen Warren
[U-Boot] [PATCH 05/21] mmc: tegra: priv struct and naming cleanup Stephen Warren
[U-Boot] [PATCH 06/21] ARM: tegra: set MMC pin mux in board_init() Stephen Warren
[U-Boot] [PATCH 07/21] mmc: tegra: Add DM_MMC support to Tegra MMC driver Stephen Warren
[U-Boot] [PATCH 08/21] ARM: tegra: remove "0, " from DT unit addresses Stephen Warren
[U-Boot] [PATCH 09/21] ARM: tegra: pull Tegra20 SoC DT from Linux v4.7 Stephen Warren
[U-Boot] [PATCH 10/21] ARM: tegra: pull Tegra30 SoC DT from Linux v4.7 Stephen Warren
[U-Boot] [PATCH 11/21] ARM: tegra: pull Tegra114 SoC DT from Linux v4.7 Stephen Warren
[U-Boot] [PATCH 12/21] ARM: tegra: pull Tegra124 SoC DT from Linux v4.7 Stephen Warren
[U-Boot] [PATCH 13/21] ARM: tegra: pull Tegra210 SoC DT from Linux v4.7 Stephen Warren
[U-Boot] [PATCH 14/21] ARM: tegra: add peripheral clock init table Stephen Warren
[U-Boot] [PATCH 15/21] ARM: tegra: add APIs the clock uclass driver will need Stephen Warren
[U-Boot] [PATCH 16/21] misc: implement Tegra CAR core driver Stephen Warren
[U-Boot] [PATCH 17/21] reset: implement a driver for the Tegra CAR Stephen Warren
[U-Boot] [PATCH 18/21] clock: implement a driver for the Tegra CAR Stephen Warren
[U-Boot] [PATCH 19/21] ARM: tegra: enable standard clock/reset APIs everywhere Stephen Warren
[U-Boot] [PATCH 20/21] mmc: tegra: only use new clock/reset APIs Stephen Warren
[U-Boot] [PATCH 21/21] i2c: tegra: only use new clock/reset APIs Stephen Warren
[U-Boot] [PATCH 2/3] test/fs: Check ext4 behaviour if dirent is first entry in directory block Stephen Warren
[U-Boot] [PATCH 3/3] test/fs: Check writes using "." (same dir) relative path Stephen Warren
[U-Boot] [PATCH v1 1/7] clk: clk-uclass: Assign clk->dev before call .of_xlate Stephen Warren
[U-Boot] [PATCH v1 3/7] gpio: atmel_pio4: Remove unneccessary clock calling Stephen Warren
[U-Boot] [PATCH v9] dm: at91: Add driver model support for the spi driver Stephen Warren
[U-Boot] [PATCH v1 2/7] clk: at91: Improve the clock implementation Stephen Warren
[U-Boot] [PATCH v1 3/5] colibri_t20: fix display configuration Stephen Warren
[U-Boot] [PATCH v1 5/5] colibri_t20: enable dfu also for nand Stephen Warren
[U-Boot] [PATCH] test: add NFS download test Stephen Warren
[U-Boot] [PATCH v2 1/4] tegra: usb gadget: fix ci udc operation if not hostpc capable Stephen Warren
[U-Boot] [PATCH v2 3/4] colibri_t20: fix display configuration Stephen Warren
[U-Boot] [PATCH v2 4/4] colibri_t20: fix usb operation and controller order Stephen Warren
[U-Boot] [PATCH 1/3] ARM: tegra: fix USB ULPI PHY reset signal inversion confusion Stephen Warren
[U-Boot] [PATCH 2/3] ARM: tegra: fix USB controller aliases Stephen Warren
[U-Boot] [PATCH 3/3] ARM: tegra: fix ULPI PHY on Ventana and Seaboard Stephen Warren
[U-Boot] [PATCH] net: smsc95xx: fix DM MAC address reading Stephen Warren
[U-Boot] [PATCH v3 3/5] regulator: fixed: honour optionality of enable gpio Stephen Warren
[U-Boot] [PATCH v3 4/5] colibri_t20: fix display configuration Stephen Warren
[U-Boot] [PATCH v4 3/5] regulator: fixed: honour optionality of enable gpio Stephen Warren
[U-Boot] ad-hoc CONFIG build error Stephen Warren
[U-Boot] ad-hoc CONFIG build error Stephen Warren
[U-Boot] [PATCH 1/2] Makefile: use if_change_dep for u-boot.cfg Stephen Warren
[U-Boot] [PATCH 2/2] Makefile: rm u-boot.cfg dependencies are missing Stephen Warren
[U-Boot] [PATCH] test/py/tests/test_vboot.py: Add check that we boot the image Stephen Warren
[U-Boot] [PATCHv5 4/4] Add support the Avionic Design Meerkat COM and Kein Baseboard Stephen Warren
[U-Boot] [PATCH v1] ARM: at91/dt: sama5d2: Fix the warning from dtc Stephen Warren
[U-Boot] [PATCH v2] dm/mmc: gen_atmel_mci: Add driver model support for mci Stephen Warren
[U-Boot] [PATCH v2 2/7] clk: at91: Improve the clock implementation Stephen Warren
[U-Boot] [PATCH] net: smsc95xx: fix DM MAC address reading Stephen Warren
[U-Boot] [PATCH] ARM: tegra: fix clock_get_periph_rate() for UART clocks Stephen Warren
[U-Boot] [PATCH] ARM: tegra: flush caches via SMC call Stephen Warren
[U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device Stephen Warren
[U-Boot] U-Boot DFU test and Ctrl+C Stephen Warren
[U-Boot] U-Boot DFU test and Ctrl+C Stephen Warren
[U-Boot] [PATCH v2 2/6] apalis/colibri_t20/t30: deactivate displaying board info Stephen Warren
[U-Boot] [PATCH v2 5/6] apalis/colibri_t30: move environment location Stephen Warren
[U-Boot] Pull request, u-boot-tegra/master Tom Warren
[U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works Tom Warren
[U-Boot] ARM: tegra: jetson-tk1: Increase console buffer size Tom Warren
[U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works Tom Warren
[U-Boot] ARM: tegra: jetson-tk1: Increase console buffer size Tom Warren
[U-Boot] Pull request, u-boot-tegra/master Tom Warren
[U-Boot] [PATCH] getting ubifs to run Travis Waters
[U-Boot] [PATCH] getting ubifs to run Travis Waters
[U-Boot] [PATCH] fsl-ifc-nand : Corrected the programming of chip select Matt Weber
[U-Boot] [PATCH] fsl_ifc_nand: Added random output enable cmd Matt Weber
[U-Boot] [PATCH v2] fsl-ifc-nand : Corrected the programming of chip select Matt Weber
[U-Boot] [PATCH v3] fsl-ifc-nand : Corrected the programming of chip select Matt Weber
[U-Boot] tftp using ENC424J600 Edward Wingate
[U-Boot] [PATCH] nand: Fix some more NULL name tests Scott Wood
[U-Boot] Pull request: nand flash Scott Wood
[U-Boot] [PATCH] fsl-ifc-nand : Corrected the programming of chip select Scott Wood
[U-Boot] [PATCH] fsl-ifc-nand : Corrected the programming of chip select Scott Wood
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Scott Wood
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Scott Wood
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock Scott Wood
[U-Boot] [PATCH v3] fsl-ifc-nand : Corrected the programming of chip select Scott Wood
[U-Boot] [PATCH v2] at91: video: Support driver-model for the HLCD driver Songjun Wu
[U-Boot] [PATCH] rockchip: rk3288: sdram: fix DDR address range Ziyuan Xu
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode Ziyuan Xu
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode Ziyuan Xu
[U-Boot] [PATCH] rockchip: miniarm: remove eMMC support Ziyuan Xu
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Ziyuan Xu
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Ziyuan Xu
[U-Boot] [PATCH] mmc: dw_mmc: push/pop all FIFO data if any data request Ziyuan Xu
[U-Boot] [PATCH] mmc: dw_mmc: push/pop all FIFO data if any data request Ziyuan Xu
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode Ziyuan Xu
[U-Boot] [PATCH] rockchip: rk3288: sdram: fix DDR address range Ziyuan Xu
[U-Boot] [PATCH] treewide: compress lines for immediate return Masahiro Yamada
[U-Boot] [PATCH] treewide: compress lines for immediate return Masahiro Yamada
[U-Boot] [PATCH] treewide: compress lines for immediate return Masahiro Yamada
[U-Boot] [PATCH] treewide: compress lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Masahiro Yamada
[U-Boot] [PATCH v2 01/44] Correct defconfigs using savedefconfig Masahiro Yamada
[U-Boot] [PATCH v2 0/7] Clean-up: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v2 1/7] mmc: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v2 2/7] video: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v2 3/7] usb: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v2 4/7] x86: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v2 5/7] samsung: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v2 6/7] power: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v2 7/7] libfdt: simplify fdt_del_mem_rsv() Masahiro Yamada
[U-Boot] [PATCH v2 2/7] video: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Masahiro Yamada
[U-Boot] [PATCH v3 0/8] Clean-up: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v3 1/8] mmc: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v3 2/8] video: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v3 3/8] usb: replace ehci_*_remove() with usb_deregister() Masahiro Yamada
[U-Boot] [PATCH v3 4/8] usb: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v3 5/8] x86: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v3 6/8] libfdt: simplify fdt_del_mem_rsv() Masahiro Yamada
[U-Boot] [PATCH v3 7/8] arch, board: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v3 8/8] drivers: squash lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v2 3/4] ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig Masahiro Yamada
[U-Boot] [PATCH] treewide: compress lines for immediate return Masahiro Yamada
[U-Boot] [PATCH] treewide: compress lines for immediate return Masahiro Yamada
[U-Boot] [PATCH v2 01/44] Correct defconfigs using savedefconfig Masahiro Yamada
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Masahiro Yamada
[U-Boot] config USB_STORAGE: defconfig vs include header Masahiro Yamada
[U-Boot] [PATCH v2 01/44] Correct defconfigs using savedefconfig Masahiro Yamada
[U-Boot] [PATCH 1/2] sandbox, x86: select DM_KEYBOARD instead of default y entry Masahiro Yamada
[U-Boot] [PATCH 2/2] input: specify the default of I8042_KEYB in more correct manner Masahiro Yamada
[U-Boot] config USB_STORAGE: defconfig vs include header Masahiro Yamada
[U-Boot] [PATCH v7 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Masahiro Yamada
[U-Boot] [PATCH 2/2] configs: Migrate CONFIG_USB_STORAGE Masahiro Yamada
[U-Boot] [PATCH] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Masahiro Yamada
[U-Boot] [PATCH v7 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Masahiro Yamada
[U-Boot] [PATCH 1/3] treewide: rename CONFIG_SPL_SERIAL_SUPPORT to CONFIG_SPL_SERIAL Masahiro Yamada
[U-Boot] [PATCH 2/3] treewide: rename CONFIG_SPL_GPIO_SUPPORT to CONFIG_SPL_GPIO Masahiro Yamada
[U-Boot] [PATCH 3/3] treewide: rename CONFIG_SPL_I2C_SUPPORT to CONFIG_SPL_I2C Masahiro Yamada
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Masahiro Yamada
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Masahiro Yamada
[U-Boot] [PATCH] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Masahiro Yamada
[U-Boot] [PATCH v3 35/45] Remove CONFIG_SPL_PINCTRL_SUPPORT Masahiro Yamada
[U-Boot] [PATCH 00/12] ARM: uniphier: UniPhier SoC updates for v2016.11-rc1 Masahiro Yamada
[U-Boot] [PATCH 01/12] ARM: uniphier: sort select:s alphabetically Masahiro Yamada
[U-Boot] [PATCH 02/12] usb: uniphier: remove UniPhier xHCI driver and select DM_USB Masahiro Yamada
[U-Boot] [PATCH 03/12] ARM: uniphier: delete unnecessary xHCI pin-mux settings Masahiro Yamada
[U-Boot] [PATCH 04/12] ARM: uniphier: enable Generic EHCI driver for Pro4 SoC Masahiro Yamada
[U-Boot] [PATCH 05/12] mmc: uniphier-sd: migrate to CONFIG_BLK Masahiro Yamada
[U-Boot] [PATCH 06/12] pinctrl: uniphier: add System Bus pin-mux settings Masahiro Yamada
[U-Boot] [PATCH 07/12] pinctrl: uniphier: move register base macros from header to .c file Masahiro Yamada
[U-Boot] [PATCH 08/12] ARM: uniphier: remove IECTRL setup code of LD4 SoC Masahiro Yamada
[U-Boot] [PATCH 09/12] ARM: uniphier: use checkboard() instead of misc_init_f() Masahiro Yamada
[U-Boot] [PATCH 10/12] ARM: uniphier: merge board init functions into board_init() Masahiro Yamada
[U-Boot] [PATCH 11/12] ARM: uniphier: fix DRAM size of LD21 SoC package Masahiro Yamada
[U-Boot] [PATCH 12/12] ARM: uniphier: introduce flags to adjust DRAM timing for LD20/LD21 Masahiro Yamada
[U-Boot] [PATCH 1/2] configs: Resync with savedefconfig Masahiro Yamada
[U-Boot] [PATCH 00/12] ARM: uniphier: UniPhier SoC updates for v2016.11-rc1 Masahiro Yamada
[U-Boot] pull request: u-boot-uniphier/master Masahiro Yamada
[U-Boot] pull request: u-boot-uniphier/master Masahiro Yamada
[U-Boot] [PATCH] fixup! ARM: uniphier: fix DRAM size of LD21 SoC package Masahiro Yamada
[U-Boot] [PATCH v7 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Masahiro Yamada
[U-Boot] [PATCH] Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL" Masahiro Yamada
[U-Boot] [PATCH 00/15] ARM: uniphier: more updates for UniPhier SoC family for v2016.11-rc1 Masahiro Yamada
[U-Boot] [PATCH 01/15] pinctrl: uniphier: support 4bit-width pin-mux register capability Masahiro Yamada
[U-Boot] [PATCH 02/15] pinctrl: uniphier: add UniPhier sLD3 pinctrl driver Masahiro Yamada
[U-Boot] [PATCH 03/15] ARM: dts: uniphier: add pinctrl device node and pinctrl properties Masahiro Yamada
[U-Boot] [PATCH 04/15] ARM: uniphier: select PINCTRL and SPL_PINCTRL Masahiro Yamada
[U-Boot] [PATCH 05/15] ARM: uniphier: remove redundant pin-muxing for EA24 pin of sLD3 SoC Masahiro Yamada
[U-Boot] [PATCH 06/15] ARM: uniphier: remove ad-hoc pin-mux code for sLD3 Masahiro Yamada
[U-Boot] [PATCH 07/15] ARM: uniphier: consolidate NAND pin-mux settings Masahiro Yamada
[U-Boot] [PATCH 08/15] ARM: dts: uniphier: include System Bus pin group node in SPL DT Masahiro Yamada
[U-Boot] [PATCH 09/15] ARM: uniphier: consolidate System Bus pin-mux settings for LD11/LD20 Masahiro Yamada
[U-Boot] [PATCH 10/15] ARM: uniphier: move XIRQ pin-mux settings of LD11/LD20 Masahiro Yamada
[U-Boot] [PATCH 11/15] ARM: uniphier: rename CONFIG_DPLL_SSC_RATE_1PER Masahiro Yamada
[U-Boot] [PATCH 12/15] ARM: uniphier: move PLL init code to U-Boot proper where possible Masahiro Yamada
[U-Boot] [PATCH 13/15] ARM: uniphier: collect clock/PLL init code into a single directory Masahiro Yamada
[U-Boot] [PATCH 14/15] ARM: uniphier: add PLL init code for LD20 SoC Masahiro Yamada
[U-Boot] [PATCH 15/15] ARM: uniphier: update DRAM init code for LD20 SoC Masahiro Yamada
[U-Boot] [PATCH 00/15] ARM: uniphier: more updates for UniPhier SoC family for v2016.11-rc1 Masahiro Yamada
[U-Boot] pull request: u-boot-uniphier/master (2nd round) Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: move CONFIG_SPL_* to defconfig or select Masahiro Yamada
[U-Boot] [PATCH v2] Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL" Masahiro Yamada
[U-Boot] [PATCH 2/2] input: specify the default of I8042_KEYB in more correct manner Masahiro Yamada
[U-Boot] [PATCH v2] ARM: uniphier: move CONFIG_SPL_* to defconfig or select Masahiro Yamada
[U-Boot] [PATCH 0/8] Consolidate errno.h headers, improvements of rest and ehci-generic Masahiro Yamada
[U-Boot] [PATCH 1/8] treewide: replace #include <asm/errno.h> with <linux/errno.h> Masahiro Yamada
[U-Boot] [PATCH 2/8] Remove arch/${ARCH}/include/asm/errno.h Masahiro Yamada
[U-Boot] [PATCH 3/8] treewide: replace #include <asm-generic/errno.h> with <linux/errno.h> Masahiro Yamada
[U-Boot] [PATCH 4/8] Move error macros from <asm-generic/errno.h> to <linux/errno.h> Masahiro Yamada
[U-Boot] [PATCH 5/8] Move ENOTSUPP defines to include/linux/errno.h Masahiro Yamada
[U-Boot] [PATCH 6/8] errno.h: sync error macros with linux 4.8-rc7 Masahiro Yamada
[U-Boot] [PATCH 7/8] reset: add no-op stubs for optional reset control Masahiro Yamada
[U-Boot] [PATCH 8/8] usb: ehci-generic: support reset control for generic EHCI Masahiro Yamada
[U-Boot] [RESEND PATCH 00/10] Consolidate errno.h headers, improvements of rest and ehci-generic Masahiro Yamada
[U-Boot] [RESEND PATCH 01/10] treewide: use #include <...> to include public headers Masahiro Yamada
[U-Boot] [RESEND PATCH 02/10] Add <linux/errno.h> as a wrapper of <asm-generic/errno.h> Masahiro Yamada
[U-Boot] [RESEND PATCH 03/10] treewide: replace #include <asm/errno.h> with <linux/errno.h> Masahiro Yamada
[U-Boot] [RESEND PATCH 04/10] Remove arch/${ARCH}/include/asm/errno.h Masahiro Yamada
[U-Boot] [RESEND PATCH 05/10] treewide: replace #include <asm-generic/errno.h> with <linux/errno.h> Masahiro Yamada
[U-Boot] [RESEND PATCH 06/10] Move error macros from <asm-generic/errno.h> to <linux/errno.h> Masahiro Yamada
[U-Boot] [RESEND PATCH 07/10] Move ENOTSUPP defines to include/linux/errno.h Masahiro Yamada
[U-Boot] [RESEND PATCH 08/10] errno.h: sync error macros with linux 4.8-rc7 Masahiro Yamada
[U-Boot] [RESEND PATCH 09/10] reset: add no-op stubs for optional reset control Masahiro Yamada
[U-Boot] [RESEND PATCH 10/10] usb: ehci-generic: support reset control for generic EHCI Masahiro Yamada
[U-Boot] [PATCH v2 0/6] mmc: sdhci: some fixes for CONFIG_BLK migration and macro renaming Masahiro Yamada
[U-Boot] [RESEND PATCH 04/10] Remove arch/${ARCH}/include/asm/errno.h Masahiro Yamada
[U-Boot] [PATCH 0/5] ARM: uniphier: UniPhier updates (round 3) for v2016.11-rc1 Masahiro Yamada
[U-Boot] [PATCH 1/5] ARM: uniphier: add PLL init code for LD11 SoC Masahiro Yamada
[U-Boot] [PATCH 2/5] clk: uniphier: constify clock data arrays/structures Masahiro Yamada
[U-Boot] [PATCH 3/5] clk: uniphier: move U_BOOT_DRIVER entry to core code Masahiro Yamada
[U-Boot] [PATCH 4/5] clk: uniphier: allow to have clock node under syscon node Masahiro Yamada
[U-Boot] [PATCH 5/5] ARM: dts: uniphier: sync clock/reset controller nodes with Linux Masahiro Yamada
[U-Boot] [PATCH 0/2] config whitelist: tool update and sync Masahiro Yamada
[U-Boot] [PATCH 1/2] build-whitelist: do not add new options to whitelist when update Masahiro Yamada
[U-Boot] [PATCH 2/2] Sync config_whitelist.txt Masahiro Yamada
[U-Boot] [PATCH v2] ARM: uniphier: move CONFIG_SPL_* to defconfig or select Masahiro Yamada
[U-Boot] [PATCH 0/5] ARM: uniphier: UniPhier updates (round 3) for v2016.11-rc1 Masahiro Yamada
[U-Boot] pull request: u-boot-uniphier/master Masahiro Yamada
[U-Boot] [PATCH] ns16650: Make sure we have CONFIG_CLK set before using infrastructure Masahiro Yamada
[U-Boot] [PATCH 1/2] Makefile: use if_change_dep for u-boot.cfg Masahiro Yamada
[U-Boot] [PATCH v2 0/2] config whitelist: tool update and sync Masahiro Yamada
[U-Boot] [PATCH v2 1/2] build-whitelist: do not add new options to whitelist when update Masahiro Yamada
[U-Boot] [PATCH v2 2/2] Sync config_whitelist.txt Masahiro Yamada
[U-Boot] [PATCH v3 0/3] config whitelist: tool update and sync Masahiro Yamada
[U-Boot] [PATCH v3 1/3] build-whitelist: do not add new options to whitelist when update Masahiro Yamada
[U-Boot] [PATCH v3 2/3] config_whitelist: sync by tool Masahiro Yamada
[U-Boot] [PATCH v3 3/3] config_whitelist: remove bogus options Masahiro Yamada
[U-Boot] [PATCH 0/5] Refactor makefiles for u-boot.cfg rules Masahiro Yamada
[U-Boot] [PATCH 1/5] check-config: fix wrong comment about how to build whitelist Masahiro Yamada
[U-Boot] [PATCH 2/5] kbuild: move no_new_adhoc_configs_check to "all" target command Masahiro Yamada
[U-Boot] [PATCH 3/5] kbuild: make dependencies in scripts/Makefile.autoconf more readable Masahiro Yamada
[U-Boot] [PATCH 4/5] kbuild: generate u-boot.cfg as a byproduct of include/autoconf.mk Masahiro Yamada
[U-Boot] [PATCH 5/5] check-config: allow to complete build even with ad-hoc CONFIG options Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: do not setup pins for System Bus on NAND boot mode Masahiro Yamada
[U-Boot] [RFC PATCH] ARM: create .secure_stack section only for PSCI Masahiro Yamada
[U-Boot] [PATCH v2 2/4] ARM: armv7: guard memory reserve for PSCI with #ifdef CONFIG_ARMV7_PSCI Masahiro Yamada
[U-Boot] [PATCH 0/3] keystone, clk: revert ugly work-around by #ifdef CONFIG_CLK Masahiro Yamada
[U-Boot] [PATCH 1/3] ARM: keystone: remove declaration of unused functions Masahiro Yamada
[U-Boot] [PATCH 2/3] ARM: keystone: rename clk_get_rate() to ks_clk_get_rate() Masahiro Yamada
[U-Boot] [PATCH 3/3] Revert "ns16650: Make sure we have CONFIG_CLK set before using infrastructure" Masahiro Yamada
[U-Boot] [PATCH 1/5] check-config: fix wrong comment about how to build whitelist Masahiro Yamada
[U-Boot] [PATCH 5/5] check-config: allow to complete build even with ad-hoc CONFIG options Masahiro Yamada
[U-Boot] [PATCH 2/3] ARM: keystone: rename clk_get_rate() to ks_clk_get_rate() Masahiro Yamada
[U-Boot] [PATCH 5/5] check-config: allow to complete build even with ad-hoc CONFIG options Masahiro Yamada
[U-Boot] [RFC] Rearrange CONFIG_* macros Masahiro Yamada
[U-Boot] [PATCH v4 0/4] rk3399: enable dwc3 gadget and fastboot Kever Yang
[U-Boot] [PATCH v4 1/4] rk3399: add a empty "sys_proto.h" header file Kever Yang
[U-Boot] [PATCH v4 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
[U-Boot] [PATCH v4 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH v4 4/4] config: rk3399: add support for dwc3 gadget Kever Yang
[U-Boot] [PATCH v3 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
[U-Boot] [PATCH v3 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH v3 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
[U-Boot] [PATCH v4 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
[U-Boot] [PATCH v4 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH 1/7] rockchip: rk3399: update PPLL and pmu_pclk frequency Kever Yang
[U-Boot] [PATCH 3/7] power: regulator: add pwm regulator Kever Yang
[U-Boot] [PATCH 6/7] dts: evb-rk3399: add init voltage node for vdd-center Kever Yang
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Kever Yang
[U-Boot] [PATCH 1/2] rk3288: sdram: auto-detect the capacity Kever Yang
[U-Boot] [PATCH 2/2] dts: rk3288: remove node in dmc which not need anymore Kever Yang
[U-Boot] [PATCH v2 0/7] add pwm regulator driver Kever Yang
[U-Boot] [PATCH v2 1/7] rockchip: rk3399: update PPLL and pmu_pclk frequency Kever Yang
[U-Boot] [PATCH v2 2/7] rockchip: rkpwm: fix the register sequence Kever Yang
[U-Boot] [PATCH v2 3/7] power: regulator: add pwm regulator Kever Yang
[U-Boot] [PATCH v2 4/7] rockchip: evb_rk3399: init vdd_center regulator Kever Yang
[U-Boot] [PATCH v2 5/7] Kconfig: rockchip: enable DM_PWM and DM_REGULATOR Kever Yang
[U-Boot] [PATCH v2 6/7] dts: evb-rk3399: add init voltage node for vdd-center Kever Yang
[U-Boot] [PATCH v2 7/7] config: evb-rk3399: enable pwm regulator Kever Yang
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Kever Yang
[U-Boot] [PATCH v2 0/3] Add sdram capacity auto detect for rk3288 Kever Yang
[U-Boot] [PATCH v2 1/3] rk3288: config change for enable dram capacity auto-detect. Kever Yang
[U-Boot] [PATCH v2 2/3] rk3288: sdram: auto-detect the capacity Kever Yang
[U-Boot] [PATCH v2 3/3] dts: rk3288: remove node in dmc which not need anymore Kever Yang
[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288 Kever Yang
[U-Boot] [PATCH v2 0/3] Add sdram capacity auto detect for rk3288 Kever Yang
[U-Boot] [PATCH v2 1/3] rk3288: config change for enable dram capacity auto-detect. Kever Yang
[U-Boot] [PATCH 0/2] Kconfig USB_XHCI_ROCKCHIP fixup Kever Yang
[U-Boot] [PATCH 1/2] usb: host: add Kconfig for USB_XHCI_ROCKCHIP Kever Yang
[U-Boot] [PATCH 2/2] rk3399: move the USB_XHCI_ROCKCHIP into Kconfig Kever Yang
[U-Boot] [PATCH v2 1/3] rk3288: config change for enable dram capacity auto-detect. Kever Yang
[U-Boot] [PATCH v2 0/3] Add sdram capacity auto detect for rk3288 Kever Yang
[U-Boot] Rockchip patches for testing Kever Yang
[U-Boot] [PATCH v3 0/7] add pwm regulator driver Kever Yang
[U-Boot] [PATCH v3 1/7] rockchip: rk3399: update PPLL and pmu_pclk frequency Kever Yang
[U-Boot] [PATCH v3 2/7] rockchip: rkpwm: fix the register sequence Kever Yang
[U-Boot] [PATCH v3 3/7] power: regulator: add pwm regulator Kever Yang
[U-Boot] [PATCH v3 4/7] rockchip: evb_rk3399: init vdd_center regulator Kever Yang
[U-Boot] [PATCH v3 5/7] Kconfig: rockchip: enable DM_PWM and DM_REGULATOR Kever Yang
[U-Boot] [PATCH v3 6/7] dts: evb-rk3399: add init voltage node for vdd-center Kever Yang
[U-Boot] [PATCH v3 7/7] config: evb-rk3399: enable pwm regulator Kever Yang
[U-Boot] [PATCH v2] mmc: sdhci: Add the programmable clock mode support Kever Yang
[U-Boot] [PATCH v1 0/7] clk: at91: Improve the clock implementation Wenyou Yang
[U-Boot] [PATCH v1 1/7] clk: clk-uclass: Assign clk->dev before call .of_xlate Wenyou Yang
[U-Boot] [PATCH v1 2/7] clk: at91: Improve the clock implementation Wenyou Yang
[U-Boot] [PATCH v1 3/7] gpio: atmel_pio4: Remove unneccessary clock calling Wenyou Yang
[U-Boot] [PATCH v1 4/7] i2c: at91_i2c: Remove unneccessary clock calling Wenyou Yang
[U-Boot] [PATCH v1 5/7] i2c: at91_i2c: Change error return -ENODEV to -EINVAL Wenyou Yang
[U-Boot] [PATCH v1 6/7] usb: ehci-atmel: Remove unneccessary clock calling Wenyou Yang
[U-Boot] [PATCH v1 7/7] mmc: atmel_sdhci: Remove unneccessary clock calling Wenyou Yang
[U-Boot] [PATCH v9] dm: at91: Add driver model support for the spi driver Wenyou Yang
[U-Boot] [PATCH v2] clk: at91: Fix at91-pmc and at91-sckc's class ID Wenyou Yang
[U-Boot] [PATCH v2] mmc: mmc-uclass: Add mmc_init() in mmc preinit phrase Wenyou Yang
[U-Boot] [PATCH v2 0/2] serial: atmel_usart: Support to enable an early debug UART Wenyou Yang
[U-Boot] [PATCH v2 1/2] serial: Kconfig: Add ATMEL_USART option Wenyou Yang
[U-Boot] [PATCH v2 2/2] serial: atmel_usart: Support enable an early debug UART Wenyou Yang
[U-Boot] [PATCH v2] i2c: at91_i2c: Fix the wrong include file Wenyou Yang
[U-Boot] [PATCH v2 0/4] board: sama5d2_xplained: Convert to use device tree and drivers with DM Wenyou Yang
[U-Boot] [PATCH v2 1/4] board: sama5d2_xplained: Move config options to defconfigs Wenyou Yang
[U-Boot] [PATCH v2 2/4] board: sama5d2_xplained: Clean up code Wenyou Yang
[U-Boot] [PATCH v2 3/4] board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC Wenyou Yang
[U-Boot] [PATCH v2 4/4] board: sama5d2_xplained: Enable an early debug UART Wenyou Yang
[U-Boot] [PATCH v2] mmc: sdhci: Add the programmable clock mode support Wenyou Yang
[U-Boot] [PATCH v2 0/7] clk: at91: Improve the clock implementation Wenyou Yang
[U-Boot] [PATCH v2 1/7] clk: clk-uclass: Assign clk->dev before call .of_xlate Wenyou Yang
[U-Boot] [PATCH v2 2/7] clk: at91: Improve the clock implementation Wenyou Yang
[U-Boot] [PATCH v2 3/7] gpio: atmel_pio4: Remove unneccessary clock calling Wenyou Yang
[U-Boot] [PATCH v2 4/7] i2c: at91_i2c: Remove unneccessary clock calling Wenyou Yang
[U-Boot] [PATCH v2 5/7] i2c: at91_i2c: Change error return -ENODEV to -EINVAL Wenyou Yang
[U-Boot] [PATCH v2 6/7] usb: ehci-atmel: Remove unneccessary clock calling Wenyou Yang
[U-Boot] [PATCH v2 7/7] mmc: atmel_sdhci: Remove unneccessary clock calling Wenyou Yang
[U-Boot] [PATCH v10] dm: at91: Add driver model support for the spi driver Wenyou Yang
[U-Boot] [PATCH v1] ARM: at91/dt: sama5d2: Fix the warning from dtc Wenyou Yang
[U-Boot] [PATCH v1] ARM: dts: Makefile: Use board to decide to compile dts Wenyou Yang
[U-Boot] [PATCH v1] dm/mmc: gen_atmel_mci: Add driver model support for mci Wenyou Yang
[U-Boot] [PATCH v2] dm/mmc: gen_atmel_mci: Add driver model support for mci Wenyou Yang
[U-Boot] [PATCH v3 0/7] clk: at91: Improve the clock implementation Wenyou Yang
[U-Boot] [PATCH v3 1/7] clk: clk-uclass: Assign clk->dev before call .of_xlate Wenyou Yang
[U-Boot] [PATCH v3 2/7] clk: at91: Improve the clock implementation Wenyou Yang
[U-Boot] [PATCH v3 3/7] gpio: atmel_pio4: Remove unnecessary clock calling Wenyou Yang
[U-Boot] [PATCH v3 4/7] i2c: at91_i2c: Remove unnecessary clock calling Wenyou Yang
[U-Boot] [PATCH v3 5/7] i2c: at91_i2c: Change error return -ENODEV to -EINVAL Wenyou Yang
[U-Boot] [PATCH v3 6/7] usb: ehci-atmel: Remove unnecessary clock calling Wenyou Yang
[U-Boot] [PATCH v3 7/7] mmc: atmel_sdhci: Remove unnecessary clock calling Wenyou Yang
[U-Boot] [PATCH] armv7: ls102xa: add lowlevel init Xiaoliang Yang
[U-Boot] [PATCH] armv7: ls102xa: add lowlevel init Xiaoliang Yang
[U-Boot] [PATCH] armv7: LS1021a: enable i-cache in start.S Xiaoliang Yang
[U-Boot] [PATCH v1 0/4] sf: add ADDR_4B for 4byte address support Yuan Yao
[U-Boot] [PATCH v1 1/4] sf: add ADDR_4B for 4byte address support Yuan Yao
[U-Boot] [PATCH v1 2/4] spi: fsl_qspi: Add 4bytes address support Yuan Yao
[U-Boot] [PATCH v1 3/4] armv8: ls1012a: update the flash size to 64M. Yuan Yao
[U-Boot] [PATCH v1 4/4] armv8: ls1046a: update the flash size to 64M. Yuan Yao
[U-Boot] Chrome OS keyboard not responding on snow Adam Van Ymeren
[U-Boot] Chrome OS keyboard not responding on snow Adam Van Ymeren
[U-Boot] [PATCH 00/12] sh: change arch and boards code to generic board Vladimir Zapolskiy
[U-Boot] [PATCH] ARMv7: LS102xA: Move two macros from header files to Kconfig Hongbo Zhang
[U-Boot] [PATCH 0/6] Add ARMv8 PSCI framework Hongbo Zhang
[U-Boot] [PATCH 4/6] ARMv8: Setup PSCI memory and dt Hongbo Zhang
[U-Boot] [PATCH 5/6] ARMv8: Enable SMC instruction Hongbo Zhang
[U-Boot] [PATCH 0/6] Add ARMv8 PSCI framework Hongbo Zhang
[U-Boot] [PATCH] pbl: use "wait" command instead of "flush" command Qiang Zhao
[U-Boot] [PATCH v3 2/2] pbl: use "wait" command instead of "flush" command Qiang Zhao
[U-Boot] [PATCH v1 0/5] various fixes mainly for colibri_t20 Marcel Ziswiler
[U-Boot] [PATCH v1 1/5] tegra: usb gadget: fix ci udc operation if not hostpc capable Marcel Ziswiler
[U-Boot] [PATCH v1 2/5] simple panel: fix spelling of debug message Marcel Ziswiler
[U-Boot] [PATCH v1 3/5] colibri_t20: fix display configuration Marcel Ziswiler
[U-Boot] [PATCH v1 4/5] colibri_t20: fix usb operation and controller order Marcel Ziswiler
[U-Boot] [PATCH v1 5/5] colibri_t20: enable dfu also for nand Marcel Ziswiler
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Marcel Ziswiler
[U-Boot] [PATCH] Revert "net: asix: Fix AX88772B when used with DriverModel" Marcel Ziswiler
[U-Boot] [PATCH] Revert "net: asix: Fix AX88772B when used with DriverModel" Marcel Ziswiler
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Marcel Ziswiler
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Marcel Ziswiler
[U-Boot] net: asix: Fix AX88772B when used with DriverModel Marcel Ziswiler
[U-Boot] [PATCH v2] net: asix: Fix ASIX 88772B with driver model Marcel Ziswiler
[U-Boot] [PATCH] colibri_t30: fix usb ethernet functionality Marcel Ziswiler
[U-Boot] [PATCH] colibri_t30: fix usb ethernet functionality Marcel Ziswiler
[U-Boot] [PATCH v1 1/5] tegra: usb gadget: fix ci udc operation if not hostpc capable Marcel Ziswiler
[U-Boot] [PATCH v1 3/5] colibri_t20: fix display configuration Marcel Ziswiler
[U-Boot] [PATCH v1 4/5] colibri_t20: fix usb operation and controller order Marcel Ziswiler
[U-Boot] [PATCH v1 5/5] colibri_t20: enable dfu also for nand Marcel Ziswiler
[U-Boot] [PATCH v1 0/5] various fixes mainly for colibri_t20 Marcel Ziswiler
[U-Boot] [PATCH v1 5/5] colibri_t20: enable dfu also for nand Marcel Ziswiler
[U-Boot] [PATCH v1 3/5] colibri_t20: fix display configuration Marcel Ziswiler
[U-Boot] [PATCH v2 0/4] various fixes mainly for colibri_t20 Marcel Ziswiler
[U-Boot] [PATCH v2 1/4] tegra: usb gadget: fix ci udc operation if not hostpc capable Marcel Ziswiler
[U-Boot] [PATCH v2 2/4] simple panel: fix spelling of debug message Marcel Ziswiler
[U-Boot] [PATCH v2 3/4] colibri_t20: fix display configuration Marcel Ziswiler
[U-Boot] [PATCH v2 4/4] colibri_t20: fix usb operation and controller order Marcel Ziswiler
[U-Boot] [PATCH] ARM: vf610: use strcpy for soc environment variable Marcel Ziswiler
[U-Boot] [PATCH v2] apalis_t30: colibri_imx7: colibri_t30: fix ethernet functionality Marcel Ziswiler
[U-Boot] [PATCH v3 0/5] various fixes mainly for colibri_t20 Marcel Ziswiler
[U-Boot] [PATCH v3 1/5] tegra: usb gadget: fix ci udc operation if not hostpc capable Marcel Ziswiler
[U-Boot] [PATCH v3 2/5] simple panel: fix spelling of debug message Marcel Ziswiler
[U-Boot] [PATCH v3 3/5] regulator: fixed: honour optionality of enable gpio Marcel Ziswiler
[U-Boot] [PATCH v3 4/5] colibri_t20: fix display configuration Marcel Ziswiler
[U-Boot] [PATCH v3 5/5] colibri_t20: fix usb operation and controller order Marcel Ziswiler
[U-Boot] [PATCH v4 0/5] various fixes mainly for colibri_t20 Marcel Ziswiler
[U-Boot] [PATCH v4 1/5] tegra: usb gadget: fix ci udc operation if not hostpc capable Marcel Ziswiler
[U-Boot] [PATCH v4 2/5] simple panel: fix spelling of debug message Marcel Ziswiler
[U-Boot] [PATCH v4 3/5] regulator: fixed: honour optionality of enable gpio Marcel Ziswiler
[U-Boot] [PATCH v4 4/5] colibri_t20: fix display configuration Marcel Ziswiler
[U-Boot] [PATCH v4 5/5] colibri_t20: fix usb operation and controller order Marcel Ziswiler
[U-Boot] [PATCH v4 3/5] regulator: fixed: honour optionality of enable gpio Marcel Ziswiler
[U-Boot] [PATCH 0/5] toradex: config block handling Marcel Ziswiler
[U-Boot] [PATCH 1/5] colibri_imx7/vf: move to custom checkboard_fallback() Marcel Ziswiler
[U-Boot] [PATCH 2/5] apalis/colibri_t20/t30: deactivate displaying board info Marcel Ziswiler
[U-Boot] [PATCH 3/5] toradex: config block handling Marcel Ziswiler
[U-Boot] [PATCH 4/5] apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling Marcel Ziswiler
[U-Boot] [PATCH 5/5] apalis/colibri_t30: move environment location Marcel Ziswiler
[U-Boot] [PATCH v5 0/5] various fixes mainly for colibri_t20 Marcel Ziswiler
[U-Boot] [PATCH v5 1/5] tegra: usb gadget: fix ci udc operation if not hostpc capable Marcel Ziswiler
[U-Boot] [PATCH v5 2/5] simple panel: fix spelling of debug message Marcel Ziswiler
[U-Boot] [PATCH v5 3/5] regulator: fixed: honour optionality of enable gpio Marcel Ziswiler
[U-Boot] [PATCH v5 4/5] colibri_t20: fix display configuration Marcel Ziswiler
[U-Boot] [PATCH v5 5/5] colibri_t20: fix usb operation and controller order Marcel Ziswiler
[U-Boot] [PATCH 2/3] ARM: tegra: fix USB controller aliases Marcel Ziswiler
[U-Boot] [PATCH v6 0/5] various fixes mainly for colibri_t20 Marcel Ziswiler
[U-Boot] [PATCH v6 1/5] tegra: usb gadget: fix ci udc operation if not hostpc capable Marcel Ziswiler
[U-Boot] [PATCH v6 2/5] simple panel: fix spelling of debug message Marcel Ziswiler
[U-Boot] [PATCH v6 3/5] regulator: fixed: honour optionality of enable gpio Marcel Ziswiler
[U-Boot] [PATCH v6 4/5] colibri_t20: fix display configuration Marcel Ziswiler
[U-Boot] [PATCH v6 5/5] colibri_t20: fix usb operation and controller order Marcel Ziswiler
[U-Boot] [PATCH v2] ARM: vf610: use strcpy for soc environment variable Marcel Ziswiler
[U-Boot] [PATCH v2 0/6] toradex: config block handling Marcel Ziswiler
[U-Boot] [PATCH v2 1/6] colibri_imx7/vf: move to custom checkboard_fallback() Marcel Ziswiler
[U-Boot] [PATCH v2 2/6] apalis/colibri_t20/t30: deactivate displaying board info Marcel Ziswiler
[U-Boot] [PATCH v2 3/6] toradex: config block handling Marcel Ziswiler
[U-Boot] [PATCH v2 4/6] apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling Marcel Ziswiler
[U-Boot] [PATCH v2 5/6] apalis/colibri_t30: move environment location Marcel Ziswiler
[U-Boot] [PATCH v2 6/6] colibri_vf: usb gadget: toradex pid is now set generically Marcel Ziswiler
[U-Boot] [PATCH v2 2/6] apalis/colibri_t20/t30: deactivate displaying board info Marcel Ziswiler
[U-Boot] [PATCH v2 5/6] apalis/colibri_t30: move environment location Marcel Ziswiler
[U-Boot] [PATCH] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode Marc Zyngier
[U-Boot] Uboot send pull request uboot at andestech.com
[U-Boot] usb start on a specific instance Nicolas le bayon
[U-Boot] interaction between CONFIG_CMD_SAVEENV and CONFIG_BOOTCOMMAND Nicolas le bayon
[U-Boot] interaction between CONFIG_CMD_SAVEENV and CONFIG_BOOTCOMMAND Nicolas le bayon
[U-Boot] interaction between CONFIG_CMD_SAVEENV and CONFIG_BOOTCOMMAND Nicolas le bayon
[U-Boot] [FASTBOOT] increase envstr[] length from 32 to 64 Nicolas le bayon
[U-Boot] [PATCH] usb gadget: increase envstr size in cb_getvar Nicolas le bayon
[U-Boot] [PATCH] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC linux-kernel-dev at beckhoff.com
[U-Boot] ARM: tegra: jetson-tk1: Increase console buffer size Peter.Chubb at data61.csiro.au
[U-Boot] ARM: tegra: jetson-tk1: Increase console buffer size Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH v2] ARM: tegra: increase console buffer size and sys args num Peter.Chubb at data61.csiro.au
[U-Boot] RFC: 'fastboot boot' uses wrong address when calling bootm Peter.Chubb at data61.csiro.au
[U-Boot] "_ENTRY" is both a struct and a typedef? Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH] Fix fastboot boot address Fastboot loads an image at CONFIG_FASTBOOT_BUF_ADDR, but currently tells do_bootm() to look for an image at $loadaddr. This breaks if CONFIG_FASTBOOT_BUF_ADDR is different from the current user-set loadaddr. Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH] Fix fastboot boot address Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH v2] rtl8169: fix cache misalignment message on transmit. Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH v2] Fix cache misalignment after network load operations Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH v2] Fix cache misalignment after network load operations Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH v3] net: Fix cache misalignment message after network load operations Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH v3] net: Fix cache misalignment message after network load operations Peter.Chubb at data61.csiro.au
[U-Boot] Sdcard boot for a generic allwinner q8 clone A33 tablet not work. far5893
[U-Boot] Sdcard boot for a generic allwinner q8 clone A33 tablet not work. far5893
[U-Boot] [PATCH] ARMv7: LS102xA: Move two macros from header files to Kconfig macro.wave.z at gmail.com
[U-Boot] [PATCH v2] ARMv7: LS102xA: Move two macros from header files to Kconfig macro.wave.z at gmail.com
[U-Boot] [PATCH 0/6] Add ARMv8 PSCI framework macro.wave.z at gmail.com
[U-Boot] [PATCH 1/6] ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition macro.wave.z at gmail.com
[U-Boot] [PATCH 2/6] ARMv8: Add secure sections for PSCI text and data macro.wave.z at gmail.com
[U-Boot] [PATCH 3/6] ARMv8: Add basic PSCI framework macro.wave.z at gmail.com
[U-Boot] [PATCH 4/6] ARMv8: Setup PSCI memory and dt macro.wave.z at gmail.com
[U-Boot] [PATCH 5/6] ARMv8: Enable SMC instruction macro.wave.z at gmail.com
[U-Boot] [PATCH 6/6] ARMv8: LS1043A: Enable LS1043A default PSCI support macro.wave.z at gmail.com
[U-Boot] [PATCH v2 0/4] Migrate Vybrid USB driver to driver model maitysanchayan at gmail.com
[U-Boot] [PATCH 1/2] lpuart: add a get_lpuart_clk function shh.xie at gmail.com
[U-Boot] [PATCH 2/2] armv8: ls1046aqds: add lpuart support shh.xie at gmail.com
[U-Boot] [PATCH] imx-common: enlarge mux width to 4 van.freenix at gmail.com
[U-Boot] [PATCH] imx: imx6ul: disable POR_B internal pull up van.freenix at gmail.com
[U-Boot] [PATCH 1/5] tools: imximage: add plugin support van.freenix at gmail.com
[U-Boot] [PATCH 2/5] imx: mx6: Add plugin support van.freenix at gmail.com
[U-Boot] [PATCH 3/5] imx: mx7: Add plugin support van.freenix at gmail.com
[U-Boot] [PATCH 4/5] imx: mx6ullevk: support plugin van.freenix at gmail.com
[U-Boot] [PATCH 5/5] imx: mx6ullevk: correct boot device macro van.freenix at gmail.com
[U-Boot] Passing squashfs of unknown size to linux kkaras
[U-Boot] [PATCH v1 2/2] clk: at91: Add .ops callback for clk_generic Wenyou.Yang at microchip.com
[U-Boot] [PATCH v1 2/2] clk: at91: Add .ops callback for clk_generic Wenyou.Yang at microchip.com
[U-Boot] [PATCH v1 2/2] clk: at91: Add .ops callback for clk_generic Wenyou.Yang at microchip.com
[U-Boot] [PATCH 5/6] at91: add function to set IO drive Wenyou.Yang at microchip.com
[U-Boot] [PATCH 1/6] arm: at91: mpddrc: add missing MPDDRC_MD defines Wenyou.Yang at microchip.com
[U-Boot] [PATCH 4/6] arm, at91: add some missing fields in PIO struct Wenyou.Yang at microchip.com
[U-Boot] [PATCH 2/6] ARM: at91: clock: correct PRES offset for at91sam9x5 Wenyou.Yang at microchip.com
[U-Boot] [PATCH 6/6] [RFC] at91: SPL clock fix for AT91SAM9G15 based boards. Wenyou.Yang at microchip.com
[U-Boot] [PATCH v1 2/7] clk: at91: Improve the clock implementation Wenyou.Yang at microchip.com
[U-Boot] [PATCH v2] dm/mmc: gen_atmel_mci: Add driver model support for mci Wenyou.Yang at microchip.com
[U-Boot] [PATCH v1] ARM: dts: Makefile: Use board to decide to compile dts Wenyou.Yang at microchip.com
[U-Boot] Testing U-Boot port for Gumstix verdex pxa270 raashidmuhammed
[U-Boot] [patch v2 1/2] pxe: Fix pxe boot with FIT image Wenbin song
[U-Boot] [patch v2 2/2] pxe: Modify README to add the description about FIT image Wenbin song
[U-Boot] [patch v3 1/2] pxe: Fix pxe boot with FIT image Wenbin song
[U-Boot] [patch v3 2/2] pxe: Modify README to add the description about FIT image Wenbin song
[U-Boot] [PATCH] armv8/fsl-layerscape: print SoC revsion number Wenbin song
[U-Boot] [PATCH] armv8/fsl-layerscape: print SoC revsion number Wenbin song
[U-Boot] [PATCH] armv7: ls102xa: add lowlevel init york sun
[U-Boot] [u-boot-release] [PATCH] fsl_sfp : Modify macros as per changes in SFP v3.4 york sun
[U-Boot] [PATCH] armv7: ls102xa: add lowlevel init york sun
[U-Boot] [PATCH] armv7: ls102xa: add lowlevel init york sun
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions york sun
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock york sun
[U-Boot] [PATCH 1/2] Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand. york sun
[U-Boot] [PATCH 2/2] pbl: use "wait" command instead of "flush" command york sun
[U-Boot] [PATCH] armv8: ls1043a: Extend the size for SPL york sun
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock york sun
[U-Boot] [PATCH 1/2][v2] arch: powerpc: update the IFC IP input clock york sun
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock york sun
[U-Boot] [PATCH] arch: ifc: update the IFC IP input clock york sun
[U-Boot] [Patch v6 5/9] armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r york sun
[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support york sun
[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support york sun
[U-Boot] [PATCH 1/2] armv8/fsl-lsch2: refactor the clock system initialization york sun
[U-Boot] [v2, 1/5] mmc: fsl_esdhc: don't set XFERTYP_RSPTYP_48_BUSY for CMD with busy response york sun
[U-Boot] [Patch v6 5/9] armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r york sun
[U-Boot] [Patch v6 5/9] armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r york sun
[U-Boot] [PATCH v2] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree york sun
[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support york sun
[U-Boot] [PATCH] ARMv7: LS102xA: Move two macros from header files to Kconfig york sun
[U-Boot] [RESEND Patch v2] net: fm: fix spi flash probe for using driver model york sun
[U-Boot] [PATCH] armv8: fsl-layerscape: Update ddr erratum a008336 york sun
[U-Boot] [PATCH 1/2] driver/ddr/fsl: Add more debug registers york sun
[U-Boot] [PATCH 2/2] driver/ddr/fsl: Revise workaround A008511 for A009803 york sun
[U-Boot] [PATCH v2 1/2] board: ls1043ardb: move sec_init to board_init york sun
[U-Boot] [PATCH v2 2/2] ls1043ardb: PPA: add PPA validation in case of secure boot york sun
[U-Boot] [PATCHv2 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol york sun
[U-Boot] [PATCH] armv8: ls2080a: Remove debug server support york sun
[U-Boot] [UBOOT PATCH 1/4] armv7: psci: make v7_flush_dcache_all public for all psci code york sun
[U-Boot] [PATCH] armv7:ls1021a: Enable workaround for DDR erratum A-009942 york sun
[U-Boot] [PATCH] driver/ddr/fsl: Add general MMDC driver and reuse common MMDC driver for ls1012a york sun
[U-Boot] [Patch v6 0/9] Add LS1046ARDB&QDS board support york sun
[U-Boot] Please pull u-boot-fsl-qoriq master york sun
[U-Boot] Please pull u-boot-fsl-qoriq master york sun
[U-Boot] Please pull u-boot-fsl-qoriq master york sun
[U-Boot] ad-hoc config error york sun
[U-Boot] ad-hoc config error york sun
[U-Boot] ad-hoc config error york sun
[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support york sun
[U-Boot] ad-hoc config error york sun
[U-Boot] ad-hoc config error york sun
[U-Boot] [RFC Patch 0/5] Resolve conflict for merging york sun
[U-Boot] ad-hoc config error york sun
[U-Boot] ad-hoc config error york sun
[U-Boot] Please pull fsl-qoriq master york sun
[U-Boot] [PATCH 4/6] ARMv8: Setup PSCI memory and dt york sun
[U-Boot] [RFC] Rearrange CONFIG_* macros york sun
[U-Boot] [RFC] Rearrange CONFIG_* macros york sun
[U-Boot] [RFC] Rearrange CONFIG_* macros york sun
[U-Boot] [PATCH v4] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller york sun
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests york sun
[U-Boot] ccache and buildman york sun
[U-Boot] ccache and buildman york sun
[U-Boot] [PATCH v3 0/3] Modifies the erratum A006261 according to endianness york sun
[U-Boot] Please pull u-boot-85xx master york sun
[U-Boot] ccache and buildman york sun
[U-Boot] ccache and buildman york sun
[U-Boot] [RFC] Rearrange CONFIG_* macros york sun
[U-Boot] [RFC] Rearrange CONFIG_* macros york sun
[U-Boot] [RFC] Rearrange CONFIG_* macros york sun
[U-Boot] FDT pointer value, passed by the PI firmware, is not set in u-boot dh at synoia.com
[U-Boot] Fw: FDT pointer value, passed by the PI firmware, is not set in u-boot dh at synoia.com
[U-Boot] [PATCH] ARM: Add register defines for am33xx ePWM registers tomas.melin at vaisala.com
[U-Boot] [PATCH] ARM: Add register defines for am33xx ePWM registers tomas.melin at vaisala.com
[U-Boot] [PATCH] Cash flash correction of do_load() yoko
[U-Boot] [PATCH] Cash flash correction of do_load() yoko
[U-Boot] [PATCH 2/3] rockchip: add usb mass storage feature support for rk3036 陈豪

Last message date: Fri Sep 30 23:19:12 CEST 2016
Archived on: Tue Oct 4 12:30:31 CEST 2016

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).