[U-Boot] [RFC PATCH 3/6] arm: Move MAX_CPUS to Kconfig

[York Sun]

Move MAX_CPUS option to Kconfig and clean up existing uses for ARM. This
option is used by Freescale Layerscape SoCs.

Signed-off-by: York Sun <york.sun at nxp.com>
---
 arch/arm/cpu/armv7/ls102xa/Kconfig                | 11 +++++++++++
 arch/arm/cpu/armv8/fsl-layerscape/Kconfig         | 13 +++++++++++++
 arch/arm/include/asm/arch-fsl-layerscape/config.h |  4 ----
 arch/arm/include/asm/arch-ls102xa/config.h        |  1 -
 4 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 2648416..e8264f5 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -9,6 +9,17 @@ config LS1_DEEP_SLEEP
 	bool "Deep sleep"
 	depends on ARCH_LS1021A
 
+config MAX_CPUS
+	int "Maximum number of CPUs permitted for LS102xA"
+	depends on ARCH_LS1021A
+	default 2
+	help
+	  Set this number to the maximum number of possible CPUs in the SoC.
+	  SoCs may have multiple clusters with each cluster may have multiple
+	  ports. If some ports are reserved but higher ports are used for
+	  cores, count the reserved ports. This will allocate enough memory
+	  in spin table to properly handle all cores.
+
 config SYS_FSL_ERRATUM_A010315
 	bool "Workaround for PCIe erratum A010315"
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 5619e0d..6d87fd8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -32,4 +32,17 @@ config SYS_FSL_MMDC
 config SYS_FSL_ERRATUM_A010315
 	bool "Workaround for PCIe erratum A010315"
 
+config MAX_CPUS
+	int "Maximum number of CPUs permitted for Layerscape"
+	default 4 if ARCH_LS1043A
+	default 4 if ARCH_LS1046A
+	default 16 if ARCH_LS2080A
+	default 1
+	help
+	  Set this number to the maximum number of possible CPUs in the SoC.
+	  SoCs may have multiple clusters with each cluster may have multiple
+	  ports. If some ports are reserved but higher ports are used for
+	  cores, count the reserved ports. This will allocate enough memory
+	  in spin table to properly handle all cores.
+
 endmenu
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index a5c6c4c..572fa94 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -30,7 +30,6 @@
 #define CONFIG_SYS_MEM_RESERVE_SECURE	(2048 * 1024)	/* 2MB */
 
 #ifdef CONFIG_LS2080A
-#define CONFIG_MAX_CPUS				16
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT		8
 #define CONFIG_NUM_DDR_CONTROLLERS		3
 #define CONFIG_SYS_FSL_HAS_DP_DDR		/* Runtime check to confirm */
@@ -171,7 +170,6 @@
 
 /* SoC related */
 #ifdef CONFIG_LS1043A
-#define CONFIG_MAX_CPUS				4
 #define CONFIG_SYS_FMAN_V3
 #define CONFIG_SYS_NUM_FMAN			1
 #define CONFIG_SYS_NUM_FM1_DTSEC		7
@@ -206,13 +204,11 @@
 #define CONFIG_SYS_FSL_ERRATUM_A009660
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
 #elif defined(CONFIG_ARCH_LS1012A)
-#define CONFIG_MAX_CPUS                         1
 #undef	CONFIG_SYS_FSL_DDRC_ARM_GEN3
 
 #define GICD_BASE		0x01401000
 #define GICC_BASE		0x01402000
 #elif defined(CONFIG_ARCH_LS1046A)
-#define CONFIG_MAX_CPUS				4
 #define CONFIG_SYS_FMAN_V3
 #define CONFIG_SYS_NUM_FMAN			1
 #define CONFIG_SYS_NUM_FM1_DTSEC		8
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index fab8774..70cc703 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -123,7 +123,6 @@
 #define CONFIG_SYS_FSL_SRDS_1
 
 #ifdef CONFIG_LS102XA
-#define CONFIG_MAX_CPUS				2
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT		8
 #define CONFIG_NUM_DDR_CONTROLLERS		1
 #define CONFIG_SYS_FSL_DDR_VER			FSL_DDR_VER_5_0
-- 
2.7.4