[U-Boot] [PATCH 1/3] treewide: rename CONFIG_SPL_SERIAL_SUPPORT to CONFIG_SPL_SERIAL
Masahiro Yamada
yamada.masahiro at socionext.com
Sun Sep 11 16:21:15 CEST 2016
We conventionally named SPL options in CONFIG_SPL_*_SUPPORT format,
but the suffix _SUPPORT did not add any value. Besides, it prevents
us from exploiting the CONFIG_IS_ENABLED() macro.
If we move the option to defconfig files (that are often re-synced),
the renaming would be more conflict-happy, so I want to do this now.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
README | 2 +-
common/Makefile | 2 +-
common/spl/spl.c | 2 +-
doc/README.SPL | 2 +-
drivers/Makefile | 2 +-
include/common.h | 2 +-
include/configs/B4860QDS.h | 2 +-
include/configs/BSC9131RDB.h | 2 +-
include/configs/BSC9132QDS.h | 2 +-
include/configs/C29XPCIE.h | 4 ++--
include/configs/MPC8313ERDB.h | 2 +-
include/configs/P1010RDB.h | 10 +++++-----
include/configs/P1022DS.h | 8 ++++----
include/configs/T102xQDS.h | 2 +-
include/configs/T102xRDB.h | 2 +-
include/configs/T104xRDB.h | 2 +-
include/configs/T208xQDS.h | 2 +-
include/configs/T208xRDB.h | 2 +-
include/configs/T4240QDS.h | 2 +-
include/configs/T4240RDB.h | 2 +-
include/configs/a3m071.h | 2 +-
include/configs/am3517_crane.h | 2 +-
include/configs/am3517_evm.h | 2 +-
include/configs/apf27.h | 2 +-
include/configs/at91sam9m10g45ek.h | 2 +-
include/configs/at91sam9n12ek.h | 2 +-
include/configs/at91sam9x5ek.h | 2 +-
include/configs/bur_am335x_common.h | 2 +-
include/configs/clearfog.h | 2 +-
include/configs/cm_t35.h | 2 +-
include/configs/corvus.h | 2 +-
include/configs/da850evm.h | 2 +-
include/configs/db-88f6720.h | 2 +-
include/configs/db-88f6820-gp.h | 2 +-
include/configs/db-mv784mp-gp.h | 2 +-
include/configs/devkit3250.h | 2 +-
include/configs/ds414.h | 2 +-
include/configs/edminiv2.h | 2 +-
include/configs/imx6_spl.h | 2 +-
include/configs/ipam390.h | 2 +-
include/configs/kc1.h | 2 +-
include/configs/ls1021aqds.h | 4 ++--
include/configs/ls1021atwr.h | 2 +-
include/configs/ls1043a_common.h | 4 ++--
include/configs/ls2080a_common.h | 2 +-
include/configs/m53evk.h | 2 +-
include/configs/ma5d4evk.h | 2 +-
include/configs/maxbcm.h | 2 +-
include/configs/mcx.h | 2 +-
include/configs/microblaze-generic.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mxs.h | 2 +-
include/configs/omap3_evm.h | 2 +-
include/configs/omapl138_lcdk.h | 2 +-
include/configs/p1_p2_rdb_pc.h | 8 ++++----
include/configs/picosam9g45.h | 2 +-
include/configs/rk3036_common.h | 2 +-
include/configs/rk3288_common.h | 2 +-
include/configs/sama5d2_ptc.h | 2 +-
include/configs/sama5d2_xplained.h | 2 +-
include/configs/sama5d3_xplained.h | 2 +-
include/configs/sama5d3xek.h | 2 +-
include/configs/sama5d4_xplained.h | 2 +-
include/configs/sama5d4ek.h | 2 +-
include/configs/sandbox_spl.h | 2 +-
include/configs/siemens-am33x-common.h | 2 +-
include/configs/sniper.h | 2 +-
include/configs/socfpga_common.h | 2 +-
include/configs/sunxi-common.h | 2 +-
include/configs/tam3517-common.h | 2 +-
include/configs/tao3530.h | 2 +-
include/configs/taurus.h | 2 +-
include/configs/tegra-common.h | 2 +-
include/configs/theadorable.h | 2 +-
include/configs/ti814x_evm.h | 2 +-
include/configs/ti816x_evm.h | 2 +-
include/configs/ti_armv7_common.h | 2 +-
include/configs/tricorder.h | 2 +-
include/configs/uniphier.h | 2 +-
include/configs/woodburn_sd.h | 2 +-
include/configs/work_92105.h | 2 +-
include/configs/x600.h | 2 +-
include/configs/xilinx_zynqmp.h | 2 +-
include/configs/zynq-common.h | 2 +-
lib/Makefile | 4 ++--
lib/hang.c | 2 +-
86 files changed, 100 insertions(+), 100 deletions(-)
diff --git a/README b/README
index f41a6af..bf6e674 100644
--- a/README
+++ b/README
@@ -3638,7 +3638,7 @@ FIT uImage format:
Support for an OMAP3-specific set of functions to return the
ID and MFR of the first attached NAND chip, if present.
- CONFIG_SPL_SERIAL_SUPPORT
+ CONFIG_SPL_SERIAL
Support for drivers/serial/libserial.o in SPL binary
CONFIG_SPL_SPI_FLASH_SUPPORT
diff --git a/common/Makefile b/common/Makefile
index 21619b3..edfeb9f 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -123,7 +123,7 @@ obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o
obj-$(CONFIG_HWCONFIG) += hwconfig.o
obj-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_SERIAL_SUPPORT) += console.o
+obj-$(CONFIG_SPL_SERIAL) += console.o
else
obj-y += console.o
endif
diff --git a/common/spl/spl.c b/common/spl/spl.c
index e14ec80..346c0ef 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -407,7 +407,7 @@ static int spl_load_image(u32 boot_device)
return spl_board_load_image();
#endif
default:
-#if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+#if defined(CONFIG_SPL_SERIAL) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
puts("SPL: Unsupported Boot Device!\n");
#endif
return -ENODEV;
diff --git a/doc/README.SPL b/doc/README.SPL
index 3ba313c..c4b3f02 100644
--- a/doc/README.SPL
+++ b/doc/README.SPL
@@ -50,7 +50,7 @@ CONFIG_SPL_LIBDISK_SUPPORT (disk/libdisk.o)
CONFIG_SPL_I2C_SUPPORT (drivers/i2c/libi2c.o)
CONFIG_SPL_GPIO_SUPPORT (drivers/gpio/libgpio.o)
CONFIG_SPL_MMC_SUPPORT (drivers/mmc/libmmc.o)
-CONFIG_SPL_SERIAL_SUPPORT (drivers/serial/libserial.o)
+CONFIG_SPL_SERIAL (drivers/serial/libserial.o)
CONFIG_SPL_SPI_FLASH_SUPPORT (drivers/mtd/spi/libspi_flash.o)
CONFIG_SPL_SPI_SUPPORT (drivers/spi/libspi.o)
CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o)
diff --git a/drivers/Makefile b/drivers/Makefile
index 7861d34..b4748cb 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
-obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
+obj-$(CONFIG_SPL_SERIAL) += serial/
obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
diff --git a/include/common.h b/include/common.h
index e9f0dea..e890f90 100644
--- a/include/common.h
+++ b/include/common.h
@@ -866,7 +866,7 @@ int getc(void);
int tstc(void);
/* stdout */
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL)
#define putc(...) do { } while (0)
#define puts(...) do { } while (0)
#define printf(...) do { } while (0)
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 2a8aeee..3608d28 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -23,7 +23,7 @@
#else
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index a0ca0db..6c64c28 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -28,7 +28,7 @@
#ifdef CONFIG_NAND
#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index eb6ddae..32d1baf 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -44,7 +44,7 @@
#ifdef CONFIG_NAND
#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index f75919d..4b6bd2f 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -29,7 +29,7 @@
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
@@ -46,7 +46,7 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)
#elif defined(CONFIG_SPL_BUILD)
#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 1c4e082..d8b8a5e 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -22,7 +22,7 @@
#ifdef CONFIG_NAND
#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 0c84622..293c621 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -22,7 +22,7 @@
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_MMC_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
@@ -56,7 +56,7 @@
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_FLASH_MINIMAL
@@ -86,7 +86,7 @@
#ifdef CONFIG_NAND
#ifdef CONFIG_SECURE_BOOT
#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
@@ -108,7 +108,7 @@
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
@@ -125,7 +125,7 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)
#elif defined(CONFIG_SPL_BUILD)
#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 9fbc128..7699a6a 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -16,7 +16,7 @@
#ifdef CONFIG_SDCARD
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_MMC_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
@@ -44,7 +44,7 @@
#ifdef CONFIG_SPIFLASH
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_FLASH_MINIMAL
@@ -80,7 +80,7 @@
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
@@ -96,7 +96,7 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)
#elif defined(CONFIG_SPL_BUILD)
#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TEXT_BASE 0xff800000
diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index 2218907..4d15018 100644
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -45,7 +45,7 @@
#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index d5fd3e9..a7a737d 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -52,7 +52,7 @@
#endif
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 07c511f..9b7bb60 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -45,7 +45,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 065ffcd..24a5a5b 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -55,7 +55,7 @@
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 1a8c62e..294447d 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -44,7 +44,7 @@
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h
index 06f03aa..243aa6a 100644
--- a/include/configs/T4240QDS.h
+++ b/include/configs/T4240QDS.h
@@ -27,7 +27,7 @@
#else
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 38ad503..5ead420 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -27,7 +27,7 @@
#else
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index ab2477c..60abff2 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -401,7 +401,7 @@
#define CONFIG_SPL_TEXT_BASE 0xfc000000
#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
/* Place BSS for SPL near end of SDRAM */
#define CONFIG_SPL_BSS_START_ADDR ((128 - 1) << 20)
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 0055803..23e1ccc 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -293,7 +293,7 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 98c29b0..e5ee6f3 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -350,7 +350,7 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
diff --git a/include/configs/apf27.h b/include/configs/apf27.h
index e84cfb5..83383f2 100644
--- a/include/configs/apf27.h
+++ b/include/configs/apf27.h
@@ -38,7 +38,7 @@
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_MAX_SIZE 2048
#define CONFIG_SPL_TEXT_BASE 0xA0000000
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
/* NAND boot config */
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 37fa3ec..6531789 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -188,7 +188,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SYS_MONITOR_LEN 0x80000
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 5fdda1a..a881cb4 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -233,7 +233,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 637c403..6bb240c 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -233,7 +233,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 1de5edc..e47165e 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -116,7 +116,7 @@
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_YMODEM_SUPPORT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 6cbdee2..6d14d39 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -125,7 +125,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_I2C_SUPPORT
#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 562ba56..5926f84 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -312,7 +312,7 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index db90f92..16f71e8 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -162,7 +162,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_GPIO_SUPPORT
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index ef0fd59..cfad56c 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -343,7 +343,7 @@
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h
index 4e00812..9960d3f 100644
--- a/include/configs/db-88f6720.h
+++ b/include/configs/db-88f6720.h
@@ -93,7 +93,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_I2C_SUPPORT
/* SPL related SPI defines */
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 88614b3..9ac7ad6 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -126,7 +126,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_I2C_SUPPORT
#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index 5cdfd1c..f9c12ed 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -118,7 +118,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_I2C_SUPPORT
/* SPL related SPI defines */
diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index abf1394..d287c82 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -197,7 +197,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
/* SPL will use serial */
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
/* SPL loads an image from NAND */
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index 11c1ec4..2c46768 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -124,7 +124,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_I2C_SUPPORT
/* SPL related SPI defines */
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index c30b63b..8e4366b 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -19,7 +19,7 @@
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NOR_SUPPORT
#define CONFIG_SPL_TEXT_BASE 0xffff0000
#define CONFIG_SPL_MAX_SIZE 0x0000fff0
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 9bd9f6e..89a9a49 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -31,7 +31,7 @@
#define CONFIG_SPL_STACK 0x0091FFB8
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
index 37a5fa4..db0e65f 100644
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -285,7 +285,7 @@
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-ipam390.lds"
diff --git a/include/configs/kc1.h b/include/configs/kc1.h
index c1a9e64..6b1e72f 100644
--- a/include/configs/kc1.h
+++ b/include/configs/kc1.h
@@ -132,7 +132,7 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 105702d..d7045ea 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -73,7 +73,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
@@ -111,7 +111,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 90ae770..9af1ca1 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -118,7 +118,7 @@
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index e55fcb2..34c480f 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -66,7 +66,7 @@
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0
@@ -96,7 +96,7 @@
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index ebe1415..c76c868 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -275,7 +275,7 @@ unsigned long long get_qixis_addr(void);
#define CONFIG_SPL_MAX_SIZE 0x16000
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0x1800a000
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index fd47a72..7059023 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -243,7 +243,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h
index a696c1a..b4ad62f 100644
--- a/include/configs/ma5d4evk.h
+++ b/include/configs/ma5d4evk.h
@@ -219,7 +219,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index 47d2948..d980db8 100644
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -86,7 +86,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_I2C_SUPPORT
/* SPL related SPI defines */
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 22a54c7..cddeb4b 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -326,7 +326,7 @@
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BASE
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index e5bf700..6707f4d 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -287,7 +287,7 @@
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds"
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index a81dd78..33587f0 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -33,7 +33,7 @@
#define CONFIG_SPL_MAX_SIZE 2048
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_TEXT_BASE 0x87dc0000
#define CONFIG_SYS_TEXT_BASE 0x87e00000
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index d80dc5e..70f4457 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -51,7 +51,7 @@
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_GPIO_SUPPORT
/* Memory sizes */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index b134ac9..909d32d 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -353,7 +353,7 @@
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_OMAP3_ID_NAND
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 43afecd..4fcb011 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -268,7 +268,7 @@
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index ae0f6a5..08d5f60 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -183,7 +183,7 @@
#ifdef CONFIG_SDCARD
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_MMC_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
@@ -211,7 +211,7 @@
#ifdef CONFIG_SPIFLASH
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_FLASH_MINIMAL
@@ -243,7 +243,7 @@
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
@@ -259,7 +259,7 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)
#elif defined(CONFIG_SPL_BUILD)
#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
index c2e2c43..f911bbc 100644
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -165,7 +165,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h
index 101a3ed..0fda5de 100644
--- a/include/configs/rk3036_common.h
+++ b/include/configs/rk3036_common.h
@@ -24,7 +24,7 @@
#define CONFIG_SYS_TIMER_BASE 0x200440a0 /* TIMER5 */
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_MEM32
diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index 601186c..4a9f3e5 100644
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -27,7 +27,7 @@
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h
index c1c01bd..517a4d6 100644
--- a/include/configs/sama5d2_ptc.h
+++ b/include/configs/sama5d2_ptc.h
@@ -124,7 +124,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 563c045..d45af43 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -128,7 +128,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index fef925f..ca14128 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -127,7 +127,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 248de8d..236560e 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -167,7 +167,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index d874ab5..468daa6 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -127,7 +127,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index 61c3f85..4872315 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -125,7 +125,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
diff --git a/include/configs/sandbox_spl.h b/include/configs/sandbox_spl.h
index ffc3098..a93323d 100644
--- a/include/configs/sandbox_spl.h
+++ b/include/configs/sandbox_spl.h
@@ -15,6 +15,6 @@
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#endif
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 3eca93b..068a743 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -141,7 +141,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_YMODEM_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
diff --git a/include/configs/sniper.h b/include/configs/sniper.h
index 5062cd0..b060366 100644
--- a/include/configs/sniper.h
+++ b/include/configs/sniper.h
@@ -140,7 +140,7 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index b3fb245..60ec374 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -325,7 +325,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#ifdef CONFIG_DM_MMC
#define CONFIG_SPL_MMC_SUPPORT
#endif
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 708ab17..ff7d5ae 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -190,7 +190,7 @@
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_BOARD_LOAD_IMAGE
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index a63db65..53d556c 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -207,7 +207,7 @@
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 696ca32..8768d74 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -294,7 +294,7 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 2c41dd8..215e388 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -260,7 +260,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_GPIO_SUPPORT
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 7b0940a..1338f48 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -124,7 +124,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index 8bbf879..776f13f 100644
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -151,7 +151,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_I2C_SUPPORT
/* SPL related SPI defines */
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 82ab479..d0641e4 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -172,7 +172,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index e3cd647..6d20760 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -138,7 +138,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 32cb202..11953bb 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -273,7 +273,7 @@
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index e5d321a..f303855 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -324,7 +324,7 @@
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BASE
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index b3ca46b..9e9f66c 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -277,7 +277,7 @@
#define CONFIG_PANIC_HANG
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NOR_SUPPORT
#ifdef CONFIG_ARM64
#define CONFIG_SPL_BOARD_LOAD_IMAGE
diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h
index 25bfeef..78c284a 100644
--- a/include/configs/woodburn_sd.h
+++ b/include/configs/woodburn_sd.h
@@ -25,7 +25,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x100 /* address 0x60000 */
diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index b2103b4..bfb8d3c 100644
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -191,7 +191,7 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
/* SPL will use serial */
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
/* SPL will load U-Boot from NAND offset 0x40000 */
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_DRIVERS
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 4af6b67..81b1a3f 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -268,7 +268,7 @@
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NOR_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 02f0e4c..e0979df 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -262,7 +262,7 @@
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_RAM_DEVICE
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 5f7fefd..aa1fe44 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -295,7 +295,7 @@
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_RAM_DEVICE
diff --git a/lib/Makefile b/lib/Makefile
index f6a8ba1..7a0fe16 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -80,9 +80,9 @@ obj-$(CONFIG_LIB_RAND) += rand.o
ifdef CONFIG_SPL_BUILD
# SPL U-Boot may use full-printf, tiny-printf or none at all
ifdef CONFIG_USE_TINY_PRINTF
-obj-$(CONFIG_SPL_SERIAL_SUPPORT) += tiny-printf.o panic.o strto.o
+obj-$(CONFIG_SPL_SERIAL) += tiny-printf.o panic.o strto.o
else
-obj-$(CONFIG_SPL_SERIAL_SUPPORT) += vsprintf.o panic.o strto.o strmhz.o
+obj-$(CONFIG_SPL_SERIAL) += vsprintf.o panic.o strto.o strmhz.o
endif
else
# Main U-Boot always uses the full printf support
diff --git a/lib/hang.c b/lib/hang.c
index 9246e12..ce90827 100644
--- a/lib/hang.c
+++ b/lib/hang.c
@@ -22,7 +22,7 @@
void hang(void)
{
#if !defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && \
- defined(CONFIG_SPL_SERIAL_SUPPORT))
+ defined(CONFIG_SPL_SERIAL))
puts("### ERROR ### Please RESET the board ###\n");
#endif
bootstage_error(BOOTSTAGE_ID_NEED_RESET);
--
1.9.1
More information about the U-Boot
mailing list