[U-Boot] [PATCH 9/9] ARM: bcm283x: use OF_CONTROL for bcm283x

[Fabian Vogt]

This patch removes use of U_BOOT_DEVICE in board/raspberrypi/rpi/rpi.c,
enables OF_CONTROL in the config and adjusts the rpi_*defconfig configs.

Signed-off-by: Fabian Vogt <fvogt at suse.com>
---
 arch/arm/Kconfig            |  1 +
 board/raspberrypi/rpi/rpi.c | 37 -------------------------------------
 configs/rpi_2_defconfig     |  2 ++
 configs/rpi_3_32b_defconfig |  2 ++
 configs/rpi_3_defconfig     |  2 ++
 configs/rpi_defconfig       |  2 ++
 6 files changed, 9 insertions(+), 37 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a311215..cca6933 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -316,6 +316,7 @@ config ARCH_BCM283X
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
+	select OF_CONTROL
 
 config TARGET_VEXPRESS_CA15_TC2
 	bool "Support vexpress_ca15_tc2"
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 09bfcc6..389e056 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -17,7 +17,6 @@
 #include <asm/arch/mbox.h>
 #include <asm/arch/sdhci.h>
 #include <asm/global_data.h>
-#include <dm/platform_data/serial_pl01x.h>
 #include <dm/platform_data/serial_bcm283x_mu.h>
 #ifdef CONFIG_ARM64
 #include <asm/armv8/mmu.h>
@@ -25,42 +24,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static const struct bcm2835_gpio_platdata gpio_platdata = {
-	.base = BCM2835_GPIO_BASE,
-};
-
-U_BOOT_DEVICE(bcm2835_gpios) = {
-	.name = "gpio_bcm2835",
-	.platdata = &gpio_platdata,
-};
-
-#ifdef CONFIG_PL01X_SERIAL
-static const struct pl01x_serial_platdata serial_platdata = {
-#ifndef CONFIG_BCM2835
-	.base = 0x3f201000,
-#else
-	.base = 0x20201000,
-#endif
-	.type = TYPE_PL011,
-	.skip_init = true,
-};
-
-U_BOOT_DEVICE(bcm2835_serials) = {
-	.name = "serial_pl01x",
-	.platdata = &serial_platdata,
-};
-#else
-static struct bcm283x_mu_serial_platdata serial_platdata = {
-	.base = 0x3f215040,
-	.clock = 250000000,
-	.skip_init = true,
-};
-
-U_BOOT_DEVICE(bcm2837_serials) = {
-	.name = "serial_bcm283x_mu",
-	.platdata = &serial_platdata,
-};
-#endif
 
 struct msg_get_arm_mem {
 	struct bcm2835_mbox_hdr hdr;
diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
index bda4e95..3db6ff1 100644
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
@@ -1,6 +1,8 @@
 CONFIG_ARM=y
 CONFIG_ARCH_BCM283X=y
 CONFIG_TARGET_RPI_2=y
+CONFIG_DEFAULT_DEVICE_TREE="bcm2836-rpi-2-b"
+CONFIG_OF_EMBED=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
index 8e2c410..8111077 100644
--- a/configs/rpi_3_32b_defconfig
+++ b/configs/rpi_3_32b_defconfig
@@ -2,6 +2,8 @@ CONFIG_ARM=y
 CONFIG_ARCH_BCM283X=y
 CONFIG_TARGET_RPI_3_32B=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b"
+CONFIG_OF_EMBED=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
index b7354eb..9636bf5 100644
--- a/configs/rpi_3_defconfig
+++ b/configs/rpi_3_defconfig
@@ -2,6 +2,8 @@ CONFIG_ARM=y
 CONFIG_ARCH_BCM283X=y
 CONFIG_TARGET_RPI_3=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b"
+CONFIG_OF_EMBED=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index ea39231..878e73c 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -1,6 +1,8 @@
 CONFIG_ARM=y
 CONFIG_ARCH_BCM283X=y
 CONFIG_TARGET_RPI=y
+CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-b"
+CONFIG_OF_EMBED=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
-- 
2.6.2