[U-Boot] [PATCH v2 01/17] imx: iomux-v3: Fix build error with snvs base

[Jagan Teki]

On Sun, Sep 18, 2016 at 12:33 PM, Peng Fan <van.freenix at gmail.com> wrote:
> Hi Jagan,
> On Sat, Sep 17, 2016 at 02:18:33AM +0530, Jagan Teki wrote:
>>snvs base is added only for i.MX6ULL but the code is
>>added for common, so firing build error while compiling
>>other i.MX6 SOC's
>>
>>Issue observed with the below patch
>>"imx: mx6ull: Update memory map address"
>>(sha1: e8eac1b5b3a98a06426bc4867c03c38329841e5c)
>>
>>Build log:
>>  CC      arch/arm/imx-common/iomux-v3.o
>>arch/arm/imx-common/iomux-v3.c: In function 'imx_iomux_v3_setup_pad':
>>arch/arm/imx-common/iomux-v3.c:56:19: error: 'IOMUXC_SNVS_BASE_ADDR' undeclared (first use in this function)
>>    base = (void *)IOMUXC_SNVS_BASE_ADDR;
>
> CONFIG_IOMUX_LPSR is only needed for i.MX7 and i.MX6ULL now.
> CONFIG_IOMUX_LPSR is defined in your configuration?
> I did not meet such build error.

Observed this when I did imx6ul, will skip this this series.

thanks!
-- 
Jagan Teki
Free Software Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.