[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support

[york sun]

On 09/07/2016 03:08 AM, Gong Qianyu wrote:
> From: Mingkai Hu <mingkai.hu at nxp.com>
>
> LS1046ARDB Specification:
> -------------------------
> Memory subsystem:
>  * 8GByte DDR4 SDRAM (64bit bus)
>  * 512 Mbyte NAND flash
>  * Two 64 Mbyte high-speed SPI flash
>  * SD connector to interface with the SD memory card
>  * On-board 4G eMMC
>
> Ethernet:
>  * Two XFI 10G ports
>  * Two SGMII ports
>  * Two RGMII ports
>
> PCIe:
>  * PCIe1 (SerDes2 Lane0) to miniPCIe slot
>  * PCIe2 (SerDes2 Lane1) to x2 PCIe slot
>  * PCIe3 (SerDes2 Lane2) to x4 PCIe slot
>
> SATA:
>  * SerDes2 Lane3 to SATA port
>
> USB 3.0: one super speed USB 3.0 type A port
> 	 one Micro-AB port
>
> UART: supports two UARTs up to 115200 bps for console

The board specification doesn't belong to commit message. Instead, you 
can add what features have been supported, such as boot source, any 
important commands, special care to prepare the image, etc.

York