[U-Boot] [PATCH 4/4] ARM: tegra: enable Ethernet on p2771-0000

[Stephen Warren]

From: Stephen Warren <swarren at nvidia.com>

Enable the Ethernet device in DT, provide board-specific configuration,
and enable the driver in Kconfig.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
 arch/arm/dts/tegra186-p2771-0000.dtsi | 5 +++++
 configs/p2771-0000-000_defconfig      | 1 +
 configs/p2771-0000-500_defconfig      | 1 +
 3 files changed, 7 insertions(+)

diff --git a/arch/arm/dts/tegra186-p2771-0000.dtsi b/arch/arm/dts/tegra186-p2771-0000.dtsi
index d867674fd04e..41ef64479a99 100644
--- a/arch/arm/dts/tegra186-p2771-0000.dtsi
+++ b/arch/arm/dts/tegra186-p2771-0000.dtsi
@@ -25,6 +25,11 @@
 		reg = <0x0 0x80000000 0x0 0x60000000>;
 	};
 
+	ethernet at 2490000 {
+		status = "okay";
+		phy-reset-gpios = <&gpio_main TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>;
+	};
+
 	i2c at 3160000 {
 		status = "okay";
 	};
diff --git a/configs/p2771-0000-000_defconfig b/configs/p2771-0000-000_defconfig
index 4c4606a71ae7..339c29270279 100644
--- a/configs/p2771-0000-000_defconfig
+++ b/configs/p2771-0000-000_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_TEGRA186_BPMP_I2C=y
+CONFIG_DWC_ETH_QOS=y
 CONFIG_E1000=y
 CONFIG_RTL8169=y
 CONFIG_PCI_TEGRA=y
diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig
index b32df1cb0cf7..f9836aea42be 100644
--- a/configs/p2771-0000-500_defconfig
+++ b/configs/p2771-0000-500_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_TEGRA186_BPMP_I2C=y
+CONFIG_DWC_ETH_QOS=y
 CONFIG_E1000=y
 CONFIG_RTL8169=y
 CONFIG_PCI_TEGRA=y
-- 
2.9.3