[U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller

[Jagan Teki]

On Thu, Sep 8, 2016 at 7:51 PM, Michael Brandl
<michael.brandl at hs-augsburg.de> wrote:
> Dear U-Boot (SPI) Developers,
>
> this patch seems to be my only chance to get spi working without/before
> Linux.
>
> I'm a student from Augsburg (Germany) experimenting with the Hikey Board
> from 96boards.
> The hi6220 processor from HiSilicon isn't fully documented, there is just
> one document called Function Description:
> http://mirror.lemaker.org/Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdf
>
> U-Boot already supports the Hikey Board to be loaded from ARM Trusted
> Firmware (ATF) but only UART and SDMMC is supported by now.
> I cloned the u-boot-spi.git and tried to integrate this patch but I'm not
> experienced enough to adjust the specific config for the Hikey Board.

Please try to use u-boot.git and send the patch format.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.