[U-Boot] [PATCH v1 2/3] arm: mvebu: add DB-88F6820-AMC board

[Chris Packham]

On Mon, Sep 19, 2016 at 12:58 PM, Simon Glass <sjg at chromium.org> wrote:
> Hi Chris,
>
> On 13 September 2016 at 19:42, Chris Packham <judge.packham at gmail.com> wrote:
>> This board is a plug in card for Marvell's switch system development
>> kits. Form-factor aside it is similar to the DB-88F6820-GP with the
>> following differences.
>> - TCLK is 200MHz
>> - SPI1 is used
>> - No SATA
>> - No MMC
>> - NAND flash
>>
>> Signed-off-by: Chris Packham <judge.packham at gmail.com>
>> ---
>> I've used my work email address for the MAINTAINERS entry. Mainly
>> because it gives a better chance at finding someone else to contact
>> rather than a random gmail address.
>>
>> I've also left the copyright assignments to Stefan and Gregory since the
>> code was derived from the -GP board.
>>
>>  arch/arm/dts/Makefile                         |   1 +
>>  arch/arm/dts/armada-385-amc.dts               | 155 ++++++++++++++++++++++++++
>>  arch/arm/mach-mvebu/Kconfig                   |   7 ++
>>  board/Marvell/db-88f6820-amc/MAINTAINERS      |   6 +
>>  board/Marvell/db-88f6820-amc/Makefile         |   7 ++
>>  board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 129 +++++++++++++++++++++
>>  board/Marvell/db-88f6820-amc/kwbimage.cfg     |  12 ++
>>  configs/db-88f6820-amc_defconfig              |  38 +++++++
>>  include/configs/db-88f6820-amc.h              | 130 +++++++++++++++++++++
>>  9 files changed, 485 insertions(+)
>>  create mode 100644 arch/arm/dts/armada-385-amc.dts
>>  create mode 100644 board/Marvell/db-88f6820-amc/MAINTAINERS
>>  create mode 100644 board/Marvell/db-88f6820-amc/Makefile
>>  create mode 100644 board/Marvell/db-88f6820-amc/db-88f6820-amc.c
>>  create mode 100644 board/Marvell/db-88f6820-amc/kwbimage.cfg
>>  create mode 100644 configs/db-88f6820-amc_defconfig
>>  create mode 100644 include/configs/db-88f6820-amc.h
>
> The SPL_xxx_SUPPORT options have now moved to Kconfig, but other than that:
>
> Reviewed-by: Simon Glass <sjg at chromium.org>
>

Hi Simon,

Thanks for the review.  I've moved the SPL_*_SUPPORT to the defconfig
locally, I'll wait to see if there are any other comments before
sending a v2.