[U-Boot] [PATCH] Various, accumulated typos collected from around the tree.
Robert P. J. Day
rpjday at crashcourse.ca
Wed Sep 7 20:27:59 CEST 2016
Fix various misspellings of:
* deprecated
* partition
* preceding,preceded
* preparation
* its versus it's
* export
* existing
* scenario
* redundant
* remaining
* value
* architecture
Signed-off-by: Robert P. J. Day <rpjday at crashcourse.ca>
---
just rebased against master so it should apply, tried to CC various
relevant people depending on location of typos.
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 1864ab9..6b46078 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -45,7 +45,7 @@ static inline void *phys_to_virt(unsigned long x)
/*
* Virtual <-> DMA view memory address translations
* Again, these are *only* valid on the kernel direct mapped RAM
- * memory. Use of these is *depreciated*.
+ * memory. Use of these is *deprecated*.
*/
#define virt_to_bus(x) (__virt_to_bus((unsigned long)(x)))
#define bus_to_virt(x) ((void *)(__bus_to_virt((unsigned long)(x))))
@@ -127,7 +127,7 @@ static inline void *phys_to_virt(unsigned long x)
#endif
/*
- * We should really eliminate virt_to_bus() here - it's depreciated.
+ * We should really eliminate virt_to_bus() here - it's deprecated.
*/
#define page_to_bus(page) (virt_to_bus(page_address(page)))
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 78a7fac..3a4e902 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -132,7 +132,7 @@ struct tag_ramdisk {
/* describes where the compressed ramdisk image lives (virtual address) */
/*
* this one accidentally used virtual addresses - as such,
- * its depreciated.
+ * it's deprecated.
*/
#define ATAG_INITRD 0x54410005
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index ef08489..cabf64c 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -489,7 +489,7 @@ static void dump_spd_ddr_reg(void)
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
fsl_ddr_get_spd(spd[i], i, CONFIG_DIMM_SLOTS_PER_CTLR);
- puts("SPD data of all dimms (zero vaule is omitted)...\n");
+ puts("SPD data of all dimms (zero value is omitted)...\n");
puts("Byte (hex) ");
k = 1;
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
@@ -543,7 +543,7 @@ static void dump_spd_ddr_reg(void)
}
}
printf("DDR registers dump for all controllers "
- "(zero vaule is omitted)...\n");
+ "(zero value is omitted)...\n");
puts("Offset (hex) ");
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF);
diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c
index 48d207f..4a3d094 100644
--- a/board/technexion/twister/twister.c
+++ b/board/technexion/twister/twister.c
@@ -140,7 +140,7 @@ int board_mmc_init(bd_t *bis)
#ifdef CONFIG_SPL_OS_BOOT
/*
- * Do board specific preperation before SPL
+ * Do board specific preparation before SPL
* Linux boot
*/
void spl_board_prepare_for_linux(void)
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 965252f..f785dbe 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -157,7 +157,7 @@ int board_eth_init(bd_t *bis)
#ifdef CONFIG_SPL_OS_BOOT
/*
- * Do board specific preperation before SPL
+ * Do board specific preparation before SPL
* Linux boot
*/
void spl_board_prepare_for_linux(void)
diff --git a/cmd/nvedit.c b/cmd/nvedit.c
index b67563b..9ca5cb5 100644
--- a/cmd/nvedit.c
+++ b/cmd/nvedit.c
@@ -15,7 +15,7 @@
*
* The "environment" is stored on external storage as a list of '\0'
* terminated "name=value" strings. The end of the list is marked by
- * a double '\0'. The environment is preceeded by a 32 bit CRC over
+ * a double '\0'. The environment is preceded by a 32 bit CRC over
* the data part and, in case of redundant environment, a byte of
* flags.
*
@@ -838,7 +838,7 @@ static int do_env_delete(cmd_tbl_t *cmdtp, int flag,
* With "-c" and size is NOT given, then the export command will
* format the data as currently used for the persistent storage,
* i. e. it will use CONFIG_ENV_SECT_SIZE as output block size and
- * prepend a valid CRC32 checksum and, in case of resundant
+ * prepend a valid CRC32 checksum and, in case of redundant
* environment, a "current" redundancy flag. If size is given, this
* value will be used instead of CONFIG_ENV_SECT_SIZE; again, CRC32
* checksum and redundancy flag will be inserted.
@@ -847,12 +847,12 @@ static int do_env_delete(cmd_tbl_t *cmdtp, int flag,
* terminating '\0' byte) will be written; here the optional size
* argument will be used to make sure not to overflow the user
* provided buffer; the command will abort if the size is not
- * sufficient. Any remainign space will be '\0' padded.
+ * sufficient. Any remaining space will be '\0' padded.
*
* On successful return, the variable "filesize" will be set.
* Note that filesize includes the trailing/terminating '\0' byte(s).
*
- * Usage szenario: create a text snapshot/backup of the current settings:
+ * Usage scenario: create a text snapshot/backup of the current settings:
*
* => env export -t 100000
* => era ${backup_addr} +${filesize}
@@ -970,7 +970,7 @@ sep_err:
/*
* env import [-d] [-t [-r] | -b | -c] addr [size]
* -d: delete existing environment before importing;
- * otherwise overwrite / append to existion definitions
+ * otherwise overwrite / append to existing definitions
* -t: assume text format; either "size" must be given or the
* text data must be '\0' terminated
* -r: handle CRLF like LF, that means exported variables with
diff --git a/common/board_f.c b/common/board_f.c
index da381db..a93a4ba 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -1052,7 +1052,7 @@ void board_init_f(ulong boot_flags)
{
#ifdef CONFIG_SYS_GENERIC_GLOBAL_DATA
/*
- * For some archtectures, global data is initialized and used before
+ * For some architectures, global data is initialized and used before
* calling this function. The data should be preserved. For others,
* CONFIG_SYS_GENERIC_GLOBAL_DATA should be defined and use the stack
* here to host global data until relocation.
@@ -1064,7 +1064,7 @@ void board_init_f(ulong boot_flags)
/*
* Clear global data before it is accessed at debug print
* in initcall_run_list. Otherwise the debug print probably
- * get the wrong vaule of gd->have_console.
+ * get the wrong value of gd->have_console.
*/
zero_global_data();
#endif
diff --git a/common/env_common.c b/common/env_common.c
index 560cad0..7fb62e8 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -226,7 +226,7 @@ int env_import(const char *buf, int check)
return 0;
}
-/* Emport the environment and generate CRC for it. */
+/* Export the environment and generate CRC for it. */
int env_export(env_t *env_out)
{
char *res;
diff --git a/drivers/bios_emulator/x86emu/ops.c b/drivers/bios_emulator/x86emu/ops.c
index 5752fee..ba18135 100644
--- a/drivers/bios_emulator/x86emu/ops.c
+++ b/drivers/bios_emulator/x86emu/ops.c
@@ -41,7 +41,7 @@
* to the 256 byte-"opcodes" found on the 8086. The table which
* dispatches this is found in the files optab.[ch].
*
-* Each opcode proc has a comment preceeding it which gives it's table
+* Each opcode proc has a comment preceding it which gives it's table
* address. Several opcodes are missing (undefined) in the table.
*
* Each proc includes information for decoding (DECODE_PRINTF and
diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c
index fd0c4f7..6125bbb 100644
--- a/drivers/crypto/fsl/jobdesc.c
+++ b/drivers/crypto/fsl/jobdesc.c
@@ -41,7 +41,7 @@ uint32_t secmem_set_cmd(uint32_t sec_mem_cmd)
/*!
* CAAM page allocation:
* Allocates a partition from secure memory, with the id
- * equal to partion_num. This will de-allocate the page
+ * equal to partition_num. This will de-allocate the page
* if it is already allocated. The partition will have
* full access permissions. The permissions are set before,
* running a job descriptor. A memory page of secure RAM
diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c
index 80ef050..7e0749f 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training.c
@@ -1302,7 +1302,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type,
}
if (mem_mask != 0) {
- /* motib redundent in KW28 */
+ /* motib redundant in KW28 */
CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type,
if_id,
CS_ENABLE_REG, 0, 0x8));
diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c
index b718481..ca11396 100644
--- a/drivers/net/4xx_enet.c
+++ b/drivers/net/4xx_enet.c
@@ -899,7 +899,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
* current transfer) have got the time to arrived before
* netloop calls eth_halt
*/
- printf ("About preceeding transfer (eth%d):\n"
+ printf ("About preceding transfer (eth%d):\n"
"- Sent packet number %d\n"
"- Received packet number %d\n"
"- Handled packet number %d\n",
diff --git a/drivers/spi/fsl_dspi.c b/drivers/spi/fsl_dspi.c
index c8dcb27..f213587 100644
--- a/drivers/spi/fsl_dspi.c
+++ b/drivers/spi/fsl_dspi.c
@@ -594,7 +594,7 @@ static int fsl_dspi_claim_bus(struct udevice *dev)
priv = dev_get_priv(bus);
- /* processor special prepartion work */
+ /* processor special preparation work */
cpu_dspi_claim_bus(bus->seq, slave_plat->cs);
/* configure transfer mode */
diff --git a/include/environment.h b/include/environment.h
index 1fdbdad..b602e8a 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -16,10 +16,9 @@
* shifts the remaining entries to the front. Replacing an entry is a
* combination of deleting the old value and adding the new one.
*
- * The environment is preceeded by a 32 bit CRC over the data part.
+ * The environment is preceded by a 32 bit CRC over the data part.
*
- **************************************************************************
- */
+ *************************************************************************/
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
diff --git a/include/s_record.h b/include/s_record.h
index 6db7174..81245ba 100644
--- a/include/s_record.h
+++ b/include/s_record.h
@@ -29,7 +29,7 @@
* 2 data record with 24-bit address
* 3 data record with 32-bit address
* 4 symbol record (LSI extension)
- * 5 number of data records in preceeding block
+ * 5 number of data records in preceding block
* 6 unused
* 7 ending record for S3 records
* 8 ending record for S2 records
diff --git a/lib/hashtable.c b/lib/hashtable.c
index 4e52b36..afd2305 100644
--- a/lib/hashtable.c
+++ b/lib/hashtable.c
@@ -499,7 +499,7 @@ int hdelete_r(const char *key, struct hsearch_data *htab, int flag)
*
* If the separator character is different from NUL, then any
* separator characters and backslash characters in the values will
- * be escaped by a preceeding backslash in output. This is needed for
+ * be escaped by a preceding backslash in output. This is needed for
* example to enable multi-line values, especially when the output
* shall later be parsed (for example, for re-import).
*
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 24831b3..84f5756 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -4263,7 +4263,7 @@ sub process {
}
}
-# check for case / default statements not preceeded by break/fallthrough/switch
+# check for case / default statements not preceded by break/fallthrough/switch
if ($line =~ /^.\s*(?:case\s+(?:$Ident|$Constant)\s*|default):/) {
my $has_break = 0;
my $has_statement = 0;
@@ -4284,7 +4284,7 @@ sub process {
}
if (!$has_break && $has_statement) {
WARN("MISSING_BREAK",
- "Possible switch case/default not preceeded by break or fallthrough comment\n" . $herecurr);
+ "Possible switch case/default not preceded by break or fallthrough comment\n" . $herecurr);
}
}
diff --git a/tools/fdtgrep.c b/tools/fdtgrep.c
index 8d3fef4..b907827 100644
--- a/tools/fdtgrep.c
+++ b/tools/fdtgrep.c
@@ -405,7 +405,7 @@ static int display_fdt_by_regions(struct display_info *disp, const void *blob,
* The output of this function may or may not be a valid FDT. To ensure it
* is, these disp->flags must be set:
*
- * FDT_REG_SUPERNODES: ensures that subnodes are preceeded by their
+ * FDT_REG_SUPERNODES: ensures that subnodes are preceded by their
* parents. Without this option, fragments of subnode data may be
* output without the supernodes above them. This is useful for
* hashing but cannot produce a valid FDT.
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
More information about the U-Boot
mailing list